22/02/2025
Od niedawna jesteśmy oficjalnym dealerem MG Flasher i
można u nas zakupić wszystkie produkty, adaptery a także wykonać unlock sterowników po 2020 oraz po 2021r dla silnikow B48,B58,s58,N63,S63
Zapraszam do kontaktu😀
MG Flasher’s Custom Code v7.2.2 has been released for Gen 1 and 2 B48 and B58 vehicles, including hybrids!
Custom Code v7.2.2 focuses on initial support for Motiv’s Re|Flex.
New Features include:
- Logging various channels of Motiv’s Re|Flex, including:
- System status
- Ethanol content
- Low pressure fuel pressure
- Ethanol PI scaling factor
- PI DC raw
- PI DC post factor
- Aux1 Output DC
- Aux2 Output DC
- MGF Limp mode when errors are detected:
- If Reflex reports an error, or,
- If ethanol sensor reports an error, or,
- If no input from Reflex is detected in the last 10 seconds (15 second delay from engine start), or,
- If low pressure fuel pressure drops below 3.0 bar (and a sensor is installed)
The DME is unaware of the additional inputs from aftermarket sensors, so we created the new MGF Limp mode will protect your engine from potential damage by using these sensors. When MG Flasher’s protection mode is activated, the Check Engine Light (CEL) will blink, a custom DTC will appear (in app) and the engine will not make any boost.
For full details on the Custom Code update, please see our user manual: https://mgflasher.atlassian.net/wiki/spaces/MGFLASHER/pages/660570113/Custom+Code+Release+Notes
Further integration of Motiv’s Re|Flex module will be provided with upcoming CC releases. We thank everyone for their support and help in testing, as we continue to develop and add new features to our app! Stay tuned for more Custom Code updates coming shortly!
Happy Flashing,
The MG Flasher Team