Transmisiones Automáticas & Fuel Injection Bejarano

01/06/2026

https://gearsmagazine.com/magazine/adaptive-precision-how-zfs-8-speed-refined-the-cvi-concept/?sfnsn=scwspmo&fbclid=IwdGRjcASK2QdjbGNrBIrYamV4dG4DYWVtAjExAHNydGMGYXBwX2lkDDM1MDY4NTUzMTcyOAABHmEmO53YRPX2OrPnuiEii3AZp1oIaUxtGue-5FKihxKSqJhTTtyOcjuLSzQS_aem_6D-ALQqvYiSvX7513dQasg

12/09/2025

Good read!! 👀

https://gearsmagazine.com/magazine/tackling-clutch-failure-in-the-gm-6l80-90/

26/12/2024

https://www.facebook.com/share/p/KmJE5dfvbeYCecTn/

Happy Holidays to you and your family!

22/09/2023

When checked for codes, a P1719 comes up for “Inaccurate Engine Torque Signal.” The TCM receives this over the CAN, causing it to initiate failsafe.

22/09/2023

Sonnax has provided the following guide on critical wear areas and vacuum test locations for the Jatco/Nissan JF011E.

13/07/2023

The Ford 10R80 family of transmissions has become known for the CDF clutch cylinder sleeve moving out of position.

18/06/2023

With the right equipment and access to the proper procedures to follow, resets and relearns help technicians reduce comebacks, prevent component damage, and keep the occupants...

18/06/2023

The Ford 6F35 transmission uses an internal Digital Transmission Range (TR) sensor (Figure 1, above) to provide a fixed frequency duty cycle to the Transmission Control Module (TCM) for five different manual control lever positions. They are Park, Reverse, Neutral, Drive and Low. Related Articles -....

04/03/2023

The easiest thing to say would be: The manual transmission was first and the automatic came second. End of article. Well, that’s true… sort of.

16/11/2022

if this style of valve body is used in a non-stop/start application, the transmission will appear to be working properly in a vehicle when it is up on the hoist; but once it is on the ground, it will barely move.