MP Motorsport

MP Motorsport Χονδρικό εμπόριο ,ειδών αυτοκινήτου , εξοπλισμός αγωνιστικών αυτοκινήτων, karting ,sportswear.

SPARCO QRT-V FIBREGLASS 4.5Kg • FIA 8855-1999 Approved• Lightweight QRT Technology Shell• Only 4.5Kg Weight• Non Slip M...
27/12/2017

SPARCO QRT-V FIBREGLASS 4.5Kg
• FIA 8855-1999 Approved
• Lightweight QRT Technology Shell
• Only 4.5Kg Weight
• Non Slip Material On Shoulders And Seat Base
• Large Shell Size
• Retail Price 840 euro

• NEW FIA 8853-2016 Approved• SPECTRA Webbing• Ultra Lightweight Only 1.3Kg• Saloon Car Compatible• HANS/FHR Specific• L...
27/12/2017

• NEW FIA 8853-2016 Approved
• SPECTRA Webbing
• Ultra Lightweight Only 1.3Kg
• Saloon Car Compatible
• HANS/FHR Specific
• Lightweight Aircraft Style Buckle
• Retail Price 464 euro

• NEW FIA 8853-2016 Approved• 3 Inch Shoulder And Lap Straps• Snap On And Roll Cage Fixings• Steel Adjusters• Aluminium ...
27/12/2017

• NEW FIA 8853-2016 Approved
• 3 Inch Shoulder And Lap Straps
• Snap On And Roll Cage Fixings
• Steel Adjusters
• Aluminium Aircraft Buckle
• Retail price 278 euro

NEW for 2018, "APEX" is a mid cut boot made up from two materials. A synthetic leather upper is enveloped by a genuine l...
27/12/2017

NEW for 2018, "APEX" is a mid cut boot made up from two materials. A synthetic leather upper is enveloped by a genuine leather base to allow for a better moulding of the foot. A unique ankle closure gives great support whilst the rear of the boot is fully elasticated, allowing for ultimate ankle movement without restriction. A quick closure lace up system and full ankle Velcro® closure optimises fit and comfort.
FIA 8856-2000 approved RRP 200 euro

This fibreglass shell seat from Sparco has been developed for taller / larger drivers. Suitable for both side or base mo...
05/01/2017

This fibreglass shell seat from Sparco has been developed for taller / larger drivers. Suitable for both side or base mounting the Alpha competition seat is constructed using a new ultralight lamination process which creates a more rigid and safer shell. The seat cover has been reinforced in areas prone to wear. A low profile leg cushion offers added safety by keeping the legs inside the seat shell. Harness slots make the Alpha seat suitable for use with 4, 5 or 6 point harnesses. FHR / HANS device compatible
FIA Approved Λιανική τιμή : 735 ευρώ. Αναμένεται από 3 - 6 εβδομάδες

All the same great features as the Gamma KB-4 karting boots but in smaller sizes for kids.The Sparco Gamma KB-4 is a kar...
16/11/2016

All the same great features as the Gamma KB-4 karting boots but in smaller sizes for kids.
The Sparco Gamma KB-4 is a kart boot is made from a combination of hard wearing breathable 3D microfibre fabric and suede.
Padded reinforcement around the ankle helps protect the driver and a breathable inner lining maintains comfort. Anatomical insoles with impact absorption area at the heel. The soles on the Gamma KB-4 boots are asymmetrical and feature reinforcement to the outer sides of the toes and inner rear area, whilst providing grip in both wet and dry conditions.
The boots are ideal for karters at all levels.
For larger child sizes see the Mercury KB-3 kart boots in the 'alternative' section.

Size from 26-34 Price 72 euro
Size from 36-48 Price 85 euro

The newTrack KG-3 kart glove from Sparco features internal stitching and high grip silicon printed palms, designed to im...
16/11/2016

The newTrack KG-3 kart glove from Sparco features internal stitching and high grip silicon printed palms, designed to improve grip on the steering wheel. The elasticised fabric and palms made from synthetic suede with printed silicone offer excellent scuff resistance. Track KG-3 karting gloves have elasticised wrists to ensure a perfect fit and suede pullers help when putting on the glove.
Available in sizes ###XS to XXS making the gloves suitable for younger boys and girls starting out in go karting from bambino class to cadet. Price 39 Euro

The Track KS-1 from Sparco is a 2 layer kart suit for races where a CIK-FIA approval is not needed. Constructed from a l...
16/11/2016

The Track KS-1 from Sparco is a 2 layer kart suit for races where a CIK-FIA approval is not needed. Constructed from a lightweight abrasion resistant outer material with a perforated, breathable inner lining for comfort.
The Track KS-1 karting suit has a material weight of approximately 250 gr/sq m. Τιμή: 149 euro (αναμένονται)

Taking the popular Sparco Pro-ADV seat as a starting point, the Pro ADV TS is a fibreglass seat which is designed for s...
06/06/2016

Taking the popular Sparco Pro-ADV seat as a starting point, the Pro ADV TS is a fibreglass seat which is designed for smaller cockpit cars where space is limited. Weighing almost 2kg less than the the standard Pro ADV this seat features a narrower head protection area (only 400mm wide) which not only makes installation easier but also offers the driver better head support. Large harness slots have been added to remove the need to disassemble harnesses when removing the seat.

The Pro ADV TS offers excellent side support and features non slip fabric on the shoulders. The fixed back design is both strong and light due to its fibreglass shell construction and is compatible for use with a 6 point harness and a HANS device. Black only.

FIA Approved

Omega K1 karting neck collar. Thanks to continuous innovation and research in materials, helmets, suits and rib protecto...
04/04/2016

Omega K1 karting neck collar. Thanks to continuous innovation and research in materials, helmets, suits and rib protector Sparco are able to provide karting drivers a high level of protection. However neck and spine areas are still sensitive and often subjected to serious injuries. Omega, in collaboration with a team of doctors and specialists, has worked hard to develop a new protection system, the Sparco DPC, to protect these sensitive areas. The result is extremely comfortable.

The Shadow KB-7 is a mid cut kart boot from Sparco made from calf leather with ultra light perforated mesh panels ensuri...
24/02/2016

The Shadow KB-7 is a mid cut kart boot from Sparco made from calf leather with ultra light perforated mesh panels ensuring maximum breathability with minimum weight. A single Velcro strap keeps the kart boot firmly in place and avoids ankle flex while an anatomic inner sole with 'plant support' provides high levels of control.
A newly designed 'K01' sole is ultra thin with high grip and is made from natural oil resistant rubber and offers superb feel on the go kart pedals.
The Shadow KB-7 is available from EU 36-48 sizes making them suitable for most karters from kids in cadets to adults
Retail price 140 euro

The Bell KC7-CMR is a karting specific helmet based on the same design as the top of the range HP7 carbon helmet, as use...
24/02/2016

The Bell KC7-CMR is a karting specific helmet based on the same design as the top of the range HP7 carbon helmet, as used by some F1 drivers. Constructed using an ultra lightweight Carbon/Kevlar/Glass hand laminated shell with a 2mm double screen anti fog visor for perfect visibility in all conditions. The shell of the KC7-CMR is designed to provide the optimum visor location which improves aerodynamics and reduces noise.
The powerful top and chin bar ventilation keeps the drivers head cool thanks to a total of no less than 14 air intakes and extraction channels.
A range of accessories including different visor options, spoilers and air intakes are available separately.

Helmet weights -
Sizes 52-56cm - 1185g ( /-3%)
Sizes 57-59cm - 1230g ( /-3%)

Snell CMR-2007 approved

Λιανική τιμή 585 euro

Address

Λεωφ. Καματερού 82
Kamaterón
13451

Telephone

210 2318130

Website

Alerts

Be the first to know and let us send you an email when MP Motorsport posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share