Curtis Customs

Curtis Customs We will install lift kits, lowering kits, air ride, ls swap just to name a few things!

Getting the wiring laid out!
12/11/2024

Getting the wiring laid out!

Got the core support brackets modified and welded to the Camaro frame. So all the sheet metal fits and just need to work...
12/10/2024

Got the core support brackets modified and welded to the Camaro frame. So all the sheet metal fits and just need to work on the bumper brackets. Starting to look like a truck again! If you’re interested in buying this beauty contact me and we can chat!

Got the exhaust all installed and welded on to the front crossmember!
12/10/2024

Got the exhaust all installed and welded on to the front crossmember!

Got the transmission crossmember modified and bolted in place. Got most of the exhaust done till I ran out of gas in the...
12/10/2024

Got the transmission crossmember modified and bolted in place. Got most of the exhaust done till I ran out of gas in the welder. Should get the exhaust finished up tomorrow. Then move on to getting the core support modified so it fits

Getting the CVF Racing pulleys all set up on the 73 Ford Ltd!!
12/05/2024

Getting the CVF Racing pulleys all set up on the 73 Ford Ltd!!

Got the rear suspension wrapped up except the shocks. Used an Explorer 8.8 rear end with s10 lowering springs and 99-06 ...
12/03/2024

Got the rear suspension wrapped up except the shocks. Used an Explorer 8.8 rear end with s10 lowering springs and 99-06 hangers and shackles. Also got it shortened to a swb by doing a z cut in the frame.

We are working remotely this week at my uncles shop. This is a shop project 55 Chevy truck. We did a Camaro subframe swa...
12/03/2024

We are working remotely this week at my uncles shop. This is a shop project 55 Chevy truck. We did a Camaro subframe swap 350/400 and a 8.8 rear end out of and Explorer. And shortened the frame to a short bed. This is available to buy as is or we can finish it to your liking. We will continue to work on it till it’s finished or we sell it contact us if you are interested! We can talk about details if you are interested!

No job too small! Sometimes they just need a new bumper!
11/18/2024

No job too small! Sometimes they just need a new bumper!

Shop truck doing shop truck things
10/26/2024

Shop truck doing shop truck things

Some parts showed up today!! Can’t wait to get it together!! And make some noise!!! Stay tuned!! CVF Racing Holley MSD ...
10/24/2024

Some parts showed up today!! Can’t wait to get it together!! And make some noise!!! Stay tuned!! CVF Racing Holley MSD Performance

Got this beautiful Ford LTD in yesterday to get back running for our customer!! 400 Ford with some goodies in the trunk!...
10/13/2024

Got this beautiful Ford LTD in yesterday to get back running for our customer!! 400 Ford with some goodies in the trunk! MSD ignition an aluminum radiator. And we will be ordering a CVF Racing pulley setup! Stay tuned!! Can’t wait to hear this beast come to life!

10/07/2024

Finishing Lines

Address

58355 220th Street
Austin, MN
55912

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+19522885953

Website

Alerts

Be the first to know and let us send you an email when Curtis Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category