Central Performance

30/10/2026

Has Haltech been on your wishlist? Now’s the time to buy with their 40th Birthday Sale 🎉 Message us if you have any questions or want to buy that ECU or Dash that you have been dreaming of

30/08/2026

From Carby’s to EFI! The variety we get means no one day is ever the same.

27/08/2026

Another R32 Skyline through the workshop 🔧🏁

A bit of ECU, dash and gearbox setup work on this one, including:

• Basic sensor configuration on the MoTeC M150
• Fabricated mounts for the ECU and adapter
• Set up the Haltech IC-7 dash to display custom inputs
• Configured the sequential to achieve the correct torque limiting

A lot of the work is in getting everything talking to each other properly and making sure the setup works the way it should.

A big thanks to Powertune Australia for the help and guidance with getting the sequential and torque limiting setup sorted. 🤝

Another R32 one step closer to being ready to perform. 🏁

30/07/2026

For years, if you wanted to run an aftermarket ECU with an automatic transmission, your choices were pretty limited… swap it to a manual or an older hydraulic/mechanical auto.

Not anymore.

The technology has come a long way, and with Haltech, integrating modern automatic transmissions has never been more achievable.

We’ve had great success setting up everything from:
🏁 GM 4L series transmissions in multiple configurations
🏁Toyota 4-speed automatics
🏁 Nissan 4-speed automatics
🏁 And now the popular GM 6L series transmissions—with fantastic results.

Whether you’re building a street car, race car, or something in between, there’s a good chance we can help make your automatic transmission work seamlessly with your aftermarket ECU.

Thinking about your next combo? Get in touch—we’d love to help bring your project together.

21/07/2026

🚨 Meet the newest members of the CPL team! 🚨

Please give a warm welcome to our latest recruits…

🔩 Millsy the Mill – precision is his middle name (well…almost).
✂️ Routs the CNC Router – cuts straight to the point every single time.
🚜 And of course, they’re joining our long-serving team member, Forky the Forklift, who’s been doing the heavy lifting around here for years!

The new hires don’t drink much coffee, never call in sick, and are happy to work overtime…although they’re not much good at the Friday shout! 😆

We’re excited about what these new additions mean for our customers and can’t wait to put them to work.

22/05/2026

14/03/2026

⛽️ Burn fuel… or save it? Your choice.

A CAN Wideband gives your ECU accurate AFR feedback, allowing the ECU to fine-tune fuel delivery for better efficiency, and less wasted fuel.

💥 Dial in your fuel trims. Save fuel.

Message us to book your CAN Wideband install. 🔧

21/01/2026

Meet Jayden…he is our eldest boy (14) and is now officially on the payroll (school holidays and after school only)! If you see him around the workshop he, like his father, is always up for a yarn! Nick has got him doing many tasks including interpreting some of his “crayon” drawings to machine up the odd part, a good skill for this young fella to have!

30/11/2025

Just a quick post to say we aren’t taking on anymore bookings until March 2026. We are at full capacity and would rather not have to sleep at the workshop to get through everything, so no matter how “small” your job is it will have to wait until March. Please also bear in mind that we do book up really quickly so some forward thinking is needed. We would also really like it if you can use our booking system (email or message Kat) so she can organise the finer details rather than going through Nick (who tends to forget), that way we can avoid double booking and if you have gone to Nick rather than Kat you might have to wait a bit longer to get in if a double booking has occurred.

16/11/2025

Making the most of the Haltech Nexus Skyline Plug-in