ZZR Works

ZZR Works Service and maintenance of ZZR 1400’s, and the Ninja H2 range. Suspension service and setup.

Genuine seals and all assembled.Ready to sell!
19/09/2026

Genuine seals and all assembled.

Ready to sell!

19/09/2026
Got these spare Brake Calipers in for a complete strip and overhaul.I’m seeing more and more of these suffering from cor...
19/09/2026

Got these spare Brake Calipers in for a complete strip and overhaul.

I’m seeing more and more of these suffering from corrosion on the pad rests.

Keep those calipers cleaned!!

MOT morning, all passed!
17/09/2026

MOT morning, all passed!

Time for a serious change in the garage.The H2 is finally going up for sale.This is the original 2015 model that started...
16/09/2026

Time for a serious change in the garage.

The H2 is finally going up for sale.

This is the original 2015 model that started the road going supercharged revolution. Green frame.

I purchased this back in August 2017, with just 43 miles on the clock. It now shows just 3,788.

The bike has not had any silly exhausts or ECU reflashing done, so is completely standard, just as it left the showroom.

The only upgrades are to the suspension. The forks have been fitted with Ktech IDS 25 full cartridge kits, with various spare springs.

Rear shock has been serviced and revalved by Ktech too.

There are quite a few spares included, such as a 2016 clutch upgrade, still in the box and never fitted.
Spare Fuel Tank.
The original exhaust. It has always had the Carbon Ackro fitted.
Spare ECU and a new Shift Sensor to convert to downshift blipper. Never fitted.
Genuine paper Service Manual.
Kawasaki Comfort Bars. These change the angle and height of the standard bars. With the matching Bar end Weights.
Front and rear paddock stands.
Evotech Performance Rad guard.
Evotech Performance Front and Rear axle sliders.
A matching set of BST Carbon Wheels, originals also present.
Oberon Clutch Slave cylinder. Much smoother than the originals.
Zero Gravity tinted screen. And original included.
Scorpion Tracker fitted and currently active. Can be transferred to new owner.
R&G frame bungs.
A Vandeamon style pipe, never fitted also included.

Service History. This bike has been constantly over serviced with Oil and Filter changes. Steering and all Suspension Bearings stripped, cleaned and greased.

A brand new genuine nosecone and tailpiece will be fitted on sale completion. As they have some marks, and I am very fussy.

I will fit and balance a brand new set of tyres for the new owner, their choice.

The entire bikes history is documented on the Zx14r.co.uk forum. 43 pages worth!

Price is £26k, or serious offers in person.

Located Worthing, West Sussex.

For Sale.Gen 1 Akro’s, with all mounting hardware, and, the genuine cats.No baffles, but easily obtained online from A16...
16/09/2026

For Sale.

Gen 1 Akro’s, with all mounting hardware, and, the genuine cats.
No baffles, but easily obtained online from A16 Road and Race etc.

Carbon tips in perfect condition.

LHS can has dent on the inside from a swingarm bobbin. Not visible when fitted.

Link pipes in excellent condition. No scrapes or dents.

Link pipe connection to downpipes is 55mm.

Will only fit the 08-11 Gen 1 bikes. Not the earlier years!

£500 collected from Worthing. Or can post at cost.

Vals GTR was ‘bumped’ by a forklift at work.Main dealer quoted nearly £2.5k to replace the parts!!We got the bike back o...
16/09/2026

Vals GTR was ‘bumped’ by a forklift at work.

Main dealer quoted nearly £2.5k to replace the parts!!

We got the bike back on the road for a lot less.

I even had the exact colour matched front mudguard in stock. And the Brembo rotors are always in stock too…

All done and ready for a fresh MOT on Thursday!
15/09/2026

All done and ready for a fresh MOT on Thursday!

New brake lines and fresh DOT 4’s.AcF50 applied too…
15/09/2026

New brake lines and fresh DOT 4’s.

AcF50 applied too…

Brake reservoir screw was seized, so destroyed reservoir!I had a spare in stock, luckily.System drained for HEL lines to...
14/09/2026

Brake reservoir screw was seized, so destroyed reservoir!
I had a spare in stock, luckily.
System drained for HEL lines to be fitted….

Address

88 Broadwater Road
Worthing
BN148AW

Telephone

+447808861823

Website

Alerts

Be the first to know and let us send you an email when ZZR Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ZZR Works:

Shortcuts

Share