Elite Motor Trimmers

Elite Motor Trimmers we can do anything and everything. No job to big or small. Automotive,marine, contract and commercial

Another truck from last year was Rachel's chopped 37 chev. This was an Australian built truck that she was set on amen...
08/02/2026

Another truck from last year was Rachel's chopped 37 chev. This was an Australian built truck that she was set on amending some of their questionable styling choices.. we removed the center console and reshaped the seat to give her a better driving position. We added some decent sized front speakers , including an under seat sub and a hidden Bluetooth stereo. All finished up with some dark burgundy and charcoal leather and matching seatbelts, giving it a great contrast. Thanks Ryan for the photos as I forgot to take some..

Peter's torana turned up with a real tidy interior already. Unfortunately, it was cream and didn't quite fit the bil...
05/02/2026

Peter's torana turned up with a real tidy interior already. Unfortunately, it was cream and didn't quite fit the bill. No problems at all,we got to work and transformed it into a slr5000 spec trim using the correct black grain vinyl and charcoal golf ball.

Ian's beautiful barrel nose came out exceptional. We put together a tailored seat with additional lumber support. One pe...
04/02/2026

Ian's beautiful barrel nose came out exceptional. We put together a tailored seat with additional lumber support. One peice headliner and some German square weave carpets. Then, we wrapped everything else along with some billet trims.

Valiant dash that we recently finished. There was a lot of rust brewing up under the vinyl. and treated . matched a...
04/02/2026

Valiant dash that we recently finished. There was a lot of rust brewing up under the vinyl. and treated .
matched and wrapped in some lemans vinyl. Refurbished gauge cluster and steering wheel.

Nice little tidy up feature on rx2 was a 3d printed center cluster. With no heater or clock required. .fab re worke...
09/07/2025

Nice little tidy up feature on rx2 was a 3d printed center cluster. With no heater or clock required. .fab re worked it to fit a full size head unit and the hgt shifter display sits nicely back inside like factory. Best part it fits better than the original.

Last time we saw James GTR , it was on its final assembly stages for cert. Once completed, it returned so we could modi...
07/04/2025

Last time we saw James GTR , it was on its final assembly stages for cert. Once completed, it returned so we could modify the heck out of the rear seat and rear qauter cards to fit behind the roll cage. we stitched up a similar design to the original plastics out of the same suede as the headliner. Apparently , these few modifications cut the cabin noise in half! This is one tuff street car. 30psi 💪

Another car that was recently completed. A true sleeper packing a modern puch. Built here in hamilton by Dan and the t...
01/04/2025

Another car that was recently completed. A true sleeper packing a modern puch. Built here in hamilton by Dan and the team . The un expecting es**rt has been fitted with a 2.0 ecoboost engine along with a 6 speed transmission attached to a hilux rear end. Those little 13x9s never stood a chance!
We assembled a set near mint set of recaro fishnets with genuine 90s recaro spectrum fabric. Followed with a rear seat. Along with new carpets/headliner /doorcards /console, etc...
The car has now parted ways with Dan and is off to its new home for the new owner to enjoy.

THE OG. brought in his rad vr4 in . We definitely know the challenges with these older cars and their brittle plastic...
28/03/2025

THE OG. brought in his rad vr4 in . We definitely know the challenges with these older cars and their brittle plastics. As 50% of the time, they are broken to hell. We managed to sorce a buch of new parts .then recovered everything else to bring it back to its former glory. We made custom molded carpets / full plaid/fabric/vinyl seat combos. Trimmed a/b/c pillars and roof. And built a sub box with some nice and simple paneling to finish the trunk. We can't wait to see this rolling on some titans one day soon.

32 roadster that rolled in a while back . John & Sharon Allen gave us the task to finish the interior for them. A be...
27/03/2025

32 roadster that rolled in a while back . John & Sharon Allen gave us the task to finish the interior for them. A beautiful, well-built, and thought-out car.

Much better. Recently finished is this sweet little Thunderbird for . The team has been busy at work organizing t...
03/03/2025

Much better. Recently finished is this sweet little Thunderbird for . The team has been busy at work organizing the recent work and compliance of this gem. With a new paint and glass like paint correction from . And new brightwork. We had to bring the upholstery up to the standard of the car. These cars really are a passion of love.

First day back of 2025, and Joe and myself have picked up where we left 24 . But we have returned with some real good ...
13/01/2025

First day back of 2025, and Joe and myself have picked up where we left 24 . But we have returned with some real good news. Prior to xmas, I managed to aquire Dashboard restorations equipment and stock. This company has been the staple of the industry for the last 40years. And im very proud to keep it going, This will be a great addition to Elite motor trimmers as it will give us the ability to vacuum form Dashs/doorcards/armrests and anything we wish to have a factory finish. This has always been the Achilles heel of a great finish. We can't wait to start

Address

88 Duke Street
Hamilton
3204

Telephone

+64273700748

Website

Alerts

Be the first to know and let us send you an email when Elite Motor Trimmers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category