Trimworx

Trimworx Specialising in the repair, polishing and welding of Stainless and Alloy Trims/Mouldings.

We can also repair bumpers and much more, contact us to discuss your requirements.

Just thought I would show you some of the other jobs we have taken on in the workshop lately, we are not all about trim ...
30/08/2026

Just thought I would show you some of the other jobs we have taken on in the workshop lately, we are not all about trim repairs.
First up the naval artillery shell that i repaired and my polisher Sam finished off that was donated to the local RSA, next up a 3 1/2" oval stainless exhaust fabricated in the workshop by my son Matt plus a little input from me and polished by Sam this system is going on a Toyota Chaser, and finally a trans housing for a 32 Roadster destined for the Roadster show in the USA.

Some before and after shots of the 58 Chevy trim.
10/08/2026

Some before and after shots of the 58 Chevy trim.

On to the next job, 58 Chevy 2 door showing it's age.
20/07/2026

On to the next job, 58 Chevy 2 door showing it's age.

Pontiac drip molding/gutter trim, had a split that needed welding very tricky as these trims are very thin. End result c...
16/07/2026

Pontiac drip molding/gutter trim, had a split that needed welding very tricky as these trims are very thin. End result came out pretty good, using 309 stainless wire is almost a perfect match.

The T top off a Corvette has been polished and returned to the customer, a lot of work was done on the left hand side, a...
12/07/2026

The T top off a Corvette has been polished and returned to the customer, a lot of work was done on the left hand side, and with no car avaliable i was a little concerned about fitment,
I needn't have worried customer rang yesterday it fitted spot on, that was a big relief it's allways on your mind when you send a peace of trim back not fully knowing if it is going to fit.

This is a T top off a Corvette. It was a bit bent and twisted and did not fit the car, a little tap and file here and t...
10/07/2026

This is a T top off a Corvette. It was a bit bent and twisted and did not fit the car, a little tap and file here and there and it's ready for polishing.

Something a bit different for Trimworx, a few engine parts going on to a roadster that need to be very shiny, still a b...
21/06/2026

Something a bit different for Trimworx, a few engine parts going on to a roadster that need to be very shiny, still a bit of work to do on the heads, we will try some different polishers as the finish is not quite there yet.

On to the next job, A box full of Lincoln Continental Looking forward to this one.
17/06/2026

On to the next job,
A box full of Lincoln Continental Looking forward to this one.

Some before and after shots of early Toyota Crown wheel arch trim, one of the more challenging peace,s to repair as they...
01/06/2026

Some before and after shots of early Toyota Crown wheel arch trim, one of the more challenging peace,s to repair as they have to fit the wheel arch perfectly.

It must be grille week, Another one finished and ready for shipping.
20/05/2026

It must be grille week,
Another one finished and ready for shipping.

Address

Hamilton
3288

Telephone

+64212312709

Website

Alerts

Be the first to know and let us send you an email when Trimworx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Trimworx:

Shortcuts

Share

Category