Midwest Turbo & Performance

Midwest Turbo & Performance Welcome all to the new page. This is the official page of Midwest Turbo & Performance and the Home of Centrifugal Specialties Superchargers.

The old MTP page has been retired, all future news and product updates will be posted here.

Still have plenty of work to do, but we are finally making some progress on the shop car. Got the new Wilson Manifolds H...
05/17/2026

Still have plenty of work to do, but we are finally making some progress on the shop car. Got the new Wilson Manifolds High Boost 123mm throttle body and elbow on along with a charge pipe and a pair of Motion Raceworks bypass valves. Also finished on the conversion from distributor to COP ignition. Still need to get the -12 fuel rails, surge tank, belt drive pump and larger injectors installed before it is ready to make some noise..

Still have some work to do, but our blower dyno/run-in stand is nearly ready for action…
04/22/2026

Still have some work to do, but our blower dyno/run-in stand is nearly ready for action…

Cheap oil isn’t good, and good oil isn’t cheap… If you’re looking for a source for oil for your centrifugal supercharger...
03/26/2026

Cheap oil isn’t good, and good oil isn’t cheap… If you’re looking for a source for oil for your centrifugal supercharger we’ve got plenty in stock. More details available at CentriSpec.net

For those of you running Vortech superchargers, we do have parts in stock for V-20 and V-30 setups for our X-10 drives. ...
03/18/2026

For those of you running Vortech superchargers, we do have parts in stock for V-20 and V-30 setups for our X-10 drives. Contact us at [email protected] for additional information.

03/14/2026

Just received a batch of updated 121 ams 130 impellers. We’ve got more in hand ready for additional builds. More details available at www.centrispec.net

Got some updated impeller designs in and just wrapping up an R121X update and a R130X build.. We’ve got more in stock an...
03/14/2026

Got some updated impeller designs in and just wrapping up an R121X update and a R130X build.. We’ve got more in stock and ready to assemble.. more info available on our website at www.centrispec.net

Looking to save a few $$ on an X-10, let us know. We've got a unit that has a small amount of run time on it (used to ru...
02/25/2026

Looking to save a few $$ on an X-10, let us know. We've got a unit that has a small amount of run time on it (used to run in/test superchargers on our shop car) that we'll discount $500 off the usual price. If you're on the fence about picking up a drive, we've got this one ready to go. These usually sell pretty quick, so don't wait too long.. We've also got a couple of trade in/test superchargers (1ea R106 and R112) that we can package with this drive at a further discount if interested - just let us know..

02/23/2026

Congratulations to Nick Kokkas who ran a couple of personal bests this weekend with his X-10/R106X combo on his DiSomma Racing Engines powered X275 Mustang, running 4.2X's on multiple runs, even lifting early - all in less-than-stellar air. Running .9X 60' times with stock suspension, he definitely has the car working well. This R106X blower is starting its 3rd season on the same bearings, gears, etc. and looks like new every time we inspect it.. We've got parts to build you the exact same drive and blower, on the shelf today, contact us here or by email at [email protected]

02/15/2026

Centrifugal Specialties X-10 gear drive - for ProCharger, Centrifugal specialties and other superchargers.. Adapters available for a variety of engine platform

With all the supercharger development going on, we haven’t posted any gear drive updates in a while. This shows the late...
02/15/2026

With all the supercharger development going on, we haven’t posted any gear drive updates in a while. This shows the latest iteration of our X-10 gear drive (absent the blower plate and stands) , with one of our updated dual hex accessory drives. We’ve simplified the accessory drive a bit and added additional bosses to the X-10 to permit accessories to be raised to clear double frame rails, etc. on tube chassis cars, etc. Parts are in stock and ready to ship ASAP.

Address

Belton, MO

Telephone

+18166071455

Website

Alerts

Be the first to know and let us send you an email when Midwest Turbo & Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Midwest Turbo & Performance:

Shortcuts

Share

Category