30/06/2023
🚘 Well, you've seen it here first 🚘
It's been a struggle and a heartache to come to this decision, but it has to be.....
We're offering up our Brand New Superstock for sale.
Brand new Heyburn built and designed T-Mac high tensile steel chassis. We have worked alongside Nathan and Tony with this build. It started off with a hiss and roar, but as the years went by, it slowed up tremendously. Work commitments and family life have to come first sometimes.
700 grade Domex steel chassis throughout. All CNC laser cut and folded to produce all parts of this car. Many, many hours have gone into it. The whole car has been built on accuracy, starting from the chassis table , which was made using a laser level. Nathan Heyburn T-Macs .....
The top part of the coffin has been made wider to fit in a wider driver. The roll cage has subsequently been made wider to suit. This it to allow the driver to sit in a more comfortably position and have room for the diff to come up without hitting the seat and also the driver to have room to move their right arm and elbow.
Everything on this car is brand new, although the dust on top is quite old now.
Setup for Toyota V8 (sale is minus motor, but can come to an arrangement)
Hargreaves Motorsport cradle, which incorporates 3 oil scavenge ports for the dry sump system and sump pan. Headers/Exhaust system to suit Non VVTI engine Included in sale. All hoses throughout the car are Speedflow from GSS in Auckland.
Chassis is set up with beam suspension in the front, copying the geometry of the independent cars. Aztech shocks and springs package to suit.
Rear suspension currently is set up as a coil-over 4bar setup again with Aztech shocks and springs. The rear suspension can also be swapped out to torsion suspension setup. All included.
Rear differential is Quick-change using Nathans designed long axle tube, making allowance to move your wheels in and out for setup. Also, the axle is correct offset of the engine. Spare axle is also included in the sale
Raptor gearbox with the standard shim kit as well as a Foot Eng Shifter. There is also a spare Foot Eng shifter for your spare box. It has a custom-made driveshaft with high angle flanges and HP joints installed.
Dash has all glow in the dark liquid fill autometer gauges. Quickstart ignition and kill switches.
Some wiring has been completed, but as the years have gone by, the wiring technology has improved tremendously. So, you will probably need to be redone to suit your needs.
6 mighty bead 6 pin rims, 3 left 3 right.
10 i think front rims
Spare hubs and stubs are complete, ready to bolt on.
Things to be done:
# Wheel guards - the ones made for this car have been used up in various teams' races and have not been returned.
# Bonnet - not yet sourced or mounted
# Wing - not yet sourced. There is however 2 sets of wings stays made up to suit roof mounts.
# Exhaust shield makeup and mount.
# Internal panels over gearbox/driveshaft.
# Internal padding if required.
# Mount computer.
It has been a great venture building this car to where it sits now, we have learned a lot from listening to others and watching others' cars as we progressed building this car. But unfortunately we haven't had the time complete and compete in it.
Our loss, your gain!!! It's now time for someone else to enjoy it.
Please, serious inquiries only. I don't have time to sit on social media answering silly questions
Selling car as a roller, with all spares that I have for it on the shelves.
$80kono
Contact me for more information, but better to be seen with your own eyes.
0274264165
