Quelles sont les heures d'ouverture ?

Lundi 09:00 - 18:00 Mardi 09:00 - 18:00 Mercredi 09:00 - 18:00 Jeudi 09:00 - 18:00 Vendredi 09:00 - 18:00

AutoTuner

The AutoTuner Tool is the simple, fast and universal solution for ECU and TCU remapping.
(370)

18/09/2026

FORD TI-VCT & HYBRID RELEASE: Continental EMS220x ECUs go live via 100% OBD NR! 🇬🇧⚡🚗

Supported Fleet Highlights:
✅ Ford Fiesta, Focus, B-Max & EcoSport 🚗
✅ Ford C-Max & Mondeo 2.0 HEV 🔋
✅ Lincoln MKZ 2.0 HEV 🇺🇸

Update your Tool software today and elevate your workshop capabilities! 🔌

More info: https://www.autotuner.com/blogs/news/continental-ems2204-ems2205-ems2208

16/09/2026

SUZUKI MOTORCYCLE RELEASE: Mitsubishi MH8115F goes live via 100% OBD VR! 🇯🇵🏍️⚡

Supported 2021+ Fleet: ✅ Suzuki SV 650 ✅ Suzuki DL 650 V-Strom ✅ Suzuki AN 400 Burgman / Skywave

💡Hardware Requirement: This protocol requires our [Euro 5 6-pin motorcycle OBD cable] to connect to the vehicle!

Update your Tool software today and expand your motorcycle capabilities!

15/09/2026

FORD DURATEC RELEASE: Continental EMS210x ECUs go live via 100% OBD! 🇬🇧⚡🚗

Take full engine management control over Ford Fiesta 1.25i / 1.6i, Mondeo 1.6i and B-Max 1.4i platforms on your AutoTuner Tool! The Continental EMS2101, EMS2102, EMS2103 & EMS2106 ECU series is now supported directly through the diagnostic port. 🚀

Supported Fleet Highlights:
✅ Ford Fiesta (2008 - 2013)
✅ Ford B-Max (2011)
✅ Ford Mondeo (2007)

Update your Tool software today and elevate your workshop capabilities! 🔌

More info: https://www.autotuner.com/blogs/news/continental-ems2101-ems2102-ems2103-ems2106

13/09/2026

🇪🇸 ¡Hola España 🇪🇸

¡Nos complace presentar a nuestro distribuidor oficial, Chiptuner S.L. / Andres Bens, en Marbella, España!

👉 Ponte en contacto con ellos a través de nuestra sección de distribuidores: https://www.autotuner.com/pages/dealer/chiptuner-s-l !

🇪🇸 Hello Spain 🇪🇸

We are pleased to introduce our official dealer, Chiptuner S.L., in Marbella, Spain!

👉 Get in touch with them through our dealer section: https://www.autotuner.com/pages/dealer/chiptuner-s-l !

12/09/2026

🇺🇸 Hello USA! 🇺🇸

We are pleased to introduce our official dealer, Extreme Power House, in Las Vegas, Nevada, USA!

👉 Get in touch with them through our dealer section: https://www.autotuner.com/pages/dealer/extreme-power-house!

11/09/2026

HEAVY DUTY / AGRI RELEASE: Bosch MD1CE100 & MD1CE101 go live on Bench! 🚛🌾⚡

Commercial transport, agricultural, and heavy machinery giants join your AutoTuner Tool lineup! Take full control over Bosch MD1CE100 (TC299 + TC389) & MD1CE101 (TC299 only) ECUs in Bench mode following the Mail-in Unlock process. 🚀

Supported Fleet Highlights:
✅ MAN Trucks (TGX, TGL, TGS, TGM) & Ford Trucks F-MAX 🚚
✅ Volkswagen Trucks (Constellation, Meteor) 🚛
✅ Fendt 700 Vario (CORE75 7.5L engine) 🌾
✅ Case IH, New Holland, Claas & Steyr 🚜
✅ Doosan / Develon & Case Construction 🛠️

💡 Hardware Tip: Speed up your workbench workflow with our dedicated MAN & New Holland Bench Cable! 🔌

Update your AutoTuner software today and elevate your heavy-duty capabilities!

More info: https://www.autotuner.com/blogs/news/bosch-md1ce100-md1ce101

10/09/2026

STELLANTIS 1.2 PURETECH RELEASE: Bosch MG1CS032 goes live on Bench! 🇫🇷⚡🚗

High-demand daily drivers across the Stellantis fleet powered by the 1.2 PureTech / Turbo engine join your AutoTuner Tool lineup! 🚀

Supported Fleet Highlights:
✅ Peugeot 208, 2008 & 301 🦁
✅ Citroën / DS 3 Crossback 🇫🇷
✅ Opel & Vauxhall Corsa / Mokka ⚡

💡 Hardware Tip: Speed up your workbench workflow with our dedicated PSA Bench Cable! 🔌

Update your AutoTuner software today and expand your workbench capabilities!

More info: https://www.autotuner.com/blogs/news/bosch-mg1cs032

09/09/2026

MOTORCYCLE & SCOOTER RELEASE: Motion ECUs go live via 100% OBD Normal Read! 🏍️🔥⚡

Take full control over Motion ECUs (DE08, FE08, FE08.02, SE08 & MT05.C) straight through the diagnostic port on your AutoTuner Tool! 🚀

Enjoy a full physical readout (Normal Read) to adjust fueling and ignition maps, optimize throttle response, and perform custom engine calibrations across a wide range of modern models. 📈🏁

Supported Fleet Highlights:
✅ QJMOTOR (SRK RR, SRV V) 🏍️
✅ Benda (Napoleon, Redstone, Rock, Supernovae) 🛵
✅ Zontes (F 703, RR 703) ⚡
✅ KL Motorcycles (Brera, Brera X 300) 🛴
✅ Keeway, Hyosung, RKS, Romet & Togo 🏁

Update your Tool software today and expand your two-wheeler engine optimization services! 🔌

More info: https://www.autotuner.com/blogs/news/motion-de08-fe08-fe08-02-se08-mt05-c

08/09/2026

AGRI / HEAVY DUTY BETA RELEASE: Bosch MD1CS069 & MD1CE101 live on 100% OBD NR! 🚜🌾⚡

Agricultural and construction machinery tuning coverage explodes on your AutoTuner Tool! Take full control over Bosch MD1CS069 & MD1CE101 ECUs straight through the diagnostic port in OBD Normal Read (BETA) mode. 🚀

Supported Fleet Highlights:
✅ Case IH & Case Construction (Farmall, Puma, Optum, Magnum, Quadtrac, Axial-Flow...) 🔴
✅ New Holland (T4, T5, T6, T7, T8, T9, CR, CX, FR...) 🔵
✅ Claas (Arion, Axion, Nexos...) 🟢
✅ Deutz-Fahr, Same & Lamborghini (Series 4E, 5, Dorado, Explorer...) 🟡
✅ Steyr, Landini, McCormick & Massey Ferguson 🚜

📢 TEST IT & SHARE YOUR FEEDBACK! As this protocol is in BETA, your hands-on field experience is vital. Test OBD read/write operations in the shop or on the farm and send us your field feedback! 🛠️💬

More info: https://www.autotuner.com/blogs/news/bosch-md1cs069-md1ce101-beta

07/09/2026

MERCEDES CLASSIC DIESEL RELEASE: Bosch EDC15C6 family goes live via 100% OBD Normal Read! 🇩🇪

Legendary 4, 5, and 6-cylinder Mercedes-Benz CDI engines join your AutoTuner Tool lineup!

Enjoy a full physical readout (Normal Read) to deliver smooth low-end torque, fuel economy maps, and maintenance tuning across an iconic fleet—including the rare C 30 CDI AMG!

Supported Models: ✅ Mercedes C, CLK, E, S, ML & G-Class (200 CDI to 320 CDI) ✅ The rare C 30 CDI AMG (3.0 5-cylinder Diesel) ✅ Sprinter & Viano Fleet (2.1 CDI, 2.7L & 3.0 V6)

Update your Tool software today and bring high-performance tuning to classic Mercedes diesels!

More info: https://www.autotuner.com/blogs/news/bosch-edc15c6-edc15c6-5-70

Adresse

Luxembourg

Heures d'ouverture

Lundi	09:00 - 18:00
Mardi	09:00 - 18:00
Mercredi	09:00 - 18:00
Jeudi	09:00 - 18:00
Vendredi	09:00 - 18:00

Téléphone

+35220602024

Site Web

https://www.autotuner.com/

Notifications

Soyez le premier à savoir et laissez-nous vous envoyer un courriel lorsque AutoTuner publie des nouvelles et des promotions. Votre adresse e-mail ne sera pas utilisée à d'autres fins, et vous pouvez vous désabonner à tout moment.