08/07/2022
BASIC TYPE AMBULANCE
The new ambulance design of EOS ambulance, a basic type of ambulance, was presented to our valued customers.
Our basic type ambulance is designed and produced for our customers looking for affordable prices.
Our interior design, which is preferred in regions such as Africa and the Middle East, is preferred by users with its high quality and abundant storage space.
Basic type ambulance design offers complete storage space on the left side of the ambulance. The cabinet system on the left side provides a great advantage for users. In addition, there is a storage area for extra stretchers under the bench where 3 personnel can sit.
You can find the content information of our basic type ambulance briefly below.
There is a long Light Bar at the front of the ambulance roof and a cylindrical light bar at the back of the ceiling.
There are side warning lamps on the upper side of the ambulance, 3 on the right and 3 on the left.
The lightbar and the siren system can be controlled from the driver’s seat.
The ambulance floor is covered with an antibacterial, non-slip and easy-to-clean material.
Under the coverings of the right and left walls of the patient cabinet, there are support plates for fixing the cabinet and medical equipment. There is also sound and heat insulation.
There is a complete cabinet system made of MDF material on the left side of the vehicle.
On the right side of the vehicle, there is a bench made of MDF material with a capacity of 3 personnel. In addition, the bottom of the bench is used as a storage area for dustpan, stretcher and other materials.
At the front of the cabin, there is equipment storage with drawers, a command panel cabinet, and a doctor seat.
In the patient cabinet, there is a handle and an I.V Holder along with the cabinet for the personnel.
There are 4 long lamps and 2 spot lamps for patient cabinet lighting.
The ambulance electrical system complies with European standards. There is an additional battery, manual control panel, inverter and rectifier.
There is an internal communication system for communication between the patient cabin and the driver’s area.
Customer-specified reflective inscriptions, stripes, and logos
Extension cable with external 220V electrical input