Teak-decking • Re-caulking • Interior varnishing and repairing• Wooden
yacht restoration.
-there are still custom carpenters out there that can create and build your needed items. If you have had teak in the past, this would have been removed, and the fiberglass would be sanded to a 60 grit profile, paying close attention to any existing screw holes, or weak spots in the deck. On delivery day, we
get to lay out the teak deck, and dry fit for looks and fit. Any minor modifications to shape, and fit are done over the next few days, in preparation for adhesion to the deck
3. Once the spacing, position, and fit are satisfactory, we proceed to epoxy the deck in place using a 1:1 ratio of specially formulated epoxy that remains slightly malleable during its life. The nature of boats is such that a solid foundation of products that set up stiff, will almost certainly crack and fail when the boat flexes and torques during its normal usage.
4. After all parts of our puzzle have been adhered to the deck, 24-48 hours of dry and set up time is necessary to ensure a proper adhesion before spacers and screws are removed. At this point inspection of the seams to clear out any extra epoxy, and final spacing is conducted. We are now ready to tape off the seams and apply a bead of caulking to any of the seams open, during the process of assembly. Another 48-72 hours of dry time is allowed for the caulking to set up before any final sanding is performed.
-NEW TEAKWhen it comes to the look of your decks, nothing shows like a new teak deck. The fit and finish of our decks will bring class and beauty to your cockpit, foredeck and companionways.
-TEAK STORAGE BOXOur Teak storage box have storage space to accommodate all your outdoor essentials. Louvered sides, front and back allow fresh air to circulate
-GANGWAYS
Manufactured from the best quality Burma teak our gratings represent products of the highest standard. Products built to withstand the demanding conditions of the marine environment.
-WHY SAND A TEAK DECK? The primary reason for sanding a teak deck relatively smooth is to allow moisture and contaminants to run off the decks rather than become entrapped on the deck surface. The softwood between the grain lines wears and deteriorates faster than the hardwood of the grain lines. As a result, the wood develops a raised grain or rough surface.
-TEAK PLUGSAs a teak deck ages, one of the first things to go are the plugs in the screw holes. Over time the deck gets thinner and eventually the plugs will loosen and fall out. A telltale sign of the plugs starting to loosen is a black ring around the plug caused by mildew as water flows around the plug.
RE-CALUKINGWhen you start to notice moisture in the sealant.When the sealant starts to melt and when it loses its properties or simply disappears due to lack
of teak.
-YACHT TABLETeak yacht table is guaranteed to add to the splendor of any sailboat or yacht, and nothing can beat an inlaid teak design for beauty, quality, and appeal. Adding an inlay design to one of our custom made yacht tables makes a one of a kind table every time.
-TOTAL REFITIf you decide to completely reefit your ship and 99% of the outer part of the ship is wood, feel free to contact us and we will do our best to make the ship look like new.
-INTERIOR AND EXTERIOR PAINTINGWhen we talk about the interior of a ship he is a mirror of every ship owner and his care for the ship. Damage to the interior is a sign that the boat is in use and it is good for the boat. All these small irregularities and damages can be repaired and there is no need to worry about it, just call and we will make an assessment of the damage and make an offer for you to make the interior look like new again.
