Brogam automotive design studio

Brogam automotive design studio Welcome to our design studio page,
we produce high-quality tuning of our design. We strive to make cars more noticeable among others and give an updated look.

Mercedes w221 with our body kit✅
12/05/2026

Mercedes w221 with our body kit✅

W220 is unnoticeably becoming a classic, but technologically this car is still not inferior to modern cars🤌
09/05/2026

W220 is unnoticeably becoming a classic, but technologically this car is still not inferior to modern cars🤌

Ferrari Portofino carbon body elements are made in our company ✅
06/05/2026

Ferrari Portofino carbon body elements are made in our company ✅

Harley Davidson FatBob carbon fiber✅ I think there is no point in talking about saving weight in the comparison of metal...
05/05/2026

Harley Davidson FatBob carbon fiber✅ I think there is no point in talking about saving weight in the comparison of metal and carbon parts, it’s all for aesthetics, it turned out excellent

⚡Door Sill Plates for the Porsche 911 Carrera S (992) Dry Carbon⚡ ✈Internetional ShippingMounting: double-sided tapeIt i...
06/04/2026

⚡Door Sill Plates for the Porsche 911 Carrera S (992) Dry Carbon⚡
✈Internetional Shipping

Mounting: double-sided tape

It is coated with UV-protected automotive varnish, so it does not deform like cheaper analogs.

⏳Manufacturing: takes about 1-1,5 weeks (if not in stock at the time of purchase).
✈️Shipping takes about 1,5-2,5 weeks for USA and EU and 2-3 weeks for other countries.
💸Payment methods: Bank transfer, PayPal, USDT cryptocurrency and others by agreement, Marketplace:
https://lavky.com/eYxOWqp

The product is made of carbon fiber and resin using the vacuum infusion method (a technology commonly used in the manufacturing of aerospace components, racing cars, etc).
The manufacturing process consists of the following stages:
1. European-made carbon fiber fabric is carefully laid into a clean mold, ensuring a precise and aesthetically aligned pattern.
2. It is infused under vacuum with high-quality epoxy resin. No polyester gel coats or resins are used!
3. Thermal treatment involves curing at temperatures of up to 100°C (212°F).
4. Trimming and sanding are performed for a perfect finish.
5. A two-step coating process is applied using UV-protected automotive-grade varnish.
6. The product is securely packaged for safe postal shipping.

Carbon fiber weave type: Twill.

The thickness of the product is approximately 1 mm.

It doesn't develop white spots.
It can withstand minor impacts from stones.

You can always email me and consult me with any questions.

#911992



⚡Diffuser for Audi RS Q8 FaceLift and Pre-FaceLift version, CarbonFiber or FiberGlass⚡✈Internetional ShippingIt is coate...
04/04/2026

⚡Diffuser for Audi RS Q8 FaceLift and Pre-FaceLift version, CarbonFiber or FiberGlass⚡

✈Internetional Shipping

It is coated with UV-protected automotive varnish, so it does not deform like cheaper analogs.

You can choose the finish: glossy or matte. Please indicate your preference in the order comments.

⏳Manufacturing: takes about 1,5-2 weeks (if not in stock at the time of purchase).

✈️Shipping takes about 1,5-2,5 weeks for USA and EU and 2-3 weeks for other countries.

💸Payment methods: Bank transfer, PayPal, USDT cryptocurrency and others by agreement, Marketplace:
https://lavky.com/V8N69Uj

The product is made of carbon fiber and resin using the vacuum infusion method (a technology commonly used in the manufacturing of aerospace components, racing cars, etc).

The manufacturing process consists of the following stages:

1. European-made carbon fiber fabric is carefully laid into a clean mold, ensuring a precise and aesthetically aligned pattern.

2. It is infused under vacuum with high-quality epoxy resin. No polyester gel coats or resins are used!

3. Thermal treatment involves curing at temperatures of up to 100°C (212°F).

4. Trimming and sanding are performed for a perfect finish.

5. A two-step coating process is applied using UV-protected automotive-grade varnish.

6. The product is securely packaged for safe postal shipping.

Carbon fiber weave type: Twill.

The thickness of the product is approximately 1 mm.

It doesn't develop white spots.

It can withstand minor impacts from stones.

You can always email me and consult me with any questions.















⚡Front Fender for Hyundai Genesis Coupe Carbon 2010-2016 Pair🤕 Carbon Fiber or FiberGlass⚡Bolt-on installation to OEM mo...
01/04/2026

⚡Front Fender for Hyundai Genesis Coupe Carbon 2010-2016 Pair🤕 Carbon Fiber or FiberGlass⚡

Bolt-on installation to OEM mounting points.

International shipping to most countries worldwide!

It is coated with UV-protected automotive varnish, so it does not deform like cheaper analogs.

You can choose the finish: glossy or matte. Please indicate your preference in the order comments.

⏳Manufacturing: takes about 1,5-2 weeks (if not in stock at the time of purchase).

✈️Shipping takes about 1,5-2,5 weeks for USA and EU and 2-3 weeks for other countries.

💸Payment methods: Bank transfer, PayPal, USDT cryptocurrency and others by agreement, Marketplace:
https://lavky.com/s1X3IB3

The product is made of carbon fiber and resin using the vacuum infusion method (a technology commonly used in the manufacturing of aerospace components, racing cars, etc).

The manufacturing process consists of the following stages:

1. European-made carbon fiber fabric is carefully laid into a clean mold, ensuring a precise and aesthetically aligned pattern.

2. It is infused under vacuum with high-quality epoxy resin. No polyester gel coats or resins are used!

3. Thermal treatment involves curing at temperatures of up to 100°C (212°F).

4. Trimming and sanding are performed for a perfect finish.

5. A two-step coating process is applied using UV-protected automotive-grade varnish.

6. The product is securely packaged for safe postal shipping.

Carbon fiber weave type: Twill.

The thickness of the product is approximately 1 mm.

It doesn't develop white spots.

It can withstand minor impacts from stones.

You can always email me and consult me with any questions.















⚡Side Skirts for Audi RS Q8 2020-2024 "Under-door" Carbon Fiber or FiberGlass⚡Sold separately for each side or pair.Thre...
01/04/2026

⚡Side Skirts for Audi RS Q8 2020-2024 "Under-door" Carbon Fiber or FiberGlass⚡

Sold separately for each side or pair.
Three-piece side skirts on each side, meaning each side skirt consists of three sections.

Mounting: Sealant.

It is coated with UV-protected automotive varnish, so it does not deform like cheaper analogs.

You can choose the finish: glossy or matte. Please indicate your preference in the order comments.

⏳Manufacturing: takes about 1,5-2 weeks (if not in stock at the time of purchase).

✈️Shipping takes about 1,5-2,5 weeks for USA and EU and 2-3 weeks for other countries.

💸Payment methods: Bank transfer, PayPal, USDT cryptocurrency and others by agreement, Marketplace:
https://lavky.com/l87lCg

The product is made of carbon fiber and resin using the vacuum infusion method (a technology commonly used in the manufacturing of aerospace components, racing cars, etc).

The manufacturing process consists of the following stages:

1. European-made carbon fiber fabric is carefully laid into a clean mold, ensuring a precise and aesthetically aligned pattern.

2. It is infused under vacuum with high-quality epoxy resin. No polyester gel coats or resins are used!

3. Thermal treatment involves curing at temperatures of up to 100°C (212°F).

4. Trimming and sanding are performed for a perfect finish.

5. A two-step coating process is applied using UV-protected automotive-grade varnish.

6. The product is securely packaged for safe postal shipping.

Carbon fiber weave type: Twill.

The thickness of the product is approximately 1 mm.

It doesn't develop white spots.

It can withstand minor impacts from stones.

You can always email me and consult me with any questions.















⚡Pair Upper Bumper Trims (Boomerangs) for Audi RS Q8 2020-2024 CarbonFiber or FiberGlass⚡✈International ShippingMounting...
31/03/2026

⚡Pair Upper Bumper Trims (Boomerangs) for Audi RS Q8 2020-2024 CarbonFiber or FiberGlass⚡

✈International Shipping

Mounting: Sealant.

It is coated with UV-protected automotive varnish, so it does not deform like cheaper analogs.
You can choose the finish: glossy or matte. Please indicate your preference in the order comments.

⏳Manufacturing: takes about 1,5-2 weeks (if not in stock at the time of purchase).
✈️Shipping takes about 1,5-2,5 weeks for USA and EU and 2-3 weeks for other countries.
💸Payment methods: Bank transfer, PayPal, USDT cryptocurrency and others by agreement, Marketplace:
https://lavky.com/s7mnwL1

The product is made of carbon fiber and resin using the vacuum infusion method (a technology commonly used in the manufacturing of aerospace components, racing cars, etc).
The manufacturing process consists of the following stages:
1. European-made carbon fiber fabric is carefully laid into a clean mold, ensuring a precise and aesthetically aligned pattern.
2. It is infused under vacuum with high-quality epoxy resin. No polyester gel coats or resins are used!
3. Thermal treatment involves curing at temperatures of up to 100°C (212°F).
4. Trimming and sanding are performed for a perfect finish.
5. A two-step coating process is applied using UV-protected automotive-grade varnish.
6. The product is securely packaged for safe postal shipping.

Carbon fiber weave type: Twill.

The thickness of the product is approximately 1 mm.

It doesn't develop white spots.
It can withstand minor impacts from stones.
You can always email me and consult me with any questions.

, , , , , , , , , , , , , , , , , , , , , , , ,

⚡Pair Rear Window Trim Pieces for Audi RS Q8 2020-2025 CarbonFiber or FiberGlass⚡✈International ShippingMounting: Sealan...
31/03/2026

⚡Pair Rear Window Trim Pieces for Audi RS Q8 2020-2025 CarbonFiber or FiberGlass⚡

✈International Shipping

Mounting: Sealant.

It is coated with UV-protected automotive varnish, so it does not deform like cheaper analogs.
You can choose the finish: glossy or matte. Please indicate your preference in the order comments.

⏳Manufacturing: takes about 1,5-2 weeks (if not in stock at the time of purchase).
✈️Shipping takes about 1,5-2,5 weeks for USA and EU and 2-3 weeks for other countries.
💸Payment methods: Bank transfer, PayPal, USDT cryptocurrency and others by agreement, Marketplace:
https://lavky.com/P9vqi4a

The product is made of carbon fiber and resin using the vacuum infusion method (a technology commonly used in the manufacturing of aerospace components, racing cars, etc).

The manufacturing process consists of the following stages:

1. European-made carbon fiber fabric is carefully laid into a clean mold, ensuring a precise and aesthetically aligned pattern.
2. It is infused under vacuum with high-quality epoxy resin. No polyester gel coats or resins are used!
3. Thermal treatment involves curing at temperatures of up to 100°C (212°F).
4. Trimming and sanding are performed for a perfect finish.
5. A two-step coating process is applied using UV-protected automotive-grade varnish.
6. The product is securely packaged for safe postal shipping.

Carbon fiber weave type: Twill.

The thickness of the product is approximately 1 mm.

It doesn't develop white spots.
It can withstand minor impacts from stones.

You can always email me and consult me with any questions.

, , , , , , , , , , , , , , , , , , , , , , , ,

Address

Межреченский переулок, 1
Chernivtsi
58020

Opening Hours

Monday 09:00 - 20:00
Tuesday 09:00 - 20:00
Wednesday 09:00 - 20:00
Thursday 09:00 - 20:00
Friday 09:00 - 17:00

Telephone

+380635358864

Website

Alerts

Be the first to know and let us send you an email when Brogam automotive design studio posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Brogam automotive design studio:

Shortcuts

Share

Category