Digital Systems

14/12/2021

The largest international automotive aftermarket trade show in the Middle East, Automechanika Dubai 2021

🇦🇪

Jesteśmy na targach Automechanika Dubai. To największe w regionie wydarzenie, podczas którego prezentowane są: komponenty, narzędzia, elektronika, i cała gama produktów oraz usług związanych z sektorem motoryzacyjnym. W hali nr 7, na stoisku 7-F30 są z nami:

▪️
▪️
▪️ Leszek Łosin sp. j.
▪️ Klimawent S.A.
▪️
▪️ Żuralski
▪️ Digital Systems
______________
Partnerzy projektu Pomorski Broker Eksportowy:
Pomorski Park Naukowo-Technologiczny Gdynia
InvestGDA
Inkubator Starter
Regionalna Izba Gospodarcza Pomorza
Stowarzyszenie Wolna Przedsiębiorczość Gdańsk
Agencja Rozwoju Pomorza

22/12/2020

Hope you enjoy the Christmas eve with the ones you love and step into the new year with lots of happiness and good health. Wishing you a merry Christmas and a very happy new year!

22/01/2020

TytanSAT devices: common features' guide - part 9

1-WIRE BUS/iBUTTON INTERFACE
All TytanSAT devices are equipped with an interface to work with 1-wire bus systems such as iButton identifiers (e.g. Dallas Semiconductors DS1990A), digital temperature sensors (based on Dallas Semiconductors DS18B20) and RFID readers equipped with 1-wire interface. The devices firmware enables both identification of people/cargo and temperature measurement from up to four temp. sensors. DS520/B and DS540/B cover immobiliser function – it is executed thanks to use of iButtons.

More information in Tytan®SAT manuals.

20/12/2019

Merry Christmas and Happy New Year

17/12/2019

From 24th to 27th December 2019, due to Christmas holidays, our company will be closed.
For that reason, please plan your orders in advance.

26/11/2019

TytanSAT devices: common features’ guide – part 8

WHAT LEDs TELL US
Both DS520/B and DS540/B signal operation using two LEDs: red 🍎 and green🍏. Red LED signals if TytanSAT device is registered in GSM network and can transmit data to the server. Green LED informs if received GPS/GLONASS signal allows to find actual geographical position of the device.
In normal operation both LEDs should blink every 2 seconds.
After power supply is connected (after restart) both LEDs light up continuously for 15 seconds.

More information in Tytan®SAT manuals.

12/11/2019

TytanSAT devices: common features’ guide - part 7

ACCESSORIES
Additional equipment which is fully compatible with TytanSAT tracking devices:
- contactless RFID 125 kHz cards readers (+ corresponding cards)
- iButton readers
- iButton keys & fobs
- temperature probes
- digital fuel level sensors (concerning co-operation with DS540/B)

Naturally, at any time you can order standard accessories i.e. GSM antennas, active GPS/GLONASS antennas, dedicated cable harnesses.
In case you need more assistance – please contact us and we will be glad to help.

29/10/2019

TytanSAT devices: common features’ guide - part 6

Special events
Apart from report generation due to meeting basic criteria: time-angle-distance, DS520/B and DS540/B devices generate and transmit reports when special events appear:
1. change of ignition state -> ignition is turned ON, ignition is turned OFF
2. change of digital inputs state -> e.g. in case of connection to OEM fuel level sensor
3. use of iButton identifiers -> driver’s identification by any or authorised only iButtons
4. events from CAN/J1708 bus (DS540/B) -> e.g. opening/closing vehicle door/trunk/bonnet
5. change of power supply (TytanSAT devices with internal battery) -> switching from external power to internal battery and vice versa

Depending on the event and the configuration, the devices:
- generate reports which are sent to the server with the nearest data packet transmissions,
- generate reports and transmit data to the server immediately.

More information in Tytan®SAT manuals.

09/10/2019

TytanSAT devices: common features’ guide - part 5
BASIC CRITERIA FOR REPORT GENERATION

TytanSAT devices generate reports if any of basic report generation criteria is met:
1. DISTANCE (default setting: 250m)
- driving constant speed 60kmph, you receive 4 reports per minute at default setting.
2. ANGLE (default setting: 25°)
- this allows precise sampling of tracking points when intensive cornering is done, for example during city driving.
3. TIME (default setting: 60 sec/300 sec)
- time is configured separately for ignition ON (DRIVE) and ignition OFF (PARKING).

By manipulating these 3 values, you obtain optimal result with small data transfer.

More information in Tytan®SAT manuals.

20/09/2019

CAR FREE DAY
On Sunday September 22 we will celebrate World Car Free Day. Let’s swap our cars for mas transit, cycling or walking for at least one day.

17/09/2019

TytanSAT devices: common features’ guide - part 4

ELECTRICAL PROTECTIONS
-reverse polarity protection: reversable, electronic
-device overcurrent protection: non-reversable, internal fuse 3A
-output short-circuit protection: electronic 1.7A

More information in Tytan®SAT manuals.

14/08/2019

Digital Systems will be closed on 15 and 16 of August 😎