CWC Engineering

CWC Engineering Chris Wratt Custom Engineering offers high quality, custom fabrication and engineering services to suit many different applications from dragsters to trailers.

Contact us by message or phone to discuss your requirements and pricing.

Bar work all completed on this monster hilux in preparation for cert 👌 front and rear guard bars and some side steps to ...
02/04/2026

Bar work all completed on this monster hilux in preparation for cert 👌 front and rear guard bars and some side steps to suit

Nice set of driveshaft hoops installed on this hilux in preparation for cert 👌
02/04/2026

Nice set of driveshaft hoops installed on this hilux in preparation for cert 👌

Nice commy we had in recently for some new mid mufflers and rear pipes turned out mint and sounds amazing 👌 video in the...
02/04/2026

Nice commy we had in recently for some new mid mufflers and rear pipes turned out mint and sounds amazing 👌 video in the comments

Had an interesting request lately about if we can make this front seat on this camper turn around to face backwards, tur...
01/12/2025

Had an interesting request lately about if we can make this front seat on this camper turn around to face backwards, turned out it was alot easier than I thought 🤣 does help when we have mounted plenty of seats into different cars over the years. with a custom made base that uses the standard feet and plastic trim so it still looks factory, we mounted the swivel plate ontop with a custom adaptor so it can still slide forwards and back. turned out bloody well 👌 cheers for the job mate

It's always cool when cars that yourve worked on over the years come back for more. This time on this beauty of a evo we...
26/10/2025

It's always cool when cars that yourve worked on over the years come back for more. This time on this beauty of a evo we were tasked to install the carbon fibre roof splitter. As you probably know aftermarket fibreglass/carbon parts often don't fit very well so alot of careful trimming, a heaps of weights and a tonne of urethane was needed to get it into place but worked out sweet 🤙 also good time to check over previous jobs which was the exhaust, airbox and intercooler piping we built few years ago now and everything is still as it should. Cheers for the job again bro lookin forward to next 1

Another exhaust finished up on this classic recently 👌 after doing a full 3 inch exhaust we found out the stainless head...
13/10/2025

Another exhaust finished up on this classic recently 👌 after doing a full 3 inch exhaust we found out the stainless headers had alot of cracks in them. After discussing with the owner how hard itll be to fix them the decision was made to make a new mild steel set which we setup on a small jig to get the fl**ge locations the same, worked out a treat. Cheers for the job bro 🤙 video in the comments

Had this gem in recently for a couple new exhaust manifolds and downpipe👌 a nice 6-2-1 system took abit of getting right...
25/09/2025

Had this gem in recently for a couple new exhaust manifolds and downpipe👌 a nice 6-2-1 system took abit of getting right but very pleased with how it turned out. cool to see the owner sticking with the 6 cyclinder. Cheers for the job mate 🤙

Nice exhaust we finished up recently on this beauty of a holden 👌 trimmed the bonnet up also to clear the intake sittin ...
03/08/2025

Nice exhaust we finished up recently on this beauty of a holden 👌 trimmed the bonnet up also to clear the intake sittin out top. Sounds bloody good cheers for the job bro. Vehicle sound in the comments

Bit slow on the socials lately but not because we ain't been busy. Completed us this new set of headers for this beauty ...
18/07/2025

Bit slow on the socials lately but not because we ain't been busy. Completed us this new set of headers for this beauty old holden which is a beast on the road and on the drag strip. Not much room to work with but we got it done in the end. Drivers side ended up being a two piece manifold for making removal and maintenance alot easier

This beast of a hilux has been a pretty sweet job for us round here so was bit sad to see her leave. Originally in for a...
24/01/2025

This beast of a hilux has been a pretty sweet job for us round here so was bit sad to see her leave. Originally in for a exhaust system it quickly turned into a full blown build built to cert spec in anticipation for being on the roads aswell as the mud 👌 with a cammed ls1 mounted up front controlled by a haltech ecu we were short for room for the cooling system so decided to mount it all on the back. The huge radiator with custom shroud and twin fans should keep everything under control. We Redone the brake lines to suit the body lift and heat shielded everything important as room around the exhaust was pretty tight. The Twin pump fuel system was mounted on a custom made chassis bridge that has the surge tank and battery mounted on it aswell. Huge list of mods so def something to check out in person if you get the chance 🤙 cheers for the job bro can't wait to hear it roaring round the hills

30/12/2024

End Of Year Mahi Update, Huge thanks to our customers over the year and our followers on the channel 😁👊 catch yall in 2025 have a wicked new years and be safe

Address

Masterton
5810

Telephone

027 427 1105

Website

Alerts

Be the first to know and let us send you an email when CWC Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share