https://www.facebook.com/107853201813253/

V Spec Auto

Call Directions

30/10/2026

1JZ GE ETCSI VVTI complete engine and transmission with harness and stock ECU for sale. Asking 17k negotiable. Call 383 5875 for more info or to have a personal look if interested.

23/10/2026

BMW E46 converted to Nissan RB25 NEO DE engine and manual gearbox utilizing the stock Nissan ECU.
Here’s another seamless e46 conversion.
ALL OEM functions retained including :
✅ RPM functionality
✅ Check engine light
✅ Low charge warning indicator
✅ Engine coolant temperature
✅ OEM AC controls along with every feature the bmw was manufactured with!

28/08/2026

From the shop straight to the dyno and from the dyno straight on the the boat to Tobago for greatrace.

21/08/2026

AEM Infinity 506 harness built, installed and tuned! Final result of our last installation of an AEM Performance Electronics Infinity 506 EMS on this Nissan C33 Laurel fitted with an RB25 DET. This install included *GTR35 Coils, *Injector Dynamics 1050cc injectors, *Bosch DBW Electronic Throttle together with a Nissan HR15 APP, complete concentric twisted milspec harness with bulkhead connector and much more! This engine bay was completely stripped of all OEM wiring and rewired using better materials for better longevity and reliability. Possibly the cleanest C33 you may see today!

15/08/2026

PNP jumper harness done for Suzuki Jimny using a G13BB engine and now controlled by a Haltech Elite 550 ECU. After carefully concentric twisting each wire to allow flex without breakage or shorts and also creating service loops on each connector entry to prevent breakage or shorts on future repinning this harness is now ready to be plugged and played in this Suzuki Jimny

04/08/2026

Completed concentric twisted milspec harness for a Nissan RB25 DET NEO using an AEM Performance Electronics series 2 infinity 506 ECM.

03/07/2026

Finishing touches being done to our latest project. This features a Honda EG Hatch fitted with a turbo B series engine and MME sequential air paddle shifted gearbox all controlled by a Haltech R3 VCU and IC7 dash display. Stay tuned for dyno results.

28/06/2026

After carefully and precisely concentric twisting each wire to complete each harness, before installation, we bench test all our built harnesses. This ensures precision, accuracy, confirmation and quality. Here we are using a Haltech Elite 750 to support a Nissan SR20 engine and Manual Transmission.Detailed oscilloscope trigger patterns are then generated to the ECU via our simulator. After the ECU recognizes and analyzes confirmed trigger and home patterns it should now output ignition and injector signals confirming electrical and electronic stability in our harness. After confirming these ignition spark and injector pulse events occur we now have the confidence to install this harness with guaranteed precise functionality when installed on engine.

27/06/2026

Sr20 Harness completed for the Haltech 750 Elite ECU. After carefully concentric twisting the harness goes onto the bench tester to ensure accuracy and precision before installation on engine as you can see being done at the end of this video.

27/06/2026

EZ30 NA engine and manual gearbox supported by Haltech Elite 750 ECU. This installation was done at the convenience of the customer at their location which happened to be in Tobago!

Address

Tumpuna Road
Arima
30

Telephone

+18683835875

Website

facebook.com

Alerts

Be the first to know and let us send you an email when V Spec Auto posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.