Universal Technologies Pvt Ltd

Universal Technologies Pvt Ltd Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Universal Technologies Pvt Ltd, Automotive, aircraft & boat, No 34 nethaji layout 2nd main riad vaderahalli lakshmipura cross vidyaranyapura post, Bangalore.

For enquiry wts me 9900266844
23/10/2018

For enquiry wts me 9900266844

06/10/2018
04/10/2018

24. Fabrication of automated metro train
Abstract - Nowadays the modern technologies are helpful in all aspects of our life. Due to this lots of development done in the field of transportation. In the previous years, with the use of regular metro train accidents occur due to various reasons like the fault of the driver, signal errors and another major problem is, the human-operated metro train has no control over time, mean inaccuracy in time which affect the railway network management system. To solve this problem we have a new concept of the driverless metro train. Driverless metro train improving the management system of the railway network, reduce human errors, consume less power and it provides comfort and safety to passengers during traveling.

04/10/2018

23. Design and Development of Pneumatic stirrup bending machine
Abstract — Major work involved in making Stirrups is done by a human. Stirrups are prepared manually in small construction sites which require effort and also time for production of a few stirrups is more. This leads in slow overall progress of work or requires more labour to save time. Stirrups are square or trapezoidal shape which is used in construction of columns and beams. The main objective of the Project “Design and Development of Pneumatic Stirrup Bending Machine (PSBM)” is to reduce such efforts and also at the same time at a faster rate with a higher Accuracy. The use of Pneumatic system makes it more cost effective for smaller constructors

04/10/2018

22. Automatic Pneumatic Bumper Mission
Introduction :-Today India is the most important under developed country in the world. India is the largest country in the use of various types of vehicles. As the available resources to run these vehicles like quality of roads, and unavailability of new technologies in vehicles are causes for accidents. The number of peoples which are dead during the vehicle accidents is also very large as compared to the other causes of death. Though there are different causes for these accidents but proper technology of braking system and technology to reduce the damage during accident are mainly affects on the accident rates. So today implementation of proper braking system to prevent the accidents and pneumatic bumper system to reduce the damage is must for vehicles. To achieve this system modification goal, design this “Automatic Pneumatic Bumper system”. We have pleasure in introducing our new project “Automatic Bumper System for Four Wheelers”, which is fully equipped by IR sensors circuit and Pneumatic bumper activation circuit. It is a genuine project which is fully equipped and designed for Automobile vehicles. This forms an integral part of best quality. This product underwent strenuous test in our Automobile vehicles and it is good.

04/10/2018

21. Design and fabrication pneumatic vice
Abstract: Work holding and releasing is the most essential act to carry out machining to hold the job in proper position. To release the job quickly and hold the job rigidly. To prevent the vibrations of the job while the machining is carried out We are using mechanical work holding devices. In this project we are dealing with pneumatic vice used in drilling machine In pneumatic type vice one end of piston rod is connected to the movable jaw and the piston slides in the cylinder. Here the air actuates the movement of piston; this in turn actuates the movable jaw. Here the principle movement is only a reciprocating movement.

04/10/2018

20. Design and fabrication of four wheeler steering and headlight moving system
Abstract— The most important of this paper is Front wheel of steering system with moveable headlights with latest technology. The most conventional steering arrangement is to turn the front wheels using a hand–operated steering wheel which is positioned in front of the driver, via the steering column, which may contain universal joints to allow it to deviate somewhat from a straight line. This idea gives more advantages for automobile. It gives the advantages such as low level of steering torque during static steering, increase fuel efficiency or economy, low weight of vehicle because of using EPS system, flexibility in steering system and more space for driver and front passenger.

04/10/2018

19. Fabrication of automatic railway gate control system
Abstract :- The railway gate is to be controlled so that the road traffic is to be predicted .The railway gate is to be closed when a train is passing by the way. The opening and closing of the gate is to be done using stepper motors and this stepper motor is controlled by micro controller. The signaling of the train is also controlled depending upon the gate position. Only when gate is closed the green signal is otherwise red signal. So in this project the railway signaling includes the gate control is done using microcontroller. The automatic opening and closing of the gate and also the signaling which depending on the gate position that will be controlled by the microcontroller.

04/10/2018

18. Fabrication of domestic wind mill mechanism
ABSTRACT :- The continuous increase in demand of electricity makes it necessary for everyone to have its availability and also during power cut-off. For this, people are moving towards the renewable energy sources. Because of its reversibility, the process is highly demanding. Wind is one of the most important renewable energy which drags and sparks the houses because of non-conventional energy sources. Since wind produces power in a cubic relation with the wind speed, people conscience towards the wind sources has increased and also it is free of cost and doesn’t emit any greenhouse gases. In this study, we elucidate the wind energy for power generation at domestic level of use at optimum rate so that people will be benefited through its use.

Address

No 34 Nethaji Layout 2nd Main Riad Vaderahalli Lakshmipura Cross Vidyaranyapura Post
Bangalore
560097

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6am
7pm - 8pm
Wednesday 9am - 6am
Thursday 9am - 6am
Friday 9am - 6am
Saturday 9am - 6am
Sunday 9am - 6am

Website

Alerts

Be the first to know and let us send you an email when Universal Technologies Pvt Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share