Xinzhong Autoparts LLP

Call Directions Website

Xinzhong Autoparts LLP The Leading Retailer, exporter and importer for Volkswagen, Audi, Skoda, Seat, Volvo, Porsche and Bentley.

BOSCH Synthetic X7 5W-40 — NOW AVAILABLE! 🔧Give your engine the protection it deserves. 💪Introducing BOSCH Synthetic X7 ...
30/09/2026

BOSCH Synthetic X7 5W-40 — NOW AVAILABLE! 🔧

Give your engine the protection it deserves. 💪

Introducing BOSCH Synthetic X7 5W-40 Fully Synthetic Engine Oil, now available!

✅ Excellent engine protection
✅ Helps improve fuel efficiency
✅ High heat & sludge resistance
✅ Ideal for everyday driving and hot climates
✅ Trusted BOSCH quality

Keep your engine running smoothly and protected, whether it’s daily commuting, long-distance driving, or stop-and-go traffic. 🔥

📦 BOSCH Synthetic X7 5W-40 | 4L

📩 PM us for price & vehicle compatibility!

A Milestone Built on Trust — Over 20 Years with BILSTEINWe are proud to share another year of important milestone for Xi...
20/08/2026

A Milestone Built on Trust — Over 20 Years with BILSTEIN

We are proud to share another year of important milestone for XinZhong Autoparts LLP — celebrating over 20 years of partnership with BILSTEIN.

Receiving this certificate is more than just a recognition. It represents more than two decades of trust, commitment, professionalism, and a strong partnership built together within the automotive aftermarket industry.

Over the years, we are grateful to BILSTEIN for the continued trust and support, and to our customers and team members who have been an important part of this journey.

🤝 Over 20 years of partnership
⚙️ Quality automotive parts
🚗 Reliable service and support
📈 Growing stronger together

We look forward to continuing this long-standing partnership and building an even stronger future together with BILSTEIN.

XinZhong Autoparts LLP — Moving Forward Together.

Understanding headlamp condensationAfter a new headlamp or bulb has been installed, it is normal for small water droplet...
04/08/2026

Understanding headlamp condensation

After a new headlamp or bulb has been installed, it is normal for small water droplets to appear on the inside of the headlamp lens, particularly after a car wash or during periods of rainy or humid weather. This condition is often mistaken for a defective headlamp.

These fine water droplets do not enter from outside the headlamp. Instead, they are caused by condensation, where the moisture naturally present inside the headlamp condenses on the cooler inner surface of the lens due to changes in temperature.

This is a normal characteristic of headlamp ventilation and does not indicate a product defect. The condensation will gradually dissipate as the headlamps generate heat during normal driving. In some cases, it may take up to one week for the condensation to clear completely, depending on the surrounding weather conditions.

If you received a new starter motor that has different no. of teeth. First is to ensure replacement starter is correctly...
13/05/2026

If you received a new starter motor that has different no. of teeth. First is to ensure replacement starter is correctly specified for your vehicle.

The decisive factor here is not the actual number of teeth, but the shift of the distance between the starter pinion and the ring gear on the vehicle. Depending on the starter pinion, the pinion shaft shifts higher or lower in relation to the starter ring gear.

The difference only becomes visible by looking at the bearing bell.

So if the objective is to replace a starter with 11 teeth with one featuring 12, the pinion shaft is moved further away from the ring gear. The point of contact of both pinions, starter and ring gear remains identical despite the different number of teeth.

This means that if a starter with a different number of teeth is supplied as a replacement , it can be installed without any issues – provided the vehicle has been correctly assigned.

*Is 0W-20 detroying engines?*Short answer is "No". - 0W-20 is safe when it’s the manufacturer’s recommended oil. It exte...
08/04/2026

*Is 0W-20 detroying engines?*
Short answer is "No".
- 0W-20 is safe when it’s the manufacturer’s recommended oil. It extends engine life by 45%, reduces wear by 60%, improves fuel economy by 6-8%.
- Problems usually come from using the wrong oil, heavy driving conditions, oil consumption issues, or poor maintenance.
- Only consider thicker oil if your engine allows it or under extreme/high-mileage conditions.
👉 Bottom line: Use what your manual recommends and maintain your car properly.

*Is 0W-20 good for hot weather?*
Yes—0W-20 is generally fine in hot weather if your engine is designed for it.
- The “20” rating means it still provides proper protection at operating temperature.
- All major car manufacturers test it in their engines in extreme heat.
- Issues only arise with heavy stress (towing, racing), high heat engines, or worn engines.
👉 Bottom line: Hot climate alone is not a problem for 0W-20.

*What happens if i don't use VW 502-00 oil?*
- VW 502.00 is required for proper protection in many Volkswagen petrol engines.
- Not using it won’t cause instant failure, but can lead to issues over time.
- Risks include more engine wear, sludge buildup, and possible turbo damage.
- Better-quality oils close to spec may be okay short-term, but cheap or wrong oils increase risk.
- It can also void your warranty if applicable.
👉 Bottom line: You can get away with it briefly, but long-term it’s safer to use VW 502.00-approved oil.

🚗 Morning Jerks When Driving? Your Transmission Might Just Be “Waking Up”🔧 The Technical Reasons- Electronics & Humidity...
16/03/2026

🚗 Morning Jerks When Driving? Your Transmission Might Just Be “Waking Up”
🔧 The Technical Reasons
- Electronics & Humidity: In Singapore’s climate, condensation can form inside the transmission’s Mechatronics unit, disrupting sensor signals.
- Cold Fluid: Transmission fluid is thicker when cold, slowing hydraulic response and clutch engagement.
🌡️ Why Warming Up Matters
- Fluid viscosity: Cold fluid delays smooth engagement.
- Clutch packs & seals: These expand slightly as they warm, improving smoothness and reducing slip.
- Adaptive logic: Modern gearboxes adjust shift patterns once sensors detect optimal
- fluid temperature.
✅ Best Practice Before Driving Off
- Start the engine and let it idle for 30–60 seconds to circulate oil through the gearbox.
- Drive gently for the first few kilometers — light load warms the transmission faster than idling.
- Avoid hard acceleration or manual shift modes until the gearbox reaches operating temperature.
(Some manufacturers even program transmissions to hold lower gears longer when cold to help warm the fluid.)
🇸🇬 Why Singapore Makes It Worse
Short trips and stop‑start traffic mean the transmission rarely reaches ideal temperature. This accelerates sludge buildup and seal hardening.
🛡️ Prevention
- Check transmission fluid every 60,000 km.
- Always use the specified fluid

Please be informed that our office will be closed for Chinese new year holidays from 15th February 2026(Sunday) to 22nd ...
11/02/2026

Please be informed that our office will be closed for Chinese new year holidays from 15th February 2026(Sunday) to 22nd February 2026 (Sunday) and will resume business on 23rd February 2026 (Monday).

We would like to take this opportunity to wish everyone a Happy and Prosperous New Year!

Say Goodbye to Porsche PDK Sensor Failures!For your Information:Owners with models 997, 991, Cayman, and Boxster (981) h...
29/10/2025

Say Goodbye to Porsche PDK Sensor Failures!

For your Information:
Owners with models 997, 991, Cayman, and Boxster (981) have had some pretty scary situations where they have had a gearbox fault that sends the car into limp home mode, or renders it completely undrivable. This can be due to a faulty distance sensor or displacement sensor within the PDK transmission itself. The message you will have seen on your Porsche will read, “Transm. fault. Poss. no R gear. Drive on poss.”

We proudly offers an advanced solution to the dreaded PDK distance sensor failure affecting Porsche 911, Cayman, and Boxster models (997, 991, 981, 718). If your car shows gearbox fault messages or codes P1731–P1735, there’s no need for an expensive transmission replacement. Our 100% new T-Design distance sensor—built with modern 2021 electronics—replaces outdated factory parts (0501325775, 0501327105, 0501324703). This repair restores full gearbox function, eliminates limp mode, and ensures reliable shifting performance.

22/07/2025

0B5 7-SPEED WET DUAL-CLUTCH TRANSMISSION is the most common gearbox in Audi cars, but also the one with the highest failure rate. It is mainly using in Audi A4, A5, A6, A7, S5, S7 and Q5.Basically, when an Audi vehicle equipped with 0B5 gearbox has traveled about 100k kilometers, the following 2 common faults will occur:1) The instrument panel indicates a gearbox malfunction and the vehicle suddenly loses odd or even number of gears while driving. This is generally caused by corrosion on the surface of the gearbox circuit board wiring plug resulting in poor circuit contact;2) The transmission enters the automatic lock mode which makes the car unable to accelerate and increases fuel consumption. this is usually caused by wear of the solenoid valve, causing the change in controlling oil pressure of the valve body.If your car encounters the above problems, it can be easily solved by replacing a set of VIKA transmission circuit board and solenoid valve.VIKA gearbox circuit board was replaced with an improved cable, and the plug as upgraded to phosphor bronze, which effectively avoided chemical reaction with the transmission oil and caused corrosion, and completely solved the cable malfunction.VIKA transmission solenoid valve is produced by a factory with OEM qualifications. The product quality is consistent with OE and the performance is more stable.VIKA transmission circuit board and solenoid valve set - Complete set replacement provides you with a one-stop solution to gearbox malfunction and saves maintenance costs.

Discover superior engine performance with FEBI Engine Oil and Automatic Transmission Oil, proudly made in Germany. Engin...
09/07/2025

Discover superior engine performance with FEBI Engine Oil and Automatic Transmission Oil, proudly made in Germany. Engineered to meet the highest standards, FEBI oils ensure optimal lubrication, wear protection, and temperature stability in all driving conditions. Whether you’re maintaining your car’s engine or transmission, FEBI’s advanced formulations help extend component life and improve efficiency. Trusted by professionals worldwide, FEBI products deliver German precision and quality you can rely on. Choose FEBI for smoother gear shifts, reduced friction, and enhanced engine performance. Keep your vehicle running like new—experience the power of premium German technology with FEBI lubricants today.

Address

33 Tyrwhitt Road
Singapore
207535

Opening Hours

Monday 09:00 - 18:00
Tuesday 09:00 - 18:00
Wednesday 09:00 - 18:00
Thursday 09:00 - 18:00
Friday 09:00 - 18:00
Saturday 09:00 - 16:00

Telephone

+6531572377

Website

Alerts

Be the first to know and let us send you an email when Xinzhong Autoparts LLP posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Sponsored

Share

Category