Mutt Chassis

Mutt Chassis Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Mutt Chassis, Automotive, aircraft & boat, 10572 180th, Barnesville, MN.

Here's a few pictures of the last build throughout the process
03/14/2023

Here's a few pictures of the last build throughout the process

New build just about complete. Reworked the passenger side Door bars on this one. Always trying to improve the design.
01/23/2022

New build just about complete. Reworked the passenger side Door bars on this one. Always trying to improve the design.

The chromoly bumper is about half the weight of the old one.
04/05/2021

The chromoly bumper is about half the weight of the old one.

Before and after weigh in
04/05/2021

Before and after weigh in

I had to replace a few tubes on my front end after last year so I mixed in some chromoly tubing to save some weight. Usi...
04/05/2021

I had to replace a few tubes on my front end after last year so I mixed in some chromoly tubing to save some weight. Using the same tube layout the chromoly tubes shaved off almost 40lbs total! I am very happy with the results and will see how it holds up this year

Here is a few build pictures
01/04/2021

Here is a few build pictures

Laying down a few beads. Wouldn't want to build a nice cage on top of the partially welded stock frame seams.
11/22/2020

Laying down a few beads. Wouldn't want to build a nice cage on top of the partially welded stock frame seams.

This was my first year racing in the street stock class. The car i ran was a previously raced mutt chassis. I did not ma...
10/15/2020

This was my first year racing in the street stock class. The car i ran was a previously raced mutt chassis. I did not make any changes to the way it was setup just raced it and tried to learn each week. I finished 2nd in points at the I94. I still have a lot more to learn but these cars handle very well and was easy to get into and be competitive with. The chassis's that I am building now are the same as the originals so they will handle the same as anyone who has ran a mutt in the past. Great cars and I am excited for next year to race it again and make more improvements.

2020 stock car cage pricing is $2500 for an uncoated chassis. All chassis builds include metric frame with many differen...
08/30/2020

2020 stock car cage pricing is $2500 for an uncoated chassis. All chassis builds include metric frame with many different tabs and provisions for body mounting, hood and trunk pins, window net, steering wheel bracket, seat belts, battery tray, lower radiator support, plates for rear and front bumper, will mount customer supplied fuel cell.

Powder coating is an additional $450

Metric frame no core charge is $400

All cars are built to order. With free delivery within Mn, Nd, and Sd.Please contact me with any other questioSD. These cars are well built and great handling.

Here are a few pictures of the frames that were done so far. They are built in a jig using 1.75 tubes for the main cage ...
08/11/2020

Here are a few pictures of the frames that were done so far. They are built in a jig using 1.75 tubes for the main cage so legal for both wissota and imca

07/03/2020

Building the original Mutt Chassis. Wissota street stock, pure stock imca stock car, hobby stock chassis

Address

10572 180th
Barnesville, MN
56514

Telephone

+12187903459

Website

Alerts

Be the first to know and let us send you an email when Mutt Chassis posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category