SF3 Engineering

SF3 Engineering We manufacture a rang of custom made products for high performance race use and for people looking for a bit more refinement for their everyday car.

From custom made performance bushes to machined parts we cover it all

Latest batch of 50A reinforced e46 prop carriers ready to go! All models instock! Available also check out our reinforce...
12/01/2020

Latest batch of 50A reinforced e46 prop carriers ready to go! All models instock!

Available also check out our reinforced gearbox mounts which can have varied stiffness to suit drift, track or road cars!

Feel free to pm us for prices and other e46 bushes we offer...

Always developing, this is our revised BMW N47n swirl flap b**g.This plug is designed to cover the 2 variants of swirl f...
20/10/2019

Always developing, this is our revised BMW N47n swirl flap b**g.

This plug is designed to cover the 2 variants of swirl flap modules.

Installing to plug assembled covers the earlier versions.
Removal of the screw and top section will shorten the plug and fit the revised versions.

B47 series and N57n series available soon!

These massive bushes are our latest release into the E9X series Subframe (also found in the 1-series). Featuring our sin...
12/05/2019

These massive bushes are our latest release into the E9X series Subframe (also found in the 1-series). Featuring our single part interlocking design as per our e46 series bushes these will be put through their pacing in IDC, BDC and along the drag strip!

Available in strengths from Shore 70A to 95A.

Price for Subframe kit (excluding diff) start at €185 plus delivery.

PM use for further details.

This week's orders ready for dispatch. This order consists of 4 x E46 complete rear end SF3 polyurethane bush set. This ...
06/05/2019

This week's orders ready for dispatch.

This order consists of 4 x E46 complete rear end SF3 polyurethane bush set. This includes rear trailing arm bushes, Subframe bushes and diff bushes.

Our signature single piece bushes and aluminium housed diff bush are typically used for high performance cars for drifting, tracking and drag racing, however, recently we have seen a massive increase in standard power cars looks for more refinement and rear end stability.

PM us for more details and follow us for a bush kit giveaway worth €400 and other promotional offers!!!

Our latest design e46 M3 Subframe bush fresh from the die ready for post processing. This Shore 85A bush is designed for...
06/04/2019

Our latest design e46 M3 Subframe bush fresh from the die ready for post processing. This Shore 85A bush is designed for minimum movement while keeping the drive train solid for over 700bhp!!! Our single piece units have been tested with with over 1000ft lb in road and drift cars achieving fastantic results.

Keep an eye on Andrew Kenna from ECU Masters.ie for updates on performance!!!

SF3 are now branching out into the mens accessories market! 🤣Find your accessory on our eBay page or PM use for details!
13/02/2019

SF3 are now branching out into the mens accessories market! 🤣

Find your accessory on our eBay page or PM use for details!

Our BMW N57 and N57n series swirl flap plugs are now LIVE and ready for dispatch. You can order yours through the eBay l...
04/02/2019

Our BMW N57 and N57n series swirl flap plugs are now LIVE and ready for dispatch. You can order yours through the eBay link below are via private message!

https://www.ebay.co.uk/itm/143117302416

Another set of our new range of cast polyurethane bushes. This full E46 M3 kit will be holding 700+ BHP produced by a cu...
16/01/2019

Another set of our new range of cast polyurethane bushes. This full E46 M3 kit will be holding 700+ BHP produced by a custom N54 housed in an E46.

This kit uses our Shore A 85 hardness polyurethane. This allows a minute amount of movement however when inserted are practically solid due to the 1 piece bush design and interlocking inserts.

Steel inserts were used for the 3 diff bushes and the 2 rear trailing arm bushes due to the massive BHP figures in question ensuring the bushes can withstand the abuse throw at them!

A sneak peak at our latest range of cast polyurethane bushes. Taking on the same form as our turned bushes this range al...
20/12/2018

A sneak peak at our latest range of cast polyurethane bushes. Taking on the same form as our turned bushes this range allows for faster turn-around, hardness classes from Shore 70A to 95A and overall stronger construction due to additives.

These bushes were special order for an 800bhp m54 turbo participating in BDC and IDC. The client has gone for soft m3 diff bushes (70A) and medium Subframe bush (85A) and our stiffest range for the rear trailing arms (95A).

Due to the intense pressure involved the diff mounts are upgraded to steel centres which are cast into the bush for maximum strength and wear resistance.

Enquires welcome. Each kit is made to order allowing for changes on custom orders for high end diesel and petrol cars.

Address

Ballinamona Business Centre, Old Tramore R
Waterford

Alerts

Be the first to know and let us send you an email when SF3 Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share