TRMR Garage

10/28/2022

Be doing a live ride along shortly.

07/07/2022

Just a quick update on the V8 Focus RS. The og intake manifold was leaking coolant. Causing problems with spark plugs and getting into a couple intake ports. Plus I'll be replacing the fuel cell. I found brown milky stuff in fuel system. Car has been sitting "A LONG" time. Injectors were cleaned and flow matched at , this morning. Also will be tidying up some other things on the car. Stay tuned for more updates and walk around and ride along video's.

07/06/2022

Getting an old build, running for my old boss.

05/15/2022

Picked up this 1966 C10 from customer Friday. Stay tuned for the progress. Doing a LS3/4l80 swap.

11/13/2021

The main reason we came to the dyno.
2012 Cadillac CTS-V

Infinite Machine Concepts

11/12/2021

2017 SS 1LE on e85.

Hi Flo Fuel Injector Service LLC

10/07/2021

10/07/2021

Having my customer, Ian Evans 2016 F150 EcoBoost dyno tuned.

10/01/2021

Today's work made easy. By The Ford Specialist Inc., for allowing me to use the lift. To do this full exhaust swap.
2005 F150 5.4l.

07/18/2021

1995 Mustang GT came in not running so good. Customer thought it was the cam sensor. These don't have a cam sensor. After verifying the distributor pick up was bad. The pick up was so loose it was rubbing on the window wheel. Ended up replacing the whole distributor due to age and screws breaking from corrosion. Videos in comments.

05/19/2021

After many bumps in the road. I have my personal truck, 03 F150 4x4 5.4l, up and running. Huge thanks to my boss, for allowing me to bring it to the shop. To make a few of the tasks to be completed easier. Next will be doing front suspension and all the brakes.

05/07/2021

Hopefully getting my F150 some go. My boss is kind enough to let me use a lift at work, so I'm not on my back doing this. All new solenoids and trans harness. Sonnax HD valve body. And gonna finish it up with a TCI xtra cap pan.

02/25/2021

Gettin it done!

12/21/2020

2010 F150 started having phaser issues. Caught early enough, that nothing came apart and no cam damage or spit followers.
All new fomoco parts, phasers, solenoids, guides and tensioner's.
While in there put a new Melling M340HV oil pump. Higher volume and pressure. Won't have phaser issues again.

"Edit" Forgot to mention the wire with the bolt. That's how you get them back in, for the pick up tube. To the oil pump. With out having to take the oil pan off.

12/14/2020

A teaser to what it is.

12/14/2020

Little something I've been helping design.

We have something special under the lid we have been working on and finally have the data to prove our concept. Stay tuned this is going to be a game changer.

10/29/2020

Getting Infinite Machine Concepts, CTS-V tuned. Final pull.

10/25/2020

Earlier today helped a friend, Infinite Machine Concepts, get some long tubes on his 2012 CTS-V. Videos in the comments.

07/08/2020

And the fun begins! On my personal truck. LT headers.

07/07/2020

Little something I'm putting together, for a neighbor.

05/05/2020

Getting the 5.4l replacement engine ready to swap, in place of the knocking one in my truck. ProMaxx to the rescue, for extracting broken exhaust manifold studs. Thanx to my boss at my fulltime job for loaning me a tool that makes the work so much easier.
The Ford Specialist Inc.

12/31/2019

A little mocking up done today. So I can make the drain line for the turbo. And start getting the exhaust wrap done.

11/18/2019

Little 3V action today. Bent intake valve on right side. Taking head to Brandy Durham, Fastech Machine. Then replace Phaser and solenoids, when going back together.

10/20/2019

02 f150 2wd xcab part out. Motor, trans, r/axle spoken for. Hood has small dent, bumper still useable, headlight panel perfect.I mention these parts for anyone that may have a caved in front end. Msg me for anything you may need, and plz share.

10/12/2019

95 Mustang GT convertible. Both psngr windows, no beuno. Replaced psngr door window motor and regulator (no pics). Psngr quarter window took a small amount of finesse. Parts came from LMR. But were not a plug & play swap. Owner can cruise with top down now!

10/03/2019

Staying busy at a local shop, helping get things caught up. Valve cover gaskets on a 94 TB SC.

09/29/2019

Alternator went bad, on this ole Focus Zetec wagon. Customer will get it back tomorrow.

09/27/2019

Duratec intake manifold adapter plates being made today.

09/27/2019

Been making these off and on for awhile. Recently had a number of requests. So I'm making 12 and already sold 1. I'll have 11 in stock.

09/27/2019

IM adapter plates be made today. Share with your friends and group pages. Thank you!

09/22/2019

'05 Chevy Equinox - new hubs, replaced leaking oil filter housing gasket, also did an oil change.

09/18/2019

Valve cover gaskets on an 03 Jeep Liberty 3.7l done today.