4dGas Bike Sport

4dGas Bike Sport Motorcycle repairs, specialising in off road.

07/02/2026

Gauge wheel works a treat.
Will speed up baling and protect the baler.

Modified an old wheel barrow wheel to fit the baler to give it a floating pickup, exactly what’s needed on our lumpy gro...
25/01/2026

Modified an old wheel barrow wheel to fit the baler to give it a floating pickup, exactly what’s needed on our lumpy ground.
Should bale much better and quicker now.

New needles fitted. A good check over for both and greased ready for baling.
05/12/2025

New needles fitted. A good check over for both and greased ready for baling.

Hose guides mounted now.Just a mock up though as more polishing needed.
06/04/2024

Hose guides mounted now.
Just a mock up though as more polishing needed.

The colour is growing on me especially with the rear pad the same.
06/04/2024

The colour is growing on me especially with the rear pad the same.

Covered the seat with some alcantara but think I might change the colour slightly.I wanted grey but this might be a touc...
05/04/2024

Covered the seat with some alcantara but think I might change the colour slightly.
I wanted grey but this might be a touch too light.
Will build the bike up and look again before I make any changes.

A little bored of polishing and I’ve only done the front mudguard….thats not quite done yet either!
04/04/2024

A little bored of polishing and I’ve only done the front mudguard….thats not quite done yet either!

Clear is done now with a slight false start initially but sorted now.Will wait for a few days now to harden then cut and...
01/04/2024

Clear is done now with a slight false start initially but sorted now.
Will wait for a few days now to harden then cut and polish.

Fitted decals to the tank today and also now have the nose cone painted as well.Just clear to do now and that will be th...
16/03/2024

Fitted decals to the tank today and also now have the nose cone painted as well.
Just clear to do now and that will be the paint job done.

Some more progress.Just the tank to put decals on, paint the nose cone then clear it all.
10/03/2024

Some more progress.
Just the tank to put decals on, paint the nose cone then clear it all.

Now has the correct Michelin decal and not the later type which was supplied with the decal kit.
07/03/2024

Now has the correct Michelin decal and not the later type which was supplied with the decal kit.

Making progress and I must say this has been the hardest thing to do on this project so far.If I did another I would mas...
03/03/2024

Making progress and I must say this has been the hardest thing to do on this project so far.
If I did another I would mask and paint.

Address

466 Mapara Road
Taupo

Alerts

Be the first to know and let us send you an email when 4dGas Bike Sport posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 4dGas Bike Sport:

Share