CHG Classics

12/08/2026

We will be at the RSSOC Scimfest this weekend.

We are taking our usual selection of goodies, if there is anything specific you would like, drop us a message and we can take it for you :)

26/07/2026

It’s that time of year again when we are taking a weeks break, so please note we will be closed between Monday 3rd August to Sunday 9th August inclusive. We will process all orders placed the weekend before close and dispatch them the morning of Monday 3rd. We will then process all ordered when we re-open on Monday 9th.

Thank you for your understanding!

06/07/2026

So some of you know and some don’t, 8 months ago I started working at Sainsbury’s. This is night work to help the house build Louise and I are working on.

Louise is fully on top of the mail order than come in via website and eBay. She does an amazing job. I come into the office around 2pm on Mondays, Tuesdays and Wednesdays. So please email where possible.

I had two choices, increase prices or do something else. I’ve always been passionate about keeping prices low for Reliant owners as much as possible so the second option was the obvious one!

I will say this now. CHG is going NOWHERE. I will not tolerate any misinformation by people. We are still developing new parts and still building bigger and better.

Thank you for your understanding, it’s what I feel I had to do as a husband and father to build our hoke for our family as quickly as possible.

18/06/2026

Part number 32000 Bonnet pivot bolt back in stock.

We have revised the design with 3mm more thread on. We found with modern rivnuts that the original ones were a touch short.

We will be selling them individually or as a kit below with new m6 rivnuts.

Older models used 1/4 unf nuts and pivot bolts so if replacing these you will need our kit with new rivnuts aswel.

08/06/2026

Essex V6 engine lifting brackets available soon!!

😎

04/06/2026

Our OE fuel pumps are back in stock.

Brand new Genuine R Part fuel pump for the 850cc engine. This fits all 850cc engines with the black insulating spacer. Failure to have the spacer will damage the pump.

07/05/2026

Our push on Speedo cables are back in stock, hoping the screw on will be following shortly!

https://chgclassics.co.uk/products/speedo-cable-push-on?_pos=1&_sid=e280d253a&_ss=r

Brand new UK made speeco cable for Robin, Rialto, Fox and Kitten models upto approx 1997 with the push on end for the large smiths speedo. Comes with the grommet on the cable for sealing it to the bulkhead.

01/05/2026

Nothing better than to get the spray gun out when it’s hot weather 😎

01/05/2026

Reliant Kitten/Fox lower wishbone nuts now zinc plated and available in our shop.

These are slightly thicker steel than originals and the correct UNF thread.

https://chgclassics.co.uk/products/lower-wishbone-nut?_pos=1&_sid=a30d9347c&_ss=r

29/04/2026

This is what a spring washer looks like after a piston has hammered it to death!

When removing the carb for work, please put a piece of cloth in/over the inlet manifold to avoid this happening!