Paul's CYCLE SHOP

Paul's CYCLE SHOP 35 years experience, Affordable and RELIABLE... BY APPOINTMENT ONLY

WE DO MAINTENANCE, HIGH END PERFORMANCE, AUDIO, SUSPENSION, POWDER COATING, COMPLETE REBUILDS, CUSTOM BUILDS AND MUCH MORE.

08/08/2026

He says the great Gregg Dahl and Damon Kuskie of GMS tuned his Harley-Davidson

We are going to kick this can down the road one more time. Brake fluid on Harley’s has become a serious issue. Here is a...
08/01/2026

We are going to kick this can down the road one more time. Brake fluid on Harley’s has become a serious issue. Here is a 2022 Road Glide with 14,900 miles. Look at the contamination in the master cylinder. Brake fluid is hydroscopic and attracts water. Water is heavier than brake fluid. The water makes its way to the ABS unit and calipers. This causes soft spongy brakes, severe brake fade at high temps and possible loss of ABS function.
Change brake fluid and hydraulic clutch fluid every two years!

It seems like yesterday but it’s been over 10 years since I met Gregg and Damon at GMS. They do ALL of my shops machine ...
07/30/2026

It seems like yesterday but it’s been over 10 years since I met Gregg and Damon at GMS. They do ALL of my shops machine work and dyno tuning. I have never, not one single time had a single thing go wrong with their work! Simply, the best in the business!

Paul brings us some really fun bikes to tune. His work is always on point, and this one was no exception. He's been one of our biggest supporters over the years and we're grateful to be able to collaborate with him.

Check out the graph from this 2025 CVO Street Glide. The details are at the bottom of the page.

2025 Street Glide CVO came from the factory with a 121”. We built it into a 135” and it is making a sh*t-Ton of power. T...
07/30/2026

2025 Street Glide CVO came from the factory with a 121”. We built it into a 135” and it is making a sh*t-Ton of power. This was a super fun build!
Big thanks to Damon at GMS (Greggs Machine Shop) for the tuning and dynamometer work. These 2023 and up bikes are VERY complex to tune without replacing the ECU. This one is tuned with a Power Vision and maintains all the factory ride modes.
Video of it running in comments.

The Harley “Buzz” these days is brake fluid getting contaminated and causing ABS problems. The MoCo has taken this serio...
07/14/2026

The Harley “Buzz” these days is brake fluid getting contaminated and causing ABS problems. The MoCo has taken this seriously and put a Service Wrench light to remind you to change the brake fluid.
Trust me when I tell you that brake fluid is the most neglected fluid in cars, trucks and motorcycles.
Here we have a 2024 Road Glide with 10339 miles. Look at the contamination in the fluid!
The procedure to bleed / change the brake fluid requires a scan tool or laptop to complete the ABS function and reset the service wrench light.

It’s not a joke or a way for Harley to make money. This is a real thing!

Call me, go to the dealer or a trusted shop and get this done every two years.

Oh look, another Billy Biker Rally Special..
03/26/2026

Oh look, another Billy Biker Rally Special..

Merry Christmas everyone! I truly appreciate all of you that trust me to take care of ur cycles..It gets crazy busy in t...
12/24/2025

Merry Christmas everyone!
I truly appreciate all of you that trust me to take care of ur cycles..

It gets crazy busy in the spring so Let’s get those fluids changed, new tires or motor builds done NOW so you are ready for spring. Pick up and delivery available..

Bike nite at Lernerville Speedway stop by the Trailer and say hello.. Shirts on sale and special blow out prices on over...
07/07/2025

Bike nite at Lernerville Speedway stop by the Trailer and say hello.. Shirts on sale and special blow out prices on overstock parts..

Another HC 110” heading to the dynocologist and back to the wild.
02/22/2025

Another HC 110” heading to the dynocologist and back to the wild.

Address

Apollo, PA
15613

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+17245160092

Alerts

Be the first to know and let us send you an email when Paul's CYCLE SHOP posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Paul's CYCLE SHOP:

Shortcuts

Share