PJ Vapour Blasting

PJ Vapour Blasting PJ Vapour Blasting Rotorua
locally owned and operated

Not just blasting going on at the moment a fair bit of mechanical happening tooRestoration on a Italian TM250 and a trus...
10/08/2026

Not just blasting going on at the moment a fair bit of mechanical happening too
Restoration on a Italian TM250 and a trusty old XR200 here's a few before and afters

Just finished some RD350 engine and fork parts thanks Scott Moir for sending them over appreciate your support and the r...
26/06/2026

Just finished some RD350 engine and fork parts thanks Scott Moir for sending them over appreciate your support and the results are some of the best yet

Still a fair bit on, thanks to everyone who have been dropping the parts off appreciate it and it's great to see the res...
02/06/2026

Still a fair bit on, thanks to everyone who have been dropping the parts off appreciate it and it's great to see the results and thanks to Mopar Joe who sent us a Pic of his engine build

First post for a while, but we are still trucking along with all the blasting, thanks to everyone who's dropping off the...
13/05/2026

First post for a while, but we are still trucking along with all the blasting, thanks to everyone who's dropping off there projects to us we appreciate your custom
Just not blasting but we are also doing a restoration on at Italian TM250 check out the progress here's some before and after shots

Wow lots and lots going on we are blasting like we've never blasted before Sit back and take a look at what we have been...
28/02/2026

Wow lots and lots going on we are blasting like we've never blasted before
Sit back and take a look at what we have been up to. Big thanks to all our returning customers (Lakes Honda, jake @ midnight Fabrication, Steve from Bike Bits Whanganui, Dean Thomas, Phil Sheppard Engineering, Paul Neil, Vaughan and lots more including our new customers that have come on board we appreciate you using our service.

First post for a little while, still plenty going on, couple of jobs in. Robbies intake manifold don'e so he can put it ...
20/12/2025

First post for a little while, still plenty going on, couple of jobs in. Robbies intake manifold don'e so he can put it back together of the Xmas break, talking about Xmas break we will be open right through including the stat days of you need anything done get in contact
And here's a couple of pics of Mitches Honda CR project

Still a fair bit going onEven thow im currently working at Lakes Honda Motorcycles If you want anything motorcycles rela...
05/11/2025

Still a fair bit going on

Even thow im currently working at Lakes Honda Motorcycles
If you want anything motorcycles related come on down and see me and cut a deal

Had an awesome job come in,a customer was restoring a 1876 windcheaster rifle and we had the pleasure of cleaning it up for him
We also done a 2nd job for Brendan on his car restoration
Still a few spots left to fit your projects in

First post for a while,Bit of a busy weekend blasting a race lawn mower engine and some gearbox cases, more to come
27/10/2025

First post for a while,
Bit of a busy weekend blasting a race lawn mower engine and some gearbox cases, more to come

Awesome stuff thanks to NZ Blokes for the great feedback most appreciated
07/10/2025

Awesome stuff thanks to NZ Blokes for the great feedback most appreciated

Address

136 Tarukenga Road Ngongotaha
Rotorua

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+64273983882

Website

Alerts

Be the first to know and let us send you an email when PJ Vapour Blasting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to PJ Vapour Blasting:

Shortcuts

Share

Category