Bateri2uofficial

24/05/2020

19/05/2020

How to jump start The car
Park both cars in neutral next to each other so that they’re close but not touching. Open the bonnet; the jump lead should be able to reach both vehicles.

2. Connect the first end of the RED positive lead to the positive terminal on the working battery. Do the same for the other end of the lead for the flat battery.

29/04/2020

HOW TO CLEAN FOR YOUR CAR BATTERY TERMINALS?

If your car battery is corroded, not enough electricity can be passed to the terminals and through the cables to power your car’s electrical system for optimum performance. You can clean away corrosion with a few simple steps.

If your car battery is corroded, not enough electricity can be passed to the terminals and through the cables to power your car’s electrical system for optimum performance. You can clean away corrosion with a few simple steps.

Step 1: Rinse and scrub the terminals
Rinse the battery terminals with a solution of one heaping tablespoon baking soda to 1 pint water, and then thoroughly scrub the terminals and around the base of the posts with an old toothbrush.

Step 2: Dry the battery
Dry the battery and terminals with a clean towel, making sure to wipe away residue and corrosion around the terminals.

Step 3: Remove battery terminals
Loosen the nut on each cable clamp and remove the terminals from the posts by twisting and pulling them off.

Tip
Remove the terminal from the negative post, marked with a minus sign, first. Then remove the terminal from the positive post, marked with a plus sign.

Step 4: Inspect the cables and clamps
Inspect the cables for excessive wear and corrosion, and inspect the battery and terminals for damage. If there is excessive damage, replace the parts or the battery to avoid future problems.

Step 5: Clean the terminals
Insert the end of the battery brush into the terminals and rotate it back and forth until the inside of each terminal is uniformly shiny and all of the grease, dirt, and corrosion is scrubbed away.

Tip
Since battery brushes are conical and terminals are different sizes, you may have to flip the terminal over to effectively clean the other side.

Step 6: Clean the posts
Push the open end of the battery brush over each post and rotate it back and forth for about a minute, or until the posts are uniformly shiny and all of the grease, dirt, and corrosion is brushed away.

Step 7: Clean the battery
Pour more of the baking soda and water solution over the top of the battery, wipe it down with a clean rag, and then dry it off with the towel. Then reattach the terminals to the posts, starting with the positive cable.

Step 8: Perform regular maintenance
Perform regular battery maintenance, checking for corrosion several times a year, to ensure your electrical system stays in good working order and you don’t get stranded.

28/04/2020

http://www.bateri2u.com/
Car battery Price from Rm 179
Klang Valley Area .

24/04/2020

TIPS ON HOW TO MAINTAIN & PROLONG THE LIFE OF YOUR CAR BATTERY

1. Keep the battery terminals clean and inspect regularly (i.e. monthly) for corrosion.
2. Run your car before you drive. Try to keep your car running for several minutes before operating the car accessories and the vehicle itself, allow the battery to get topped off by the alternator which produces electricity and as a by-product charges the car battery after voltage drops in the battery.

24/04/2020

HOW EXACTLY DOES A CAR BATTERY WORK?

The car battery provides the jolt of electricity necessary to power all the electrical components in your vehicle. Talk about a pretty huge responsibility. Without battery power, your car, as you’ve probably noticed, won’t start.