Midwest Air-Cooled & Machine LLC

Call Directions Contact the business

Midwest Air-Cooled & Machine LLC Specializing ONLY in Air-Cooled VWs! Service work, full machine shop, in house engine dyno! We also offer metal work and rust repair.

Specializing in air-cooled VWs of any model: Bug, Ghia, Bus, Type 3, VW powered dune buggies or kit cars. If it has an air-cooled engine in it, or was built out of a Volkswagen, we can perform any kind of repair or restoration work needed. From tune ups, electrical system repair, or brake work, to interior/exterior finish work, and everything in between.

We have an in house machine shop and build engines in any configuration from 36hp to stroker 2300cc+. Naturally aspirated or turbo. We have built hundreds upon hundreds of these engines and can build you a combination to suit street, strip, off road, or for a dependable daily driver. From the machine work, assembly, turbo system fab work, to carb tuning... Its all done here at Midwest Air-Cooled.

We rebuild all types of VW transaxles: swing axle Bug, swing axle early Bus w/ reduction boxes, IRS, and Bus 3/5/6 rib. Stock and performance builds are available.

Over 50 years of professional experience with air-cooled VWs between all of us at the shop. There isn't a nut or bolt we haven't touched on these cars.

We operate with the "quality over quantity" mindset. All our work is done right, and we stand behind it. All of our engines are backed by a warranty. Check out our feedback rating and take a look at the comments left by our customers.

Business hours are listed as M-F, however we are available Saturdays by appointment for pick up or drop off of vehicles. We will do our best to work around your schedule, just give us a call!

Here's something we don't have through the shop often.. This is a Super 1600 for a    . It came in for carb work and tun...
11/17/2026

Here's something we don't have through the shop often.. This is a Super 1600 for a . It came in for carb work and tuning on the dyno.

Just finished up this '76   including engine work, front beam replacement, along with various other maintenance items.  ...
11/13/2026

Just finished up this '76 including engine work, front beam replacement, along with various other maintenance items.

Plenty of   Beetles in the shop today for various work from brakes, transmission work, to complete mechanical restoratio...
11/02/2026

Plenty of Beetles in the shop today for various work from brakes, transmission work, to complete mechanical restoration. The black oval in the foreground is scheduled to get a CSP rack and pinion steering conversion. Its gonna be an interesting week here at midwestaircooled

Getting this thickwall 1835cc finished up today on the dyno for a customers
10/28/2026

Getting this thickwall 1835cc finished up today on the dyno for a customers

Still plenty going on at midwestaircooled this Fall.. Trying to get these VW's turned out so folks can enjoy them in the...
10/12/2026

Still plenty going on at midwestaircooled this Fall.. Trying to get these VW's turned out so folks can enjoy them in the beautiful weather!

09/24/2026

Turbo 2232cc is finally dialed in. This one was quite the fight, but we eventually won the war. This is running an under the decklid turbo system with an intercooler behind the fan shroud. Holley fuel injection with timing control makes for very smooth driveability. Turbo is hidden behind the rear apron, with great ground clearance thanks to a stainless Turbo header from Tiger Vasquez

Sean's sweet   is ready for fall cruising after some engine work. Unfortunately the first engine we built had a flywheel...
09/22/2026

Sean's sweet is ready for fall cruising after some engine work. Unfortunately the first engine we built had a flywheel issue that ultimately required replacing the flywheel and crankshaft. We pulled, rebuilt, dyno'd, and reinstalled the engine on our dime. Things may not always go as planned, but we always stand behind our work 👌

Mechanical restoration finished up on this   now headed to the body shop. Kept the original fuel injection setup on the ...
09/14/2026

Mechanical restoration finished up on this now headed to the body shop. Kept the original fuel injection setup on the engine, which we dyno tuned before install.

Plenty going on today at Midwest Air-Cooled... We still have a substantial backlog of VW's waiting to come in, so if you...
09/08/2026

Plenty going on today at Midwest Air-Cooled... We still have a substantial backlog of VW's waiting to come in, so if you've been putting off work on your thinking it would be a "winter project", call us to get in line now!

We've got some parts left over from a couple jobs for sale:EMPI 2.5" drop spindle King Pin wide 5/Porsche pattern disc b...
08/25/2026

We've got some parts left over from a couple jobs for sale:

EMPI 2.5" drop spindle King Pin wide 5/Porsche pattern disc brake kit (spindles already rebuilt with new king and link pins). This is a brand new kit that was never installed, all parts included. Will need a set of KP spindles in exchange for the knuckles. $800 for the kit, which between the kit, king pins, and link pins you're getting the spindle rebuild labor for free.

Good used set of 5.7" Chevy journal H beam rods, 5/16 bolts. Rods don't have much time on them, bushings are tight. We changed up the engine combo on a build. These are out there for around $400 for the set. Selling for $200

Address

7280 Old Missouri 21 (Building #2)
Barnhart, MO
63012

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm

Telephone

+13147756000

Website

Alerts

Be the first to know and let us send you an email when Midwest Air-Cooled & Machine LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Midwest Air-Cooled & Machine LLC:

Shortcuts

Share

Nearby autos & automotive services