C.A.S Complete Automotive Solutions

Home
Ireland
Dublin
C.A.S Complete Automotive Solutions

Providing auto electrical, aftermarket modifications and mechanical maintenance services.

09/05/2025

Teamed up with the lads in to help them put a bit more pep in their Audi r8's step... Twin superchargers definitely do the job... All ready for mapping...

22/10/2024

Evo 3 link ecu install on this lovely Evo 3. Ecu fitted with canbus lamda, electric boost control, iat and map sensor to get rid of the afm. Along with the usual hi low boost control and anti lag. Ready for the dyno and then off to the ring next season.

02/09/2024

Slacking lately at posting and taking pictures... Here's a job from awhile ago on this beautiful chaser... Came in for valve stem oil seals, done and dusted without taking the head off saving time and the customer money. Few other oil weepy seals replaced for good measure.. doesn't seem like she smokes 40 a day anymore...

19/05/2024

Another job recently completed... It started off as small job but like all modified cars... Not always that simple. New fpr, walbro 450 fuel pump, fuel filter, can lamda, rewired fuel pump, gearbox out and refitted to make her a 5 speed again, new larger oil cooler, plugs, oil, coolant, primed the engine ready for its first start with new 1.5jz engine, the list goes on...but now she's ready for mapping and getting back to what she does best... Going sideways

05/04/2024

Hard to believe this is the same red celica that has featured before.... Gone though some major changes visually over the last few weeks. Also mechanically a week before it was booked in to be wrapped, disaster but we got it turned around with time to spare... Unfortunately due to oil starvation from a dented sump it completely destroyed the engine(top and bottom end). But back now better than ever with a new heart and new look.

30/03/2024

Many will know this car.... Everyone thought it would be in the scrap pile by now.. but didn't only fix it, it's back 10 times the car it once was... Credit where credit is due. We helped him along the journey wiring up his new loom, fitting a link ecu can gauge, fuse box relocated to the centre console, electric fans, repaired and extended the damaged loom, along with loads of other smalls bits.

21/02/2024

If didn't have bad luck he would have no luck 😂 I had posted I that I wouldnt be taking any bookings for the next 2 weeks... 20 minutes later Craig calls to test this theory and needs a favour 😂 the e36 he had just bought wouldn't select any gears. Anyone else would be told where to go but Craig and Co. are very good customers... All the signs pointed to a weak pressure plate...(I was kinda right) got it up pulled the box off to find a 240mm pressure plate 230mm flywheel and a 220mm clutch disc 😂 with the clutch disc in backwards for good measure 😂 new LUK kit fitted of the correct diameter and she back on the road all within less 48 hours of him calling. Not much pictures as it's hard to squeeze in a job like this between everything else going on....

13/02/2024

Call out today to this caterham style kitcar... In my favourite colour I might add.. misfire and hesitation... Plug leads tested as you can see one normal resistance reading and the other more than twice the expected value. New leads, plugs and coil ordered 🤞 it will be back motoring soon.

12/02/2024

Full air performance Air Ride system install on the beaut of a Toyota celsior... Freshly imported from Japan and in amazing shape. Turned out well with a nice simple boot install trying to be as friendly to the car as possible, no unnecessary holes ect as parts these days are difficult to find and maybe it might go back to standard in the future.

11/02/2024

Nice a simple call out from yesterday... Carbon wheel with integrated display fitted and wired on this peach of a bagged gt86 🍑

06/02/2024

A rare one today... This stagea (estate skyline) with an R34 front in for some wiring. It has been converted to rb26, but the abs, clocks, lights ect were integrated into the original rb25 loom. So the easiest solution was to strip back the original loom to make an adapter loom of sorts and retain only the what was needed and make it work with the emb aftermarket ecu. Now have fully functional Clocks, abs and lights. Hope to see this car back on the road soon 🤞🤞

01/02/2024

Another day another wiring problem... This soar kept blowing the ig1 fuse randomly... Intermittent problems are probably the hardest to diagnose as the problem is not always present. After a bit of routing around we found a few questionable wiring jobs, which were put right but not the cause of the problem. But finally found the smoking gun. When the car was manual converted in Japan part of the loom was routed incorrectly and interfering with the clutch pedal. Loom was repaired and routed correctly and the owner was on his way...

Address

Dublin

Website

https://instagram.com/c.a.s_automotive?igshid=M2RkZGJiMzhjOQ%3D%3D

Alerts

Be the first to know and let us send you an email when C.A.S Complete Automotive Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Cars & Car Service in Dublin?