Sticky Autoworx

Sticky Autoworx Sticky Autoworx — Custom fabrication, performance mods & full builds done right. Steel, stainless, aluminum, titanium, we craft precision, power & perfection.

Built by hand for drivers who demand more. Taupō, NZ. 🔧🔥

🔥 NEW PRODUCT — RC COLORADO 4” STAINLESS SNORKEL 🔥Our new Sticky 4” Stainless Snorkel to suit the RC Holden Colorado is ...
14/09/2026

🔥 NEW PRODUCT — RC COLORADO 4” STAINLESS SNORKEL 🔥

Our new Sticky 4” Stainless Snorkel to suit the RC Holden Colorado is here! 🤌

Big 4” stainless. Tough styling. Great airflow. But making a stainless pipe look good running up the side of a guard is the easy part...

The magic happens underneath the guard. 👀
That’s where the Sticky Way really comes into it.
We’ve put the time into designing the under-guard section properly — focusing on fitment, routing and airflow rather than taking shortcuts just to make it “easy”.

Because what you can’t see is just as important as what you can.

🔧 DIY installation friendly
🛠️ Professional installation available
💨 4” stainless construction
🇳🇿 Designed & fabricated right here at Sticky Autoworx

📦 Can be used with the factory airbox or paired with one of our Sticky Snorkel Boxes
Available to order now through our website.

Got an RC Colorado and want us to fit the complete setup? Send us a message and we’ll get you sorted.

Built tough. Built right. The Sticky Way.

Very proud to receive feedback like this! My team did a great job in a short time and Carl was clearly very happy with h...
01/07/2026

Very proud to receive feedback like this! My team did a great job in a short time and Carl was clearly very happy with how everything turned out!

Ontop of that Carl and his partner and co driver Lynsey finished 5th in their first series, super proud of them and happy to be apart of the journey!

Johan's Chevy C10 chassis is looking super sharp. 🤌We're getting close now. The chassis is almost finished, with all the...
01/07/2026

Johan's Chevy C10 chassis is looking super sharp. 🤌

We're getting close now. The chassis is almost finished, with all the major fabrication wrapped up and ready to receive the body for the final time. A bit of plumbing and a few last tidy-up jobs, then it's time to drop the cab back on.

What started out as a simple LS swap quickly turned into, "this thing has to sit on its ass." From there, the classic "while we're at it" snowball took over. Every nut, bush and bolt has been replaced or upgraded, meaning this C10 is going to feel like a brand-new truck underneath.

She's going to be low. She's going to be loud. She's going to turn heads everywhere she goes.

Built right. Built tough. The Sticky Way. 👊

Finally sinking our teeth into this VF Valiant.The mission?Take an already tough old girl and make it downright disrespe...
10/06/2026

Finally sinking our teeth into this VF Valiant.

The mission?

Take an already tough old girl and make it downright disrespectful. We're starting at the ass end, chasing the sort of fitment that gives enthusiasts a chub and has purists reaching for the keyboard.

Then there's the engine.

Let's just say it's got enough attitude to turn that chub into a hardon before the tyres have even done a full rotation.

Tough stance. Tough engine. Zero intention of being sensible.

Stay tuned. This one's going to get a little out of hand.

26/05/2026

Fresh stock just landed on the website 👊

We’ve been busy adding a heap of new products including mild steel & stainless steel turbo downpipe flanges, turbine flanges, and manifold flanges 🔥

Built for fabricators, tuners, and anyone who’s sick of wasting time with poor fitting parts. More options, more sizes, and more products being added regularly.

Check out the latest additions 👇

stickyautoworx.co.nz⁠

Built tough, built right – The Sticky way 👊

LVVTA CERTIFICATION DAY IS BACK 👊Got a project that needs certifying?We’ve locked in another LVVTA Certification Day at ...
13/05/2026

LVVTA CERTIFICATION DAY IS BACK 👊

Got a project that needs certifying?

We’ve locked in another LVVTA Certification Day at Sticky Autoworx on Friday 29th May.

Whether it’s suspension, chassis mods, engine conversions, airbags, brake upgrades, steering mods or a full custom build — now’s the time to get your ride legal and back on the road.

✔ Avoid costly fines & rego issues
✔ Increase safety & peace of mind
✔ Add value to your build
✔ Support Kiwi car culture

Spots are limited and these days fill up fast.

📍 Sticky Autoworx
28 Manuka Street, Taupo

📞 Message us now to book your cert inspection.

Built tough, built right – The Sticky way 👊

08/05/2026

Making solid progress on Johan’s C10 🔥

Rear chassis notch is done, all the bracing has been completed, and the 4-link setup along with all bracketry is now finished off. Engine is sitting where it should be with mounts completed and ready to go.

Next move is pulling the cab off Monday to finish the chassis work underneath before it heads away for paint.

This build is starting to look seriously tough 👊
Built tough, built right — The Sticky way.

04/05/2026

Luca and I putting our Wastegate Starter Tubes on display today — teaching him young and keeping it in the family.

These aren’t just another piece on the shelf… they’re designed to make your life easier in the workshop.

✔️ Pre-formed bend
✔️ Scalloped to suit your main pipe
✔️ Saves time on fab
✔️ Cuts down extra bends
✔️ Less welding = less cost

Whether you’re running a wastegate, doing a cut-out, or building a 2-into-1 — these take the guesswork out and speed the whole job up.
More efficiency. Better results. Less mucking around.

👉 Available now: stickyautoworx.co.nz





Out with the old, in with the tough stuff 👊We’ve pulled the tired old 10 bolt diff out of this square body C10 and upgra...
23/04/2026

Out with the old, in with the tough stuff 👊

We’ve pulled the tired old 10 bolt diff out of this square body C10 and upgraded it to a much stronger 12 bolt to handle the extra power, kinda like Chevs version of the Ford 9 inch💪

Blasted and stripped down, removing all the old bracketry off and cleaned up ready to go back in ready for what's next.

Next step 👉 building a triangulated 4 link setup and getting the airbags in so this thing lays it's ass on the ground! 😮‍🔥

Stay tuned… this one’s going to be a weapon.

🌐 stickyautoworx.co.nz

Built tough, built right – The Sticky way 👊

Address

28 Manuka Street
Taupo
3378

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm

Telephone

+64275778040

Website

Alerts

Be the first to know and let us send you an email when Sticky Autoworx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category