KarBuddies Auto Care

06/05/2026

“TECHNICAL AWARENESS” APPROACH

TOPICS :
WHY DID MY RADIATOR FAIL RIGHT AFTER A SERVICE?

It’s a question many car owners ask. This Myvi owner was in our shop just last week. While everything looked fine during the routine check, older cooling components (like plastic tanks and aluminum fins) can fail suddenly due to pressure changes or age.

The owner noticed a small leak this week and we didn't take any chances. We replaced the radiator immediately to save the engine from a costly "overhaul" job.

✅ Lesson of the day: Always stay alert to your car’s behavior, even after a service. We’re glad we could catch this before things got messy!

VISIT US AT :
KARBUDDIES AUTO CARE

MORE INFORMATION :
WWW.WASAP.MY/+60133211862

LOCATION 📍
24 JALAN KUCHAI MAJU 16
KUCHAI ENTREPRENEUR PARK
58200 KUALA LUMPUR

Use Waze to drive to Karbuddies Auto Care, 24 Jalan Kuchai Maju 16, Kuala Lumpur: https://waze.com/ul/hw283d49qt

OPENING HOURS :
MONDAY-SATURDAY 9.00AM-2.30PM
SUNDAY 9.30AM- 2.30PM

#来时好好的

23/04/2026

17/04/2026

MERCEDES-BENZ C200 W205 升级 Monaer 刹车片 ！！！

安全，从来不容妥协！今天这辆 Mercedes-Benz W205 到店进行日常维护。
车主选择了来自 Monaer 的高性能刹车片：
✅ 低粉尘： 告别黑漆漆的轮圈，保持长久洁净。
✅ 更静音： 告别刺耳的刹车声，享受静谧驾驶。
✅ 高性能： 反应更灵敏，制动距离更短。
专业的安装流程，只为每一段旅途的安心。
车主朋友们，刹车片磨损别硬撑，欢迎预约检查！
📍 KARBUDDIESE AUTO CARE (KUCHAI LAMA)

📞 WWW.WASAP.MY/+60133211862

07/03/2026

拒绝刹车点头！CT200h 换装 Monear 陶瓷刹车片初体验

原厂刹车粉尘太多？低速刹车总有“咯吱”异响？
这次给爱车换上了网上风很大的 Monear 陶瓷刹车片。实测下来，脚感比原厂更线性，没有那种突兀的撞击感，制动响应非常扎实。
最关键的是：真的没粉尘！ 轮毂跑了一周还是亮的。对于强迫症车主来说，这几百块钱花得值。

#汽车保养 #刹车片 #改装分享

09/09/2025

10/08/2025

The image illustrates how to test a Crankshaft Position Sensor (CPS), which is a vital component in an internal combustion engine, monitoring the crankshaft's position and rotational speed. This information is relayed to the Engine Control Unit (ECU) for precise timing of fuel injection and ignition.
How to test the Crankshaft Position Sensor (CPS) using a multimeter:
Connect the multimeter:
As shown in the image, connect the multimeter's probes to the two terminals of the crankshaft position sensor. The red probe should be connected to the positive terminal and the black probe to the negative or ground terminal.
Set the multimeter to resistance (Ohms):
The image displays the multimeter set to measure resistance (Ω), which is the correct setting for this test.
Compare the reading to specifications:
The multimeter in the image shows a reading of 533 Ω. You should compare this reading to the specified resistance range for your vehicle's make and the type of sensor (VR or Hall) using the provided table. For example, a Mazda VR sensor should have a resistance between 400-550 Ohms.
Interpret the results:
If the measured resistance falls within the specified range, the sensor is likely functioning correctly. If the reading is outside the range or shows an open circuit (infinity, indicated by '∞' for Hall sensors in the table), the sensor may be faulty.

17/06/2025

MAZDA SKYACTIV DIRECT INJECTION ENGINE.

1 OF THE IMPORTANT MAINTENANCE.

WALNUT BLASTING DECARBONIZE.

MAKE YOUR ENGINE BACK TO ORIGINAL.

For more information:
www.wasap.my/+60133211862

Location📍
24 Jalan Kuchai Maju 16
Kuchai Entrepreneur Park
58200 Kuala Lumpur.

Use Waze to drive to Work, 24 Jalan Kuchai Maju 16, Kuala Lumpur: https://waze.com/ul/hw283d49qt

Opening Hours:
Monday-Saturday 9.00am-2.30pm
Sunday 9.30am-2.30pm

09/06/2025

Mercedes-Benz C-class W204

定期更换牙油，延长使用寿命。要不然就像这辆车一样，牙箱报废，花更高的费用还牙箱。

For more information:
www.wasap.my/+60133211862

Location 📍
24 Jalan Kuchai Maju 16
Kuchai Entrepreneur Park
58200 Kuala Lumpur

Use Waze to drive to Work, 24 Jalan Kuchai Maju 16, Kuala Lumpur: https://waze.com/ul/hw283d49qt

Opening Hours:
Monday-Saturday 9.00am-6.30pm
Sunday 9.30am-2.30pm