SRI Vishnu SAYEE

18/12/2014

Automatic trans fluid & filter:

In cars with conventional automatic or clutchless gearboxes, fluid is to the transmission what oil is to the engine in terms of function and importance. It fights friction and keeps things within safe operating temps. Ignoring it pretty much leads to the same issues: expensive repair bills at the mechanic. Fortunately, prevention is similarly easy. Check the fluid periodically, top off with the specific kind recommended in your owner’s manual and change it occasionally along with the filter.

When to replace: Every 2 years or 24,000 miles.

17/12/2014

Air filter:

Most often out of sight and out of mind, the air filter deserves better, and a place on your car part replacement calendar is a start. Try running with your hand over your mouth, and you’ll get an idea how much your engine depends on air. That air for the engine and airflow sensor still has to be free of contaminates, though, and that’s your air filter’s job. Be aware of manufacturer recommendations for replacing related airflow components like the PCV valve and oxygen sensor, if your car has them.

When to replace: 12 months, 12,000 miles or as needed.

17/12/2014

Power-steering fluid:

On your car-part replacement calendar, it doesn’t get much easier than where your power steering fluid is concerned. Still, give it proper consideration, since it lubricates the system and keeps the steering feel consistent. Periodic checks of the fluid are done with a glance at the reservoir or the dipstick inside it. Make sure you add only the manufacturer’s suggested fluid type and talk to a technician if the level drops considerably or you feel surges of resistance as you turn the wheel.

When to replace: Inspect level with every engine-oil change, top off as needed.

16/12/2014

Motor specialist:

Adjust Your Mirrors to Avoid Blind Spots:

16/12/2014

Rules of the Road:

• Don't assume a driver sees you. In fact, imagine that a driver can't.

• Run against traffic so as to view (and react to) any mistake an advancing motorist may make.

• At a stop sign or light, wait for the driver to wave you through—then acknowledge the driver with your own wave.

• Allow at least three feet between you and a passing vehicle.

• Be prepared to jump onto the sidewalk or shoulder of the road.

• During group runs, go single file when cars need to pass.

• Use hand signals to show which way you plan to turn.

• Respect a driver's right to the road.

• Run with proper ID, and carry a cell phone with emergency contacts taped to its back.

• Check with the police for local traffic rules.

• Make sure to look out for people pulling out of a driveway. They may not see you.

• At an intersection always wait and look for vehicles coming from multiple directions and lanes before attempting to cross.

• If you run with headphones, make sure you can still hear what is going on around you. Run with just one ear bud in at a time.

• In commercial areas, look out for high-traffic areas, such as the parking lots of grocery stores, restaurants, and bars.

• Watch for early-morning drivers who do not clear frost or morning dew off their windshields; they may not be able to see you.

• Wear bright and/or reflective clothing.

• Run only on roads with wide shoulders.

• Never cross against traffic lights.

15/12/2014

This page is all about sri vishnu sayee workshop

15/12/2014

15/12/2014

Lights:
One indicator or blinker is flashing faster than the other:

When you indicate one way and the blinker flashes quicker than when you indicate the other way, it means one of the bulbs has blown. An auto parts store will be able to tell you what sort of bulb you need to replace it with and your manual should show you how to get at the indicator bulbs - they're different on every car.

Don't touch the glass when changing headlight bulbs:

Most headlight bulbs now are filled with halogen and have special coatings on the outside of the glass. If you pick the bulb up by the glass with your fingers, you will leave trace amounts of oil and grease on the glass. When the bulb is used, that area of the glass will get hotter than the rest and it will eventually cause the bulb to crack. When changing headlight bulbs, only hold the metal bulb holder at the base, or make sure you're wearing rubber surgical / mechanic's gloves (clean ones) if you're touching the glass.

05/12/2014

Tire Safety and Maintenance:

The four tires on your vehicle are the only things separating you from the road. Are you giving them as much attention as they warrant? Proper tire inflation, tread depth, alignment and rotation can add up to a safer, more cost-efficient ride.

Tire Pressure

When it comes to tire pressure, you want to strike a happy medium. Over-inflated tires ride roughly and wear prematurely at the center of their tread. Under-inflated tires decrease fuel economy, cause imprecise handling, wear prematurely at the
edges of their treads, and can overheat and fail at highway
speeds.

What you can do

Check your vehicle’s tire pressures (including the spare) at least once a month, because tires typically lose about one pound of pressure per month through normal seepage.
For the most accurate reading, check tire pressures when the tires are cold.
Always follow the inflation pressure recommendations in your vehicle owner’s manual or on the tire information label located in the glove box or on the driver’s door jamb.
Do not use the inflation pressure molded into the tire sidewall; this is the pressure needed to achieve the tire’s maximum rated load capacity, and it may or may not be the correct pressure for your particular car.
Tires lose (in cold weather) or gain (in warm weather) about a pound of pressure with every 10-degree change in temperature.
The Bottom Line

Under-inflated tires contribute to more than 600 fatalities and 33,000 injuries annually, according to National Highway Traffic Safety Administration estimates, and they waste more than 1 billion gallons of gasoline each year, based on U.S. Department of Energy estimates.

Correct tire pressure ensures optimum vehicle handling for comfort and safety. And it will make tires last longer and help maximize a vehicle’s fuel economy.



Tire Tread Depth

Having good tires with sufficient tread depth is crucial for driving safety, particularly in wet or snowy road conditions.

What you can do

Check the tread depth of your car’s tires by inserting a quarter upside down into a tire groove. If you can see above Washington’s head at any point, start shopping for new tires.
Uneven or excessive wear of tire tread may indicate the need for suspension repair or wheel alignment, both of which will extend the life of your tires.
Worn tires with little tread are much more likely to hydroplane on wet pavement or lose traction in the snow, resulting in a loss of braking power and steering control.
The Bottom Line

Driving a vehicle with low tread depth puts you at increased risk for a crash. To slow the wear on your tires, keep them properly inflated and perform any needed suspension repairs or wheel alignments in a timely manner.



Tire Balance/Rotation and Wheel Alignment

Proper tire balance and regular rotation help maximize tire life and provide a safer driving experience by preventing uneven wear. Have the tire balance checked if you feel unusual vibrations through the steering or chassis, and rotate the tires at the mileage interval specified in your vehicle owner’s manual. If your tires wear unevenly, or the vehicle “pulls” to the left or right, it is time to have the suspension inspected and the wheels aligned.