Battle Born Brakes

Battle Born Brakes Classic car parts with an emphasis on upgrades for brakes, suspension, steering and similar parts.

Here is an update on our seat brackets. We have a final design, and these are in stock, but I don't like the end result ...
06/12/2026

Here is an update on our seat brackets. We have a final design, and these are in stock, but I don't like the end result with super duty seats. With the seats as low as they can go, my head is about hitting the roof of the cab. I think these will work great with modern car seats, and we're going to make them as universal as possible for that purpose. So the goal is shifting to make these compatible with seats from most any moder car (Jetta, Camry, etc.) and also Super Duty seats.

The super duty center console does work well though. It's a little big but the width is good, and it seems to be the best option out there.

These will be for sale as soon as I get some more pictures, hopefully this weekend

In the works: all new 1973-77 Ford truck steering columns. Manual and auto. This is a challenging project and is realist...
04/14/2026

In the works: all new 1973-77 Ford truck steering columns. Manual and auto. This is a challenging project and is realistically 1-2 years out.

Does someone with a 1978/79 truck with hydroboost want to try out a pump that has two return ports? We are considering s...
03/31/2026

Does someone with a 1978/79 truck with hydroboost want to try out a pump that has two return ports? We are considering selling these and have a sample. it's the same basic design as what you already have, just with the secondary return so no tee is needed

I'm a fan of west coast mirrors, but I've always though the original mirror head was a little small, and most van and tr...
03/19/2026

I'm a fan of west coast mirrors, but I've always though the original mirror head was a little small, and most van and truck mirrors of this style are way too big. I've had this idea of making the stainless tubes and brackets to original spec, and making a slightly taller mirror that looks like it could be original. This design would have a convex mirror on the bottom 3" and a regular mirror for the top 8". With the frame, it's about 11.75" overall height not counting the studs. The parts would be polished stainless, with an appearance consistent with original. One screenshot shows an original size mirror at about 9" height for reference. Open to feedback, let me know what you think.

We're working on tall coilover buckets and a formed crossover tube. The taller height is the only practical way to do co...
03/14/2026

We're working on tall coilover buckets and a formed crossover tube. The taller height is the only practical way to do coilovers and not get 12+ inches of lift.

Here is a sneak peek of a project we are working on. Starting with our mega lift 4 link, we're extending the bracket we ...
02/19/2026

Here is a sneak peek of a project we are working on. Starting with our mega lift 4 link, we're extending the bracket we already make rearward so it's about 3' long, and then incorporating a crossmember to make a triangulated 4 link system. this will allow for rear coilovers. Pictured is scan data of a highboy frame. We'll start with 133" wheelbase highboys and lowboys, and other applications will be special order only. This will pair well with our taller front coilover buckets. We're doing our best to make this work with minimal lift. it will work with more lift easy enough, less lift is actually trickier. Brackets will be 1/4" steel, tubes will be 2" OD.

We now have reproduction AC evaporator rubber seals for 73-79 Ford trucks. Note there are two types- evaporators with tw...
02/17/2026

We now have reproduction AC evaporator rubber seals for 73-79 Ford trucks. Note there are two types- evaporators with two 1/2" lines, and evaporators with a 1/2" and a 3/4" line. These are on ebay only for now under part numbers EVS1, EVS1, EVS2, and EVS4. $15 each delivered.

I'm looking for feedback on this fender flare design for 73-79 Ford trucks. I'm going for something a little modern but ...
02/15/2026

I'm looking for feedback on this fender flare design for 73-79 Ford trucks. I'm going for something a little modern but still tasteful. This is a 3d printed prototype- it does not have a nice finish like a production set of parts would. I think these could be made fairly affordably, perhaps $200 per pair. These do not require any cutting.

We'll be making Cummins swap radiator hoses, intercooler hoses, and air filter intake hoses. These will be high quality ...
01/27/2026

We'll be making Cummins swap radiator hoses, intercooler hoses, and air filter intake hoses. These will be high quality silicone. The manufacturer we are working with can make them in colors. Pictures of unrelated colored hoses are included for reference. If you are considering buying these sort of parts from us, are bright colors tempting? or would you order just plain black?

Address

Amboy, WA
98601

Website

Alerts

Be the first to know and let us send you an email when Battle Born Brakes posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category