KS Motorsport

03/08/2026

10-11 PSI to 21-22 PSI.

​Swapped out the stock setup on the Pajero SFX for a larger turbo with upgraded turbines and impellers—same housing architecture, massive difference in airflow.

​Third gear test pull pushed it straight to 22 PSI.

​What’s the next upgrade you’d pair with this boost increase? 👇

​

01/08/2026

Traveled all the way from Tamil Nadu to KS Motorsport for more boost. 🚙💨

​We’re upgrading this Pajero SFX with a hybrid turbo setup—same factory architecture, but with larger turbine and compressor wheels for maximum flow.

​Baseline Test: Stock turbo caps out at 11 PSI in 3rd gear.

​Part 2 dropping soon to see what the upgraded turbo pushes. Stay tuned! 🔧⚡

​Hashtags:

Pajero OffroadIndia EngineTuning CustomTurbo MumbaiCarScene

29/07/2026

Tired of DPF lag and AdBlue system failures holding your diesel back?

​Unclog your engine's true potential. Our Stage 2 Performance Package drops in a custom downpipe paired with precision software to eliminate stock restrictions, boost horsepower, and improve fuel efficiency.

​More Power & Torque

​Sharper Throttle Response

​Zero AdBlue/DPF System Headaches

​Ready in stock today.

​Locations:

​South Mumbai: KSMOTORSPORT

​Suburbs: Nirav Patel

​DM or contact either shop directly to book your slot.

13/07/2026

10/07/2026

Heavy SUV. Heavy demands. Zero room for a spongy pedal.

​Factory rubber brake lines expand under pressure, robbing you of braking force and control when you need it most. This Steel Braided Brake Line Kit for the Fortuner 2.8L swaps out factory weak points for race-grade stainless steel durability.

​Firm, predictable pedal feel

​Zero line expansion under extreme heat

​Bolt-on precision fitment

​Upgrade your control.

​ FortunerLovers PerformanceParts

30/06/2026

Rubber expands under pressure; steel doesn’t. Upgraded the [Thar / Fortuner] with braided stainless steel brake lines for zero expansion, razor-sharp pedal response, and maximum stopping power when it actually matters. No more mushy pedals on the descent. 🛑👇

24/06/2026

Back in Stock: The Borla T-Muffler ⚡️
​Need the perfect solution for a clean dual-exit setup? The Borla T-Muffler is officially back on the shelves and ready to transform your exhaust note.
​Don't let the compact size fool you—this is engineered for maximum flow and that signature Borla growl without taking up massive underbody real estate. Perfect for BMWs and other dual-exit performance setups.
​The Specs:
​Length: 18 inches
​Inlet/Outlet: 2.5 inches (dual exit)
​Build: Premium stainless steel
​Ready to upgrade your sound? DM us or call today to claim yours before they sell out again.

​ BMWIndia

16/06/2026

Better airflow = Better performance. 💨

Take a look at the custom air channels we incorporated into our new intercooler for BMW F10 - 520/530. Instead of a standard block, this stepped core design maximizes surface area for cooling while utilizing factory mounting points. If you're running a tune, your stock intercooler is a bottleneck. Upgrade to a true bolt-on solution.

Link in bio to order.

AutoPerformance

13/06/2026

Borla Mufflers + Decat = 📈?

We took this 2015 Mercedes SLK V6 to Automech for a transformation.

Clip 1: Borla mufflers (Cats ON)

Clip 2: Borla mufflers (Cats OFF)

Built CarSofInstagram

09/06/2026

Why This Belongs On Your Thar CRDE:
Massive Thermal Efficiency: Reduces intake temperatures by up to 20°C to keep your air charge dense and your engine safe.

Maximum Core Volume: 104% larger than the OEM cooler for vastly superior heat dissipation.

Direct Fitment: 100% bolt-on installation. No cutting, no structural modification required.

Optimized Performance: Noticeable recovery in low-end torque and improved fuel efficiency under heavy loads.

Stop letting heat hold your Thar back. Upgrade your cooling efficiency today.

DM us to book yours or call 📞 9004307000 for inquiries.
Available for shipping pan-India. 📦

OffroadIndia TharLifestyle 4x4India TurboDiesel PerformanceTuning IndianAutomotive CarModsIndia