Epicenter Design LLC

Epicenter Design LLC Motorsport engineering services, 3D scanning, custom part design, machining, and fabrication.

The finished product looks good. Only three more to do.
05/30/2026

The finished product looks good. Only three more to do.

05/30/2026

This afternoon's project is fitting new rotors to the existing RT4 brake hats. Need precision machining on your racecar project? Epicenter Design LLC should be your first call. 269-506-4016 Design.Build.Race



Some days I'm working on really great racecars, other days I'm working on the trailer. Added new interior lights and ne...
05/11/2026

Some days I'm working on really great racecars, other days I'm working on the trailer. Added new interior lights and new running lights on the outside. Next up is running the tail light wires on the inside so the squirrels can't chew on them anymore. It's all part of the adventure! Many thanks to Travis DiTulio for all of your help! Getting ready for Gingerman!



The Ralt keeps giving me Easter eggs! The Aluminum engine mount plates have huge cracks where they were formed. An inc...
04/27/2026

The Ralt keeps giving me Easter eggs! The Aluminum engine mount plates have huge cracks where they were formed. An incorrect alloy was used, 6061-T6 probably. Also, one of the bracket mounting bolts is very loose, see the red arrow. Need help with your racecar? Contact me! Design.Build.Race



What a beautiful sight! Nice BBS wheels wrapped in new(ish) Hoosier race rubber! No, they don't belong on FV directly ...
04/13/2026

What a beautiful sight! Nice BBS wheels wrapped in new(ish) Hoosier race rubber! No, they don't belong on FV directly behind. 😆. More bits for the Ralt Formula Atlantic that's in the shop. Racecars are all I do... need help? Contact me 269-506-4016



The Kellison is getting some race prep today! It completed the season last year in good shape so the "to do" list is re...
04/12/2026

The Kellison is getting some race prep today! It completed the season last year in good shape so the "to do" list is relatively short. I disassembled the front end and corrected something that should result in more front grip. Change a few fluids, do an alignment, nut and bolt, and clean it up. Gingerman is just 4-1/2 weeks away, are you ready?! If you need help, let me know. 269-506-4016. Design.Build.Race



Why would someone install a fuel cell and not include foam in the cell? I guess the foam can't get old and deteriorate ...
03/29/2026

Why would someone install a fuel cell and not include foam in the cell? I guess the foam can't get old and deteriorate if it isn't there... 😲. I suppose this shouldn't surprise me after 25 years. Foam is an inexpensive part of the overall safety of a racecar. It also improves handling by slowing weight transfer caused by fuel moving around. Need help with your racecar? Contact me!




Ummm, no. Someone wasn't paying attention. 😳. Driver complained about the brakes... 😲
03/28/2026

Ummm, no. Someone wasn't paying attention. 😳. Driver complained about the brakes... 😲


Ralt Rt4 sans bodywork undergoing an inspection. It's new to the owner and has been in storage for awhile. We're going...
03/28/2026

Ralt Rt4 sans bodywork undergoing an inspection. It's new to the owner and has been in storage for awhile. We're going over the car measuring, photographing, and documenting. Need help with your racecar? Epicenter Design LLC can help! 269-506-4016



I built this inexpensive chassis table and stands for the Europa project. It's pretty flat, has grid lines every six inc...
03/21/2026

I built this inexpensive chassis table and stands for the Europa project. It's pretty flat, has grid lines every six inches, and four coats of polyurethane to reduce grimey hand prints. Once the new suspension, engine, and gearbox have been test fitted, everything will be disassembled. The chassis will then be media blasted and painted. I'm also assembling a new engine for this project. Need help with your car project? Epicenter Design LLC can help! 269-506-4016

Address

11027 Bricker Road
Belding, MI
48809

Opening Hours

Monday 8am - 7pm
Tuesday 8am - 7pm
Wednesday 8am - 7pm
Thursday 8am - 7pm
Friday 8am - 7pm
Saturday 9am - 5pm
Sunday 9am - 5pm

Telephone

+12695064016

Website

Alerts

Be the first to know and let us send you an email when Epicenter Design LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Epicenter Design LLC:

Shortcuts

Share

Category