Wallmek i Kungälv AB

07/09/2026

🔩 Remove seized Land Rover pinch bolts with controlled hydraulic force
Developed for fast and controlled removal of seized lower control arm pinch bolts on Range Rover Evoque L538/L551 and Discovery Sport L550.

Used with the 04-00028-100 Ball Joint Snapper 8.8 Ton, hydraulic force removes corroded bolts directly on the vehicle and helps separate the control arm from the steering knuckle. The vehicle-specific design works in the limited space available, reducing hammering and saving workshop time.

Key benefits:
✅ Controlled hydraulic removal
✅ Used directly on the vehicle
✅ Designed for restricted access
✅ Less hammering and faster removal
✅ Saves valuable workshop time

Important: The steering must be turned to full lock when positioning and operating the tool due to the limited working space.
The 04-00028 and 04-00028-302 are required and sold separately.
Work smarter with the right tool for the job.

03/09/2026

📦 VI SÖKER EN NY KOLLEGA!
Är du noggrann, gillar att jobba praktiskt och trivs när det är full fart? Då kanske du är vår nästa lagermedarbetare!

Vi söker en ny kollega till vårt team i Kungälv. Hos oss blir det en mix av plock & pack, godsmottagning, montering, lagerarbete och problemlösning – allt som krävs för att få våra produkter hela vägen ut till kunder runt om i världen. 🌍
Erfarenhet och truckkort är ett plus, men rätt person och rätt inställning är viktigast för oss.

📍 Wallmek, Kungälv
⏰ Dagtid med flex
🤝 Kollektivavtal
💪 Friskvårdsbidrag
📅 Sista ansökningsdag: 1 oktober
👉 Skicka CV + några rader om vem du är till [email protected]

Känner du någon som skulle passa? Tagga eller dela! 📲

Är du en person som gillar att arbeta i ett högt tempo med varierande arbetsuppgifter och ett härligt gäng kollegor? Då är det dig vi söker till vårt team på Wallmek i Kungälv AB!

01/09/2026

Come along and see what happened at Elmia Lastbil 2026 in Jönköping – one of the biggest meeting places for the Nordic transport and heavy-duty industry. We had a blast and we hope to see your there August 2028!

18/08/2026

Vi visar nyheter och verktyg som sparar tid! Välkommen till vår Monter B02:18.

13/07/2026

Quality You Can Depend On!
Every component matters.
Precision manufacturing. Durable materials. Reliable performance.
Wallmek equipment is built for workshops that value safety, consistency and long service life.
Engineered by specialists.
Used by professionals.

10/07/2026

Original Design. Proven Performance.
The Fuel Tank Drill trusted by professionals.
Manufactured to deliver safe, efficient and reliable operation day after day.
Built from high-quality materials and designed for demanding workshop environments.
Because professional equipment should never be a compromise.

08/07/2026

The Original Choice for Professional Drain Equipment
When reliability matters, experience matters. Wallmek has been developing professional fuel and fluid drain equipment for workshops and vehicle dismantlers for decades.

Designed in Sweden. Trusted across Europe. Built to last.

✔ Original manufacturer
✔ Professional quality
✔ Long-term spare parts support

03/07/2026

🚛 Seized kingpins? Meet the solution. 💥
Removing stubborn kingpins doesn't have to mean excessive heat, endless hammering, or removing the entire axle.
The Wallmek 03-00048 Universal Kingpin Set combines up to 70 tons of hydraulic force with our unique impact function to break loose even heavily seized kingpins – directly on the vehicle.
✔️ Straight & tapered kingpins
✔️ Up to 70 tons of force
✔️ Reduced workshop downtime
✔️ Faster, safer and more controlled repairs
Built for professional workshops that demand performance every day.
🎥 Watch the full video on our YouTube channel.

29/06/2026

💥 NEW: Wallmek 01-00060 Hydraulic Cylinder – 22 Tons of Power. Only 2.9 kg.
Better performance. Better durability. More power. Wallmek quality.
Meet the next generation of hydraulic workshop cylinders. The new 01-00060 combines an impressive 22-ton pushing and pulling force with a compact design weighing just 2.9 kg.

✔ Only 2.9 kg – easier to handle every day.
✔ Optimized 60 mm stroke for the most common wheel bearings and bushings.
✔ Patented adjustable press rod system using a standard 3/8" extension.
✔ Automatic return piston for faster operation.
✔ Compatible with Wallmek M10–M22 draw bars.
✔ Designed for professional workshops.
Built for demanding jobs where reliability, speed and safety matter. And when extra force is needed, combine hydraulic and impact power with Wallmek punching sockets and punching nuts. 22 tons. 2.9 kg. Unlimited possibilities.

24/06/2026

Something powerful is coming...
For years, workshop professionals have relied on hydraulic force to tackle stubborn wheel bearings, bushings and suspension components. Now it's time for the next step.
More power. Better usability. Smarter design.
A new generation of hydraulic performance is about to arrive.
Launching in 5 days.