Dynotech

Dynotech Dynotech Race Engineering - Vi tillverkar och säljer högkvalitetsprodukter inom motorsport! Vill du ha din bil mappad?

Vi på Dynotech har specialiserat oss på väl utvalda prestandahöjande produkter till såväl bruksbilar som rena tävlingsbilar, se mer i vår Webshop. Vi har den senaste chassie dyno utrustningen Dynapack 5000 2wd, Sveriges kraftigaste navdyno - den kan mäta upp till 1600Hk på hjulen beroende på utväxling vilket är mest på marknaden. Problemen med hjulspin, däckslitage, ogynsamt komprimerad fjädring o

ch bakvagnsgeometri finns inte i en chassidyno då den bultas direkt på naven. Vi utför även flockning, svetsarbeten, metalbearbetning, specialbyggnationer, däckserivce, fordonservice till rena custom motorbyggen.

A set of custom Lamborghini centerbolts adapters for Porsche cup wheels we have made in crmo steel.
17/06/2021

A set of custom Lamborghini centerbolts adapters for Porsche cup wheels we have made in crmo steel.

What about F1 clutch 4 plate carbon discs at 97mm with titanium housing. Weight 860grams and torque capacity of 1100nm.B...
13/06/2021

What about F1 clutch 4 plate carbon discs at 97mm with titanium housing. Weight 860grams and torque capacity of 1100nm.

Beeing abel to offer parts from drop in replacement upgrades to stock clutches up to parts gives us a wide flexible range to mfg a optimal flywheel and clutchkit just for the type of racing you are doing. 💯

ZF Motorsport 3 plate carbon carbon clutch. Discs and floaters both in carbon and have therefor a huge heat capacity and...
13/06/2021

ZF Motorsport 3 plate carbon carbon clutch. Discs and floaters both in carbon and have therefor a huge heat capacity and no warping. Torque rating 1500nm. Can wear over 6mm before parts need to be replaced. 5 times more than other 184mm. This is the next step up from our already leading clutch in the drifting scene, rcs 200mm sinter. I can bet there is no other clutch out there beeing abel to take more abuse than this clutch. Premium Quality is a way better investment in the long run.

11/06/2021

Sneak peek of upcoming new product 😍

Made some parts to mount Porsche cup centerlock wheels on a Lamborghini Gallardo with audi R8 suspension. ...
10/06/2021

Made some parts to mount Porsche cup centerlock wheels on a Lamborghini Gallardo with audi R8 suspension.

29/05/2021

Sending put some of our products to USA and Canada. :)

Our billet aluminum steering column with updated end design.
28/05/2021

Our billet aluminum steering column with updated end design.

Our BMW M30 Reinforced damperhubs made in hardened high strength steel with very close tolerance. These are made to be s...
07/05/2021

Our BMW M30 Reinforced damperhubs made in hardened high strength steel with very close tolerance. These are made to be shrickfit on to the cranknose.

Limited batch make sure you get one.

Our new BMW M5x/S5x/M30 High Strenght flywheels bolts.Dynotech Racing Fasteners These are made for our drifting flywheel...
02/05/2021

Our new BMW M5x/S5x/M30 High Strenght flywheels bolts.

Dynotech Racing Fasteners
 
These are made for our drifting flywheels for ZF Motorsport clutches. But will work for all bmw flywheels.
 
12.2 x 29mm
 
They have a range from 200.000 psi to 290.000 psi depending on grade P1, P2 or P3.

You will find these bolts under the brand "Dynotech Racing Fasteners" made by Dynotech Sweden. We will launch a whole serie of studs and bolts that will cover the most used model and applications.

 
* Made in Europe, Sweden

* QC checked

* Special ultra high strength steel and heat threatment process.

* Premium product can not be compared to lower end stuff out there.

Torque spec = 170nm with l**e.

To order them, You will find them in our webshop.


Custom gearsleeve made from simple customer drawing. :)
29/04/2021

Custom gearsleeve made from simple customer drawing. :)

Our Bmw M10/M30/S14/S38 DCT medium mass billet flywheels for dct gearbox from s65 and s55. These are highend premium qua...
29/04/2021

Our Bmw M10/M30/S14/S38 DCT medium mass billet flywheels for dct gearbox from s65 and s55.

These are highend premium quality flywheels 100% made in Sweden. All flywheels are balanced and QC to perfection. Spline hubs are shot peened for strenght and fatigue properties. All splines are precision wire edm'd and are 100% oem tolerance. These are for those looking for top quality products that works.

We recommend using our high strenght flywheel bolts that are made to perfectly guide in hub and dct flywheel for a perfect fit. These are also available for our drifting flywheels for ZF Motorsport clutches. More info soon...

They are not added in the webshop yet so please dm or email for order.

Our Bmw M5x/S5x DCT medium mass billet flywheels for dct gearbox from s65 and s55 w and without adapter plate. These are...
26/04/2021

Our Bmw M5x/S5x DCT medium mass billet flywheels for dct gearbox from s65 and s55 w and without adapter plate.

These are highend premium quality flywheels 100% made in Sweden. All flywheels are balanced and QC to perfection. Spline hubs are shot peened for strenght and fatigue properties. All splines are precision wire edm'd and are 100% oem tolerance. These are for those looking for top quality products that works.

We recommend using our high strenght flywheel bolts that are made to perfectly guide in hub and dct flywheel for a perfect fit. These are also available for our drifting flywheels for ZF Motorsport clutches. More info soon...

They are not added in the webshop yet so please dm or email for order.

Adress

Täktvägen 6
Röbäcksby
90440

Öppettider

Måndag 09:00 - 17:00
Tisdag 09:00 - 17:00
Onsdag 09:00 - 17:00
Torsdag 09:00 - 17:00
Fredag 09:00 - 17:00

Telefon

+46702382255

Webbplats

Aviseringar

Var den första att veta och låt oss skicka ett mail när Dynotech postar nyheter och kampanjer. Din e-postadress kommer inte att användas för något annat ändamål, och du kan när som helst avbryta prenumerationen.

Kontakta Affären

Skicka ett meddelande till Dynotech:

Genvägar

Dela

Typ