15/04/2026
6 STEPS PROCESS 😎🤙
1. Prepare the surface
Clean the area thoroughly. Make sure it’s dry, dust-free.
2. Position the sticker
Align the sticker along the vehicle’s body line.
Fix it in place using tape or a magnets.
3. Apply the sticker
Peel off the backing paper.
Slowly follow the body line while applying.
Use a heat gun on low temperature to help the sticker conform.
4. Adjust if needed
If you miss the line, don’t worry—gently peel it off and reposition.
5. Remove transfer film
Once applied, carefully peel off the transfer foil.
6. Final heating
Lightly heat the applied sticker from a safe distance.
Do NOT overheat—you don’t want to burn or damage the material.
Need help?
If you have any questions, don’t hesitate to contact us.
[email protected]
