Fast Old Cars

11/17/2025

11/16/2025

1966 Dodge Coronet

11/01/2025

I just picked up something straight out of the 1980s

10/20/2025

https://www.instagram.com/reel/DMu1C2Etnus/?igsh=MW14Z2hzZ3Nmc3RqYQ==

10/20/2025

A nice day for a drive in a,1968 442

09/08/2025

1966 Dodge Coronet project. 360. LA engine, a904 automatic, 3.23 gears, disc brakes up front drums in the back. I completely remade the wiring harness, made new brake lines, installed new fuel tank, replaced the suspension bushings, raised the rear a little, upholstered the seats, door panels, and dash. I disassembled, cleaned, inspected, replaced the teaser axles, ace resealed the rear axle assembly. I made and installed the vinyl top. I replaced the rear window seal and removed the old dash and ac system.

07/03/2025

This is the wiring harness I built for my 68 Cutlass convertible. I used just rools/spools of wire and a box and bags of terminals.
The only terminals I reused were the fuse holders ac the twin lock terminals that connect the main harness to the intermediate harness. I did have to use some of the housings.
I used 14, 12, and 10 gauge wire rolls and cloth harness tape. All butt connections are soldered and heat shrunk.
This is the forward lamp, engine, dash, auxiliary lighting, a/c, console, power top, intermediate, and tail light harneses, the reverse light and under hood light have new wires with the bulb contact connectors.
I tell customer's to buy the harness kits because it is more cost effective for them. American Autowire Highway 15 is the best for a hot rod/ muscle car.

06/17/2025

1970 Challenger progress.

06/11/2025

I fixed some of my pattern issues. I didn't have any of the old material to use a a reference. It does nicely. I also solved my seat back. That's the color carpet in the wagon. So when all the seats are folded, it would look more natural.

06/09/2025

I bought this bare seat frame for the 66 Vist Cruiser. I replaced the broken springs and made a template. I'm going to take it back apart for adjustments.