Autocraft Midlands

Autocraft Midlands Small midlands uk based company specialising in Japanese engines

some k series build pics
22/03/2026

some k series build pics

Huzaifas k24 build made just over 300  bhp, rev limit set at 9300, no 5 years of running in, drove straight to the Dyno ...
02/06/2025

Huzaifas k24 build made just over 300 bhp, rev limit set at 9300, no 5 years of running in, drove straight to the Dyno after one oil change, probably could make a little more as the exhaust chokes down to less than 2.5 inches at one point, but none the less a very strong car

Toyota 4age turbo build, aiming for 500hp+,, due to the age of the blocks I’ve had to go through about 4 of them to find...
22/05/2025

Toyota 4age turbo build, aiming for 500hp+,, due to the age of the blocks I’ve had to go through about 4 of them to find one worthy of the shiny parts,, most are rusted extremely, hairline cracked or way past the service limit,, head has had some and is also going to get more special treatment,, a plethora of parts from Japan, Europe, USA,,, New Zealand,,, block is going to be o-ringed, almost full filled at least 3 quarters of the way. Enjoy people

Phenomenal setup, high comp k24, drag cartel cams full valve train,Oem Honda type r bearings, baffled sump, ported pump,...
21/05/2025

Phenomenal setup, high comp k24, drag cartel cams full valve train,
Oem Honda type r bearings, baffled sump, ported pump, balanced aka vibration free.. I might have to buy another dc5 just to put a setup like this in it

MUGEN Oil Filter. To ensure optimum performance from your engine it is crucial that the internal lubricants can work as ...
01/05/2025

MUGEN Oil Filter. To ensure optimum performance from your engine it is crucial that the internal lubricants can work as efficiently as possible. The engineers at Mugen developed their oil filter with this firmly in mind. With its Y shaped internal filter it catches any impurities and sludge in the oil to minimize contaminants being recirculated through the engine. With an anti-heat acrylic rubber gasket and silicone rubber sealer this oil filter from Mugen has no problem dealing with the high temperatures of driving with VTEC engaged. This filter works up to 36% more efficiently than the OEM filter!

Integra all models inc imports DC5

Civic type"R" inc imports k20a2 k20a jdm, k20 all including fd2 fk and fn2/ep3








r
https://www.ebay.co.uk/itm/266317059382?mtype=img&mkcid=16&mkevt=1&ssspo=5wPm8g6lSDm&ssuid=5wPm8g6lSDm&media=FB&widget_ver=freya&mkrid=710-127635-2958-0&sssrc=4256139&jobId=e4aa6967-52c0-43fc-ad42-83c2a6dbfe1c

civic type r ep3 k20a2 ported oil pump kit, skunk2 sump baffle, mugen race oil filter, billet Lower chain guide, full  r...
01/05/2025

civic type r ep3 k20a2 ported oil pump kit, skunk2 sump baffle, mugen race oil filter, billet Lower chain guide, full race and circuit kit for k24 frank builds, or any other honda k series race engine

13441-PCX-004, 13450-PNA-004, 13460-pna-004, 15100-PRB-A01, 15100PRBA01, 4PR-KPUMP, 368-05-0100







-swap
oil pump
#15100-PRB-A01

Finally tightened up the k24 frank, ported pump and baffle kit also installed,, built using oem Honda bearings
21/04/2025

Finally tightened up the k24 frank, ported pump and baffle kit also installed,, built using oem Honda bearings

some extra work needed for the dc 4 camshafts, needed to limit the vtc gear, people do not realise how much more difficu...
18/04/2025

some extra work needed for the dc 4 camshafts, needed to limit the vtc gear, people do not realise how much more difficult it is to build a NA high comp+high rpm engine over a turbo/boosted one

k20a2 pro head built for the k24 frank
17/04/2025

k20a2 pro head built for the k24 frank

k24 frank
17/04/2025

k24 frank

bmw e30 m3 s14 b23 rebuild pics, enjoy people, apologise ive not posted much recently and have been absent from Facebook
09/04/2025

bmw e30 m3 s14 b23 rebuild pics, enjoy people, apologise ive not posted much recently and have been absent from Facebook

Address

Wolverhampton
WESTMIDLANDS

Opening Hours

Monday 10am - 5pm
Tuesday 10am - 5pm
Wednesday 10am - 5pm
Thursday 10am - 5pm
Friday 10am - 3pm

Telephone

+447870627500

Alerts

Be the first to know and let us send you an email when Autocraft Midlands posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Autocraft Midlands:

Share