15/04/2025
In this post, we’re diving into the Buddy Boat’s technical side — everything not related to design, interior, or aesthetics. Just hardcore maintenance and safety!
Thank you Kalkara Marina Co Ltd for the comprehensive support and the flawless ex*****on of all the work on the yacht.
So, what did we do with Buddy Boat throughout March and April?
These months were truly busy months — we carried out full technical maintenance, reinforced the structure, and thoroughly prepared the boat for the season:
1. Interior work and coatings:
• Removal of gelcoat from the inner hull sides.
• Filling and fairing of corners with epoxy filler, followed by sanding.
• Internal hull reinforcement — 10 layers of By Excel structural material applied to both sides.
• Final sealing layer — 1 coat of West System Resin.
2. Mechanics and hull:
• Manual cleaning of the hull below the waterline from fouling and marine growth.
• Servicing of seacocks, raw water filters, and valves.
• Maintenance of rudder bearings, shafts, and shaft seals.
• Osmosis check — moisture levels within normal range, no blistering.
3. Electrical and electronics:
• Complete replacement of all batteries.
• Installation of a new battery charger.
• Full service of all onboard electronics: diagnostics, cleaning, inspection of connections, and functionality check.
4. Other important work:
• Replacement of all zinc anodes.
• Servicing of the hydraulic steering system.
• Inspection and cleaning of the fuel tanks.
The result: the technical condition of the boat is excellent. The hull is reinforced, all systems are serviced, and the electronics are running perfectly. Buddy Boat is fully ready for the season!
We’ll share more about the “beauty updates” in the next post!