StayTuned

StayTuned No promises... Only RESULTS!

10/05/2026
🚨 Safety Reminder for All Drivers  🚨This tie rod went off due to a loose thread. Over time, the lock failed to hold the ...
10/05/2026

🚨 Safety Reminder for All Drivers 🚨

This tie rod went off due to a loose thread. Over time, the lock failed to hold the lock nut in place.

Thankfully, this happened after driving on the expressway, just as the car was moving out of the parking lot.

If this failure occurred while cruising at expressway speeds, it could have led to a serious accident.

⚠️ This is a reminder: always check your suspension and steering components. Small issues like loose threads can lead to catasthrophic failures.

🔧 Regular inspection and timely replacement keep your ride safe and responsive. Don’t wait until the nut won’t hold anymore.

Regular inspection = safer driving.

StayTuned, stay safe!

🚗💨 Unlock the Full Potential of Your Evo! 💨🚗  At StayTuned, we specialize in precision tuning of ECM Link-equipped ECUs ...
08/03/2026

🚗💨 Unlock the Full Potential of Your Evo! 💨🚗

At StayTuned, we specialize in precision tuning of ECM Link-equipped ECUs for the legendary Mitsubishi Lancer Evolution 4G63T DOHC engine.

Whether you’re chasing peak performance on the track or ensuring rock-solid reliability for daily driving, our tuning approach balances power, efficiency, and safety. With ECM Link, we fine-tune fuel maps, ignition timing, boost control, and advanced features to make sure your Evo delivers consistent results, without compromising durability.

🔧 What you get with our tuning:
- Optimized horsepower & torque curves
- Improved throttle response & drivability
- Safe, reliable boost levels
- Data-driven adjustments for long-term engine health

Your Evo deserves more than just raw power, it deserves a tune that’s crafted for performance AND reliability.

📩 Message us to schedule your tuning session and experience the StayTuned difference!

Happy New Year! As we shift into 2026, it’s time to leave the rearview mirror behind and floor it toward a brand-new hor...
31/12/2025

Happy New Year! As we shift into 2026, it’s time to leave the rearview mirror behind and floor it toward a brand-new horizon.

Here are a few high-octane wishes for your year ahead:
* Peak Performance: May your 2026 be defined by maximum output and zero lag in everything you pursue.
* Perfect Handling: Wishing you the grip to hold the line through life's sharpest corners and the composure to stay on track.
* Redline Energy: May your passion stay in the high-RPM range all year long, fueled by adventure and ambition.
* The Right Specs: I hope your year is built with the perfect balance of power, precision, and style.

​Let's make 2026 a year of full-throttle progress. Keep it between the lines and enjoy the drive!

🛑 4G63 Alert: Don't Let Clogged Injectors Kill Your Boost! 🐌💥​We diagnosed this Mitsubishi Lancer struggling with rough ...
30/12/2025

🛑 4G63 Alert: Don't Let Clogged Injectors Kill Your Boost! 🐌💥

​We diagnosed this Mitsubishi Lancer struggling with rough idling and hesitation. The culprit? A set of clogged and stuck fuel injectors.

​On a high-revving 4G63 DOHC Turbo, fuel isn't just power—it's protection. A clogged injector causes lean spikes, which is the fastest way to melt a piston under boost.

​🛠️ The Fix: No Compromises
​While cleaning was an option, reliability is the priority. To ensure this 4G63 stays safe at high RPMs and heavy load, we’ve decided to replace the entire set with brand-new injectors. Why we replaced rather than cleaned:

*​Guaranteed Flow: Perfectly matched spray patterns across all cylinders.
*​Peace of Mind: Eliminates the risk of a "stuck-shut" injector during a pull.
*​Peak Performance: Ensuring the fuel system can keep up with the turbo's demand.

​When you're pushing a legendary engine to its limits, "good enough" isn't enough. Fresh injectors = Safe boost. 🏎️🔥

​Are you team "Clean & Save" or team "New & Reliable"? Let us know below! 👇





🔧  Electrical Refurbishment Update!  🔧Completed the general refurbishment of the electrical wirings for this Lancer  CB ...
08/12/2025

🔧 Electrical Refurbishment Update! 🔧

Completed the general refurbishment of the electrical wirings for this Lancer CB equipped with the legendary 4G63T engine! 🚗💨

This project involved:

✅ ️Engine Bay Wiring: Cleaned up and reorganized for better reliability and easier maintenance.

✅️ Interior Wiring: Checked, repaired, and rerouted for improved safety and functionality.

✅️ Connections & Grounds: Ensured all terminals are corrosion-free and properly secured.

✅️ Harness Protection: Added fresh insulation and protective sleeves for long-term durability.

This wasn’t just a cosmetic cleanup, this was a deep dive into reliability and performance. 🙂

The goal? A cleaner, safer, and more efficient electrical system to match the performance of the 4G63T. 💪

If you’re planning a similar project, remember:
- Label your wires
- Use quality connectors
- Test everything before final assembly

Next step: Tidy up the engine bay aesthetics and maybe add some wire looms for that OEM+ look. 🔥





🔧 Lancer Fuel System Overhaul! 🚗💨Pulled out this rusted fuel tank and a stuck-up fuel pump from a Lancer — years of corr...
12/10/2025

🔧 Lancer Fuel System Overhaul! 🚗💨

Pulled out this rusted fuel tank and a stuck-up fuel pump from a Lancer — years of corrosion and neglect finally caught up. 😬 Fuel flow was compromised, and the engine was struggling to breathe.

✅ Solution?
Replaced with a fresh fuel tank and installed a brand new Walbro 255 LPH high-performance fuel pump! 💪
Now it’s ready for smoother drives and future mods!

📸 Swipe to see the before-and-after shots!
👉 Rusted tank & pump vs. clean new setup

💡 Reminder: Regular fuel system maintenance is key to keeping your ride reliable and responsive.



Here’s a look under the hood before we roll up our sleeves and bring this machine back to life. Every bolt, wire, and wo...
27/09/2025

Here’s a look under the hood before we roll up our sleeves and bring this machine back to life. Every bolt, wire, and worn-out part tells a story and we’re about to write the next chapter.

Stay tuned as we restore this engine to its former glory and get it running like new again! 💪🚗



Lancer GSR 1997 Tune-up (08/31/2025)✅️ ECU scan✅️ Ignition misfire troubleshooting✅️ Rough idle fix✅️ Valve clearance ad...
01/09/2025

Lancer GSR 1997 Tune-up (08/31/2025)

✅️ ECU scan
✅️ Ignition misfire troubleshooting
✅️ Rough idle fix
✅️ Valve clearance adjustment
✅️ Performance tuning
✅️ MAF connector replacement

Thank you for the trust! 🙇‍♂️🙏

Emergency Alternator Replacement (08/29/2025) 🆘️By always bringing the complete and proper tools, makes the job easy. 🔧S...
01/09/2025

Emergency Alternator Replacement (08/29/2025) 🆘️

By always bringing the complete and proper tools, makes the job easy. 🔧

Special thanks to Enzo Castro for the quick sending of the alternator replacement part. 🙏

Kearu - A non-running green Lancer CB with 4G63T DOHC engine was sent to us on a flat bed tow truck for revival and reco...
19/07/2025

Kearu - A non-running green Lancer CB with 4G63T DOHC engine was sent to us on a flat bed tow truck for revival and reconditioning after being stucked in a garage for several years.

All means necessary must be performed to bring it back to life.

Thank you for the continuous trust! 🙏

Address

Bay
4033

Website

Alerts

Be the first to know and let us send you an email when StayTuned posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to StayTuned:

Share