Screamin Motors

10/08/2026

10/08/2026

Ulterior Motives well received the flares and they look massive .. 😍



Rate these curves💥

18/07/2026

what do you think about this? what should be done to it?😜

16/07/2026

If you know you know 😂.. I know a lot of hates going around and we will be improving our project to the sky. Slowly but surely .. currently we managed to achieve 1.7s 60ft. Our 0-100 and 100-200 have alot of wheel spins on the UNPREP SURFACE WITHOUT warming up the tires Of which is way more impressive AND AN Achievement for us than what we were stuck into BEFORE. Right now we r working on the (better wheel and tires also) of the car, so that it will not drag a lot against the air. Thanks to Ulterior Motives for the custom wide wheels metal fenders. Soon kitili will have those fenders on it after we receive them. instagram . We don't need to say it's fast 😂 we are spinning even on 325s at the speed of 180kmph+ with 55kmph peak slip. We do have a lot of room for improvement. ALSO many other JDM and gdm we builds, left them with a good base to work on them 😜. To make that base is what makes the build expensive and reliable.
0-100 3.2sec spinninggggggg😂
1/8mile 6.6sec @ 194kmph trap spininnggggg😂
1/4 mile 9.8sec @ 251kmph trap spiningggggg😂
100-200 3.7sec spininnngggggg😂
200-250kmph 2.7sec

30/06/2026

Excessive wheel spins recorded during the pull. Trying to reach our goal with some limitations. "GOD IS GREAT" that helped us to reach where we r right now. And a huge thanks to our tuner that the sauce we have on our cars we work to make the power safely and slowly while checking the health of the drivetrain. People want a tone of power at the go of which we don't do. Our tuners don't rush to add power until the drivetrain is comfortable to handle it. SO BURN THE RUBBER NOT THE SOULS 😂. We are coming back stronger and harder

21/06/2026

Making some use of some wide goodies on the .. trying to eliminate the traction issue.. the rear section will cover it with some wife wheel arches and finish it with the body colour . So far the car has been amazing ...
Previous tire setup 275s managed to get mid 3s 100-200 and mid 2s 200-250... Was unable to take 200-300 due to wheel spinning even over 200kmph.
Peak 50kmph wheel spin difference during 100-200.. need to fix this issue first with the dummy tire for the body job to jump it to the final stage . Thanks to TAI WORKSHOP for the wheel adaptors .. need some modification to fit them confidently on the car. Soon will be back

17/01/2026

Time to get these goodies installed on

31/12/2025

When you have a lot going around you😂

29/12/2025

That's A medium boost pulls and it's little too spicy on the second. When kitili hits the medium boost (40psi) 😋 the rears want pull out badly. Soon we will make some adjustments for medium boost pulls from dig. We build cars for reliability. Since we built kitili it has seen several high, medium boost pulls and infinite lows. With the gods grace never saw any major breakdown apart from breaking cosmetics to support the power band. We believe in the theory of spending once and spending it wisely rather than lying under the car after every pull.