Kaiser Performance

Kaiser Performance Kaiser Performance has been around since 2003 doing basic differential rebuilds to re gearing, L*D, spools, 9" ends, narrowing and straightening.
(1)

Custom length Ford 9" axle. Customer said it shot out of the housing a couple inches after he removed the retainer and t...
05/28/2026

Custom length Ford 9" axle. Customer said it shot out of the housing a couple inches after he removed the retainer and tapped it with a hammer. Found that the axle shaft was slightly too long causing it to bottom out in the diff. Not good for the diff, axle bearing and opposite carrier bearing.

05/26/2026

No reason to put a new bearing on this axle.

GM 14 bolt semi float done with a Detroit Truetrac, disc brake conversion and bearings throughout going into this K20 pu...
05/21/2026

GM 14 bolt semi float done with a Detroit Truetrac, disc brake conversion and bearings throughout going into this K20 pu.

GM 14 bolt full float done with a Yukon Grizzly lunchbox locker, Motive 4.10 gears and bearings throughout going into th...
05/21/2026

GM 14 bolt full float done with a Yukon Grizzly lunchbox locker, Motive 4.10 gears and bearings throughout going into this 86 K5 Blazer.

87 Caprice before and after 3" narrow. Tucked!
05/20/2026

87 Caprice before and after 3" narrow. Tucked!

GM 7.5 narrowed 3" total, new 1541H axles and freshened up going into this 87 Caprice.
05/15/2026

GM 7.5 narrowed 3" total, new 1541H axles and freshened up going into this 87 Caprice.

Ford 9" done with a Truetrac, Motive Performance 3.50 gears, Timken bearing kit, new passenger side axle shaft and Green...
05/15/2026

Ford 9" done with a Truetrac, Motive Performance 3.50 gears, Timken bearing kit, new passenger side axle shaft and Green bearings going into this 428 powered 67 Mustang fastback.

Ford 8" done with a Duragrip, Motive Performance 3.00 gears and Timken bearing kit going into this 65 Mustang fastback.
05/13/2026

Ford 8" done with a Duragrip, Motive Performance 3.00 gears and Timken bearing kit going into this 65 Mustang fastback.

GM 8.6" done with a Truetrac, Motive Performance 3.73 gears, 1541H axle shafts, bearings and straightened. Going into an...
05/13/2026

GM 8.6" done with a Truetrac, Motive Performance 3.73 gears, 1541H axle shafts, bearings and straightened. Going into an 01 Silverado.

Ford 9" housing narrowed 4" total and custom length 1541H axle shafts going into this 62 Corvette.
05/08/2026

Ford 9" housing narrowed 4" total and custom length 1541H axle shafts going into this 62 Corvette.

Ford 8.8 done with Ford Performance 3.73 gears, solid spacer and bearing kit. Also running an L*D lockout which utilizes...
04/28/2026

Ford 8.8 done with Ford Performance 3.73 gears, solid spacer and bearing kit. Also running an L*D lockout which utilizes special clutch plates that lock the side gears to the carrier and eliminates the spider gears. Going into this DOHC Cobra motor powered 96 Mustang.

Address

3950 SW 208th Court
Beaverton, OR
97078

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+15033695037

Website

Alerts

Be the first to know and let us send you an email when Kaiser Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category