FuelTech USA

Call Directions Website

FuelTech USA Industry Leading Engine Management Systems and Performance Components. FuelTech is built around providing excellent tech support.
(246)

Founded in 2003, the company wanted to bring simplicity and control to the modern fuel injected engine. The development of new EFI system solutions, combined with a steady growth over the years, allowed the company to quickly establish itself as the leading manufacturer of EFI systems in South America. Since the beginning, FuelTech has been developing new technology to bring various solutions to the automotive racing market. Over the years, the company has built a reputation of creating advanced electronic systems and high performance products that are user friendly and exceeded customers expectations. In 2010, the company defined a new way of ECU "Real time control" by integrating the engine management system with a color touch screen LCD display, taking the industry by surprise. A dedicated team of engineers at FuelTech have always followed the automotive market closely. As a result, many diverse products have been developed to help people with their high performance needs. From engine management systems focusing on controlling fuel and timing to boost controllers, traction control, dataloggers, widebands, and many more simple to use solutions help complete the company’s product catalog. Every installation is different and therefore can present its own set of challenges for customers. FuelTech has a specialized tech support staff that is always ready to answer your question by phone, email and at the race track. Personalized expert advice is always available through the company network. FuelTech has opened a new USA facility based out of Ball Ground, GA, in addition to its headquarters in Brazil. FuelTech USA operates as a distribution center for various markets such as North America, Central America, Australia and the Middle East. Much of the research and development of FuelTech’s latest systems was completed at FuelTech USA. Working hand in hand with major race teams in the USA allows the company to continue development of new technologies and refine existing systems. Nearly all FuelTech products are manufactured in Brazil at the company’s headquarters just like they were 10+ years ago when they were in their infancy. This helps ensure the highest quality standard and provide customers with the latest technology to help achieve their goals. FuelTech products deliver more than just simplified control solutions. They create confidence and provide results for customers on and off the race track!

10/16/2026

FuelTech Vision 3.0 brings new features and practical improvements, from VE-based fuel control with closed-loop learning to automatic electronic throttle calibration, faster map transfers, and high-pressure fuel pump control for direct injection (GDI)! 💻🔥

Jacob from our Tech Support team walks you through some of the key features and improvements in this major update.

Check out the video, then head to FuelTech.net for the full breakdown and download the update for free!

10/15/2026

You’ve seen the photos. Now turn the sound up. 🔊

Check out Injected Engineering’s twin-turbo shop truck during its dyno session here at FuelTech USA. A built L+M 5.0, a Hellion Twin Turbo Kit, and our FT700 ECU handling engine management. 💪

BIG NEWS FOR THE NEXT GENERATION OF DRAG RACERS! 🏁The NHRA is opening the door to FuelTech EFI in the Jr. Drag Racing Le...
10/14/2026

BIG NEWS FOR THE NEXT GENERATION OF DRAG RACERS! 🏁

The NHRA is opening the door to FuelTech EFI in the Jr. Drag Racing League!

Under the latest rule amendments, the FuelTech FT450 EFI is listed as a permitted fuel injection system, specifically with software version 5.55.

The updated rules also require the FuelTech IGN1A Inductive Smart Coil for EFI-equipped entries and permit pressurized fuel systems when using the approved FT450 setup.

This is a major step forward for Jr. Drag Racing, bringing modern engine management and precise electronic fuel control to the next generation of racers.

The future of drag racing starts here!

Check the official NHRA rulebook amendments for complete requirements and effective dates.

Truck Tuesday at FuelTech USA! 🔥Check out Jesse Oxendine's Chevrolet S-10, built and brought to our dyno by David Reese ...
10/13/2026

Truck Tuesday at FuelTech USA! 🔥

Check out Jesse Oxendine's Chevrolet S-10, built and brought to our dyno by David Reese of Reese Brothers Race Cars.

Jessie Oxendine
Reese Brothers Race Cars Shop

This N/T truck packs an XRE Hemi and a full lineup of FuelTech products:

• FT600 ECU
• FTSPARK-8 GEN3 MAX2000
• CDI Racing Ignition Coils
• FT Injector 1020 lb/h
• Peak & Hold PRO Injector Driver
• NanoPRO Wideband O2 Sensor Controller
• EGT-4 CAN
• FT Input Expander
• Travel Sensor
• SwitchPanel-8

Swipe through for a closer look at the build! 👉

Thanks to Jesse and David for trusting FuelTech with this S-10.

10/13/2026

Congrats Carbon65 Racing and Xtreme Racing Engines on this achievement! 👏🏻

Frank’s C7 PRO275 Corvette just made 5,406HP to the Hub! The new setup consisting of HPT Twin Turbocharger XRE Hemi and managed with our FT600 ECU, we can’t wait to see what the team will be able to lay down at the track! 🔥

FuelTech Vision 3.0 is now available! 🏁Update your software and explore the latest features designed to give you even mo...
10/08/2026

FuelTech Vision 3.0 is now available! 🏁

Update your software and explore the latest features designed to give you even more tuning capabilities.

Download it for free at fueltech.net and check out the full list of updates.

10/08/2026

We’re proud to introduce the FT470: our new flexible VisionFT ECU! 🚀

Built to adapt to a wide range of applications, from motorcycles to V8s with fully sequential injection. More integrated features, less complexity, and FuelTech Vision on the screen of your choice: smartphone, tablet, laptop, or Android head unit.

VisionFT technology, with the flexibility your build needs.

Discover the FT470 at fueltech.net

10/07/2026

A new chapter is about to begin. Tomorrow.

Now that the weather’s cooling down, it's time to get into boost season! 🔥  Injected Engineering stopped in for a dyno s...
10/06/2026

Now that the weather’s cooling down, it's time to get into boost season! 🔥 

 Injected Engineering stopped in for a dyno session with their twin-turbo F-150, featuring a built L+M Long Block 5.0 and a Hellion Twin Turbo Kit.

Our FT700 ECU handles engine management, with a SwitchPanel-8 Mini, EGT-4 CAN, Travel Sensor, Peak & Hold PRO, and CDI Racing Ignition Coils rounding out the FuelTech setup. 💪

 Swipe through for a closer look at their not-so-average shop truck! ➡️

 

Address

455 Wilbanks Drive
Ball Ground, GA
30107

Opening Hours

Monday 8:30am - 12:30pm
1:30pm - 5:30pm
Tuesday 8:30am - 12:30pm
1:30pm - 5:30pm
Wednesday 8:30am - 12:30pm
1:30pm - 5:30pm
Thursday 8:30am - 12:30pm
1:30pm - 5:30pm
Friday 8:30am - 12:30pm
1:30pm - 5:30pm

Telephone

+16784933835

Alerts

Be the first to know and let us send you an email when FuelTech USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share