月曜日 10:00 - 19:00 水曜日 10:00 - 19:00 木曜日 10:00 - 19:00 金曜日 10:00 - 19:00 日曜日 10:00 - 19:00

Apexmoto Inc

Motorcycle sales, repair and customization. Apexmoto is a one stop motorcycle shop. We have bike sales, auction service, maintenance, customization, repairs etc.

A fully kitted workshop with Lathe, CNC milling, welding ( AL and Steel ), Media blasting, Spray painting, Plasma CNC cutter, Tire changing and balancing, Dynojet Dyno for power tuning and much more. Feel free to visit us.

13/03/2026

Ducati 851 Superbike, a little prep before crating and shipping to OZ. To me one of the best looking Ducati’ of all time. Going to a good home, and who knows, might get to see her on the track in OZ.

01/03/2026

H2 in for power check. Should have grabbed some Dyno pics, but too focused on the job. Just under 225hp, but too lean so a tune is needed and it might hit 230+.

14/02/2026

Racing carbs ( FCR ) were too close to the gas tap and the cam chain tensioner was also getting a tap on harder bumps. So installed a shorter cam chain tensioner and machined the carburetor spigots on the mini lathe, to be 10mm shorter. Perfect outcome with 10mm clearance on the tensioner and 10mm extra room for the fuel tap.

25/01/2026

Leaky fuel tap replaced with a Pingle unit ( imho big improvement ). Plus new rocker gasket to fix the slow leak. Some wiring to tidy up and then shaken.

17/11/2025

2012 W800 shaken and this is not going to cut it! Aftermarket fuel controller installed by previous owner was never adjusted. Tweaked the setting and 0.7% and 80ppm and Pass.