Ready To Ride

05/07/2026

Made some new friends from Missouri...yup they're addicted now...

03/27/2026

Success! 2021 Can-Am X3 Smart Shocks made me feel dumb... Until I found the multiple broken wires one on the shock harness and one in the main harness. That's what happens when the heim joint breaks off and yanks all the wiring out. Good thing they were in put put mode when it happened.

03/19/2026

The week of clutches... It started off with a Can am X3 clutch rebuild and secondary rollers, RS1 full rebuild with wearables and bushings, Kawasaki Ridge tune, overdrive cover, and cruiser setup for smoother throttle and better mileage, and now the Polaris Ranger Northstar Gilomen innovations goodies to get this thing shifting smoothly again. We definitely have the experience no matter what belt drive you have.

03/05/2026

Getting this brappp brappp back to the dirt, because YZ250s need love too.

02/28/2026

We have been nominated for best of Southern Utah. https://www.bestofsouthernutah.com/vote/ # you can vote 1 time a day.  Thank you for all of your support !

Best of Southern and the Unique Logo is a trademark of Canyon Media and may only be used with express permission. © 2026 Elite Insights.

01/27/2026

Is your P drive clutch in your 22 or newer Can-Am X3 giving you fits? We can help.

12/15/2025

We took out 5 doctors and we didn't have to use any of them... We that good.

08/06/2025

Installing nitro mousses is a breeze after you have done as many as we have. If you're struggling and just want to ride hit us up.

06/14/2025

Do it right or don't do it at all.

06/08/2025

Are you familiar with the recommended brake fluid change interval of every two years, as suggested by most manufacturers? Brake fluid's hygroscopic properties allow it to absorb moisture from the air, resulting in discoloration and potential damage to master cylinders and calipers if regular replacements are neglected. It is crucial to approach this relatively simple process with caution, as brake fluid can cause skin dryness and damage to painted surfaces upon contact.