dsgmotorsportuk.com

05/07/2026

Key improvements over the V3 version: • New load cell with twice the strength and a full-scale range of 50 kgf • New k**b manufactured from carbon fiber reinforced polyethylene terephthalate for increased strength and durability • High-visibility yellow markings added to improve peripheral rec...

30/06/2026

🚗 A customer contacted us after replacing a headlight, but the new one wasn’t working because it required SCN coding.

📍 The very next day, we visited the customer at their home and completed the coding in just 30 minutes. The headlight was fully functional again, and the vehicle was back on the road.

✅ Fast response. Professional service. On-site support.

Thank you for your trust! If your Mercedes requires SCN coding after replacing a headlight or control module, feel free to contact us.

28/06/2026

✅ Mercedes-Benz diagnostic & coding completed successfully.
Professional SCN coding, software updates, module programming and vehicle diagnostics using dealer-level equipment.

Module Coding & SCN Coding

Professional Vehicle Coding

Vehicle coding is the process of configuring the electronic control units (ECUs) to match the exact specifications and equipment of your vehicle.

Modern vehicles rely on multiple control units that communicate continuously to manage the engine, transmission, ABS, ESP, Airbag systems, lighting, comfort features and many other functions.

Why is coding necessary?

Whenever an electronic control unit is replaced, it must be correctly coded to the vehicle.

Proper coding:

* Matches the control unit to the vehicle’s VIN.
* Activates the correct factory options and equipment.
* Ensures communication between all control units.
* Prevents warning lights and communication faults.
* Guarantees the correct operation of all vehicle systems.

Without proper coding, the new control unit may not function correctly or may generate system errors.

Mercedes-Benz SCN Coding

SCN (Software Calibration Number) is the official Mercedes-Benz online coding procedure used after replacing electronic control units.

Using Mercedes-Benz XENTRY Diagnostics, the vehicle connects securely to the manufacturer’s servers, where the correct factory configuration is downloaded according to the vehicle’s VIN.

SCN coding is required after replacement of modules such as:

* Engine Control Unit (ECU)
* Transmission Control Unit (TCU)
* SAM Modules
* ABS / ESP Modules
* Airbag Modules
* Other electronic control units

Our Services

At DSG Motorsport UK LTD we provide:

* Mercedes-Benz Online SCN Coding
* ECU & TCU Coding
* Module Coding after Replacement
* Software Updates
* Vehicle Configuration
* Professional Diagnostics
* Fault Diagnosis & Software Solutions

We use professional dealer-level diagnostic equipment and genuine software to ensure every vehicle is configured according to factory specifications.

26/06/2026

🚛 TRUCK & BUS ECU REMAPPING WITH KESS3

Looking to improve fuel efficiency and performance without expensive mechanical modifications?

With professional ECU remapping using KESS3, we optimize engine parameters on Volvo, Scania, MAN, Mercedes-Benz, DAF, and Iveco vehicles to improve torque delivery, throttle response, and overall driving efficiency.

✅ Improved low-RPM torque
✅ Better drivability under load
✅ Optimized fuel efficiency
✅ Safe ECU programming with checksum verification
✅ Custom calibration for each vehicle

Every remap is tailored to the specific engine, vehicle application, and customer requirements.

Contact us for more information about truck and bus tuning solutions.

Professional truck and bus chip tuning with KESS3 for Volvo, Scania, MAN, Mercedes, DAF, and Iveco. Improve fuel economy and increase torque.

25/06/2026

SCN Coding – Night Vision Camera & Distronic Programming for Mercedes-Benz

We show you how to perform professional SCN coding and programming for Mercedes-Benz vehicles.

In this case, a stone hit the vehicle on the highway, damaging the Night Vision Camera and the Distronic radar sensor. Since the replacement parts were manufactured later, they came with different part numbers and required SCN coding, software adaptation, and calibration.

We updated the vehicle to the latest software version and successfully performed SCN coding for the Night Vision Camera and Distronic (Adaptive Cruise Control), restoring all functions to factory specifications.

If your Mercedes requires SCN coding, ECU programming, Night Vision Camera coding, Distronic coding, software updates, or module replacement after an accident, contact us. We provide fast, professional service with a 100% satisfaction guarantee.

18/06/2026

🔥 Another Successful ECU & TCU Tuning Project Completed! 🔥

We have successfully performed a Stage 1 ECU remap on a Bosch engine control unit via OBD and a Stage 2 TCU tune on the AL552 Gen2 transmission via Bench method.

This vehicle arrived with exceptionally low mileage and in near-factory condition, which played a key role in achieving outstanding results. After completing the calibration process, we carried out extensive datalogging and performance verification, confirming that both the ECU and TCU are executing all commanded parameters perfectly.

✅ Improved engine performance
✅ Faster gearbox response and optimized shift strategy
✅ Enhanced throttle response
✅ Smoother power delivery
✅ Better overall driving experience

The result is exactly what every enthusiast is looking for – more performance, more responsiveness, and significantly more driving pleasure.

A huge thank you to our client for the trust and the smile after the first test drive. Customer satisfaction remains our top priority.

All software calibrations and tuning services performed by our team are backed by a 100% quality guarantee.