Garage Doghouse - DHR

12/03/2026

Every time I see this image on Facebook, (This image is original to DHR )I feel sorry for the people who are being forced to pay more than double the actual price in Japan. We sell our products for 13,800 yen. And they're high quality. The products we sell have laser etching on one side, as shown in the photo. If the racing wiper kit you recently purchased doesn't have this, you've just paid double the price and drawn the old maid. In the age of AI, there are no language barriers. It's not a good idea to feel secure just because English is spoken. Our native language is not English, but we haven't experienced any inconvenience in our business.

10/03/2026

garage DOGHOUSE #クラミニ #クラミニ道 ＃ローバーミニのある生活 #ローバーミニ #クラシックミニ #ミニクーパー #ミニ #ミニ好きと繋がりたい

10/03/2026

This handmade toolbox pays homage to the No. 37 car that competed in the 1965 Monte Carlo Rally. It even features a replica of the chassis number plate. The handle is hand-stitched with nubuck. The price is 260 GBP (tax included for Japan).

15/01/2026

In 2026, both Nintendo's video game controllers and the DHR TPS already use TMR sensors, with the DHR TPS costing around £60.

29/12/2025

I think it can be easily translated.

クラッシックミニ用オリジナルパーツの紹介からHPの日常更新記事として発信しています。

25/12/2025

This racing fuel filler cap fits Minis up to 1996 without any problems. On 1997 and later models, the gap between the protruding part of the fuel filler cap and the black rubber tank neck seal is shallow, making it impossible to install. In that case, replace it with a UK-spec Mpi Mini tank neck seal, which is about 5mm lower. DHR also sells tank neck seals as a set.

Therefore, for Japanese-spec Minis from 1997 onwards, please purchase the tank neck seal set.

If we want to send a Facebook message to those who leave a comment, your account must be set up to receive messages. Otherwise, please send us an email directly if you have any questions.

18/12/2025

弊社よりトヨタランドクルーザー40系ディーゼル2Bエンジンのシリンダライナーを販売いたしました。打ち替え後に内径を仕上げる為、ライナー内径を97ミリで製作しております。
68000円／４本セット（税送料別）

#ランドクルーザー

#ランクル40
#シリンダーライナー
#ヨンマルミーティング
#ランクルちゃんねる
#ランクル
#ランドクルーザーチャンネル


#ランドクルーザー
#ランクル40


#ランクルのある風景
#ランドクルーザー40
#ランクル40

12/12/2025

Now back on sale after a few years. Easy to install, it captures blind spots over your shoulder without relying on impractical fender or door mirrors. This mirror supports your driving without relying on a monitor or other device. Even if you can't read the Japanese in the image, you should be able to understand the meaning.

The dog in the mirror is my face🤭

07/12/2025

For a small amount of money, you can give your slightly worn-out Mini an eye-catching look😉

05/12/2025

This is a very famous cat, and we'll be running through December with this same vibe.😆😆😆

04/12/2025

These are newly created stickers. Since small details tend to peel off easily when cutting letters, we printed them on a transparent sheet as a base. We wanted to draw them in silver, but since this wasn't possible with an inkjet printer, we recreated them by breaking them down into similar shades and painting the base white. Because they are printed with high-strength UV ink, they are more weather-resistant and abrasion-resistant than regular printing. They also look great on glass. We will include them with your purchase of our products.

26/11/2025

How do you enjoy your Mini? Conventionally, the 1275cc OHV engine is no match for modern cars of the same displacement or engines in a class above it. However, if you don't mind the engine's lifespan shortening by the factorial of the power output, it delivers a fantastic ride. Even with the same engine output, the choice of final gear can make a big difference in performance. For road use, I think an engine tuned to a 3.4 final gear ratio is the perfect choice, allowing you to experience the acceleration sensation in third and fourth gears.

The engine I'm currently building is a Japanese-spec SPi with MPi coils, a stroke of 83.3mm, and a piston bore of 73mm, for a total of 1394cc. I'm replacing the cam with an SW5 type and installing a custom-made cylinder head. The compression is 10.5, and the stock ECU will be used, with only the injectors replaced with ones with increased injection volume. I'm currently waiting for the cylinder head valve guides to be re-mounted and the valve seats to be cut.

The exchange rates for both the 💶euro and the 💷pound are far more favorable for purchases from Japan. Take this opportunity to try out the Mini-specific parts sold by DHR.😉