Restoration Cycles NC

Restoration Cycles NC Motorcycle Scooter and Moped repairs for vintage and new bikes. I customize, rebuild and restore!

Suzuki Rmz250 4 stroke complete engine rebuild. This all started with a broke valve then once it was running again it ra...
04/12/2026

Suzuki Rmz250 4 stroke complete engine rebuild. This all started with a broke valve then once it was running again it ran too hot shut it down went through it again to make sure everything I had done with the top end was spot on. It was. So I drained the coolant and oil again. Loads more metal in the oil. Pulled the engine back out crankshaft and bearings bad, oil pump bad, previous person replaced crank shaft and damaged engine case.

Needless to say now we have another engine case a new full set of all the bearings and seals and a new to this bike working oil pump. All I can say is wow! So much damage due to someone trying to make a quick buck. I spend weeks building an engine the previous person turned it around in a couple weeks.

Still waiting on new timing chain and guides to go into it. Here’s some pics!

03/05/2026

Going to be ready to work on more Kei trucks and vans. Got one you need serviced or upgraded?? Let me know.

So I adventured into working on something a bit different. A Japanese Kei Van a 98 Suzuki Every that belongs to a good c...
03/04/2026

So I adventured into working on something a bit different. A Japanese Kei Van a 98 Suzuki Every that belongs to a good customer and friend of mine. It’s been an interesting experience. I have installed a Harley CV40 carburetor, changed all the fluids, replaced all the tune up parts, added a radio that works here in the US. Added speakers and a small underseat subwoofer. Fixed wiring and lights. Added sound deadening material inside the panels. And several other bits and pieces along the way. It’s a neat little van! Here are a few pics!

Got a couple things for sale if anyone is interested. 2019 Honda PCX 150 super nice title in my name new tires all servi...
02/23/2026

Got a couple things for sale if anyone is interested. 2019 Honda PCX 150 super nice title in my name new tires all services completed. Ready to go.

And this Walk Machine scooter Made in Brazil new tires and tubes new fuel lines all ready to go stand on scooter great for around the neighborhood.

Honda PCX 150 2400. And the walk machine 450.

A little fixing up on this 78 Honda Z50 it had been parked for awhile had trouble fouling plugs and needed to be cleaned...
02/17/2026

A little fixing up on this 78 Honda Z50 it had been parked for awhile had trouble fouling plugs and needed to be cleaned up a bit. But now she’s back running again!

Check out this crazy stand on scooter it was purchased in Brazil by its original owner then he brought it here when he m...
02/12/2026

Check out this crazy stand on scooter it was purchased in Brazil by its original owner then he brought it here when he moved. Now I have it! It’s called a Walk Machine. Powered by a 42cc 2 stroke engine belt driven and really fun! Still has the original tires on it although I will be replacing them soon. If you happen to have ever seen another in the US for sale let me know. I am still researching it!

02/06/2026

Don’t let just anyone rebuild your engine. I have a bike in the shop it’s been a nightmare that doesn’t end. Took the top end off after it had been rebuilt only lasted 30 mins per the owner before a valve broke. I rebuilt the top end completely had to get a new cylinder head etc. got it back together very hard to start. Got it started had it running noticed the large amount of metal in the oil after only running 15 mins. Drain the oil, added fresh oil bike still hard to start. Tore it back down found nothing wrong with my work. So started into the engine case, flywheel key intact, timing chain dead on valves correctly shimmed, removed clutch cover oh the nut holding the driven gear had backed off chewing into the cover. Transmission main shaft has 1/4 inch of side to side play, pulled clutch to find engine case broken!

A cautionary and real story I am still working on!

2004 Suzuki RM-Z250 4 stroke.

02/04/2026

Ok I pose this question to all my followers! What should I build next? Think definitely Honda and vintage!

struck here pretty quick! Hopefully it won’t hang out long!
01/26/2026

struck here pretty quick! Hopefully it won’t hang out long!

Another one done! Easy repair on this one. Carburetor float needle had gotten stuck from sitting a few months. ...
01/20/2026

Another one done! Easy repair on this one. Carburetor float needle had gotten stuck from sitting a few months.

Ride Red! Can’t keep a good old Honda down! Just brought the little xr80r back to life been parked for quite some time a...
01/16/2026

Ride Red! Can’t keep a good old Honda down! Just brought the little xr80r back to life been parked for quite some time and fixed a corroded wiring connection and the rear brakes on the 300ex quad.

Address

32086 Canton Road
Albemarle, NC
28001

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 2pm

Telephone

+18323814227

Website

Alerts

Be the first to know and let us send you an email when Restoration Cycles NC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Restoration Cycles NC:

Shortcuts

Share

Category